DSX-3
Coaxial Cable Assemblies,
Connectors and Tools
To complement ADC’s DSX-3 products, a variety of coaxial
cable assemblies, connectors, and tools are available.
These products are designed to support technicians in
patching, testing, and cross-connecting operations.
Features:
• Manufactured to exacting specifications, meeting the
industry’s highest standards
• Configurable cable assemblies and jumpers support
specific network requirements
• Patch cord kits and tool kits simplify ordering
Patch Cords
DSX-3 Patch Cords with RG59 Type Cable
To patch between DSX-3 jacks
Catalog Number
Coaxial Cable Assemblies
PCH-MMXB-003
PCH-___ XB- ___
Plug Type**
MM
Midsize plugs (both ends)
SS
Standard size plugs (both ends)
BB
BNC connector (both ends)
Patch Cord Length*
XXX
Length in feet
(001 thru 050)
Ordering Example:
Catalog number PCH-MMXB-012: 12' (3.66 m) patch cordwith MIDSIZE
plugs on both ends.
**Midsize Plug:
Diameter = .298" (.76 cm)
**Standard Size Plug:
Diameter = .375" (.92 cm)
PCH-SSXB-003
*Standard patch cords length:
3', 6', 9', 12', 15', 18', 20', 25', 30', 35',
40', 45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49, 6.1, 7.63, 9.15, 10.68,
12.22, 13.73, 15.25 m)
PCH-BBXB-003
Conversion Patch Cords with RG59 Type Cable
To patch between different size jacks, such as DSX-3 jacks to test set jacks
Catalog Number
292
PCH-___ XB- ___
Plug Type**
MS
BM
BS
Midsize plug to Standard size plug
BNC connector to Midsize plug
BNC connector to Standard size plug
Patch Cord Length*
XXX
Length in feet
(001 thru 050)
PCH-MSXB-003
8/00
•
Ordering Example:
Catalog number PCH-MSXB-012: 12' (3.66 m) patch cord with
MIDSIZE plug on one end and STANDARD size plug on the other end.
**Midsize Plug:
Diameter = .298" (.76 cm)
**Standard Size Plug:
Diameter = .375" (.92 cm)
PCH-BMXB-003
*Standard patch cords length:
3', 6', 9', 12', 15', 18', 20', 25', 30', 35',
40', 45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49, 6.1, 7.63, 9.15, 10.68,
12.22, 13.73, 15.25 m)
PCH-BSXB-003
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
2
Patch Cords
Start-up Kits
These convenient kits contain a variety of cords and plugs for inital circuit turn-up and on-going
maintenance such as testing, patching and cutover operations.
Coaxial Cable Assemblies
Ordering Information
Description
Small Start-up Kit:
for remote offices, CEVs,
OSP cabinets, customer premises
Kit includes:
(2) 75
Ω
termination plugs
(2) 9" (22.86 cm) looping cords
(2) patch cords - 3' (.92 m)
(2) patch cords - 6' (1.83 m)
(2) BNC conversion cords - 6' (1.83 m)
(2) Midsize plug to standard size plug
conversion cords - 6' (1.83 m)
Medium Start-up Kit:
for local central offices
Kit includes:
(12) 75
Ω
termination plugs
(12) 9" (22.86 cm) looping cords
(4) patch cords - 3' (.92 m)
(4) patch cords - 6' (1.83 m)
(2) BNC conversion cords - 6' (1.83 m)
(2) Midsize plug to standard size plug
conversion cords - 6' (1.83 m)
Large Start-up Kit:
for large local or toll offices
Kit includes:
(24) 75
Ω
termination plugs
(24) 9" (22.86 cm) looping cords
(8) patch cords - 3' (.92 m)
(8) patch cords - 6' (1.83 m)
(8) patch cords - 12' (3.66 m)
(2) BNC conversion cords - 6' (1.83 m)
(2) Midsize plug to standard size plug
conversion cords - 6' (1.83 m)
Midsize Plugs
ACK-PCH-M1
Standard Size Plugs
ACK-PCH-S1
CP1501N
PCH-MMXB-000-009
PCH-MMXB-003
PCH-MMXB-006
PCH-MBXB-006
PCH-MSXB-006
CP1900
PCH-SSXB-000-009
PCH-SSXB-003
PCH-SSXB-006
PCH-BSXB-006
PCH-MSXB-006
ACK-PCH-M2
CP1501N
PCH-MMXB-000-009
PCH-MMXB-003
PCH-MMXB-006
PCH-MBXB-006
PCH-MSXB-006
ACK-PCH-S2
CP1900
PCH-SSXB-000-009
PCH-SSXB-003
PCH-SSXB-006
PCH-BSXB-006
PCH-MSXB-006
ACK-PCH-M3
CP1501N
PCH-MMXB-000-009
PCH-MMXB-003
PCH-MMXB-006
PCH-MMXB-012
PCH-MBXB-006
PCH-MSXB-006
ACK-PCH-S3
CP1900
PCH-SSXB-000-009
PCH-SSXB-003
PCH-SSXB-006
PCH-SSXB-012
PCH-BSXB-006
PCH-MSXB-006
8/00
•
292
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
3
Cross-Connect Jumpers
Cross-connect jumpers are available in a variety of configurations to
match the type of DSX-3 cross-connect interface and meet specific
network requirements. All cross-connect jumpers are equipped with a
messenger wire and tracer pins to provide tracer lamp identification
between the two DSX-3 positions being connected together.
Coaxial Cable Assemblies
8/00
•
292
Options
Connector Interface Types
Connector types must be matched to the type of DSX-3 cross-connect interface. Typically both ends of
the cross-connect jumper have the same type of connector interfaces. Only in rare conditions are the
connectors different between ends; for example, when matching up to different type DSX systems.
Cross-connect jumpers are available with connectors factory terminated on both ends, or with one end
factory terminated and the second connector shipped unattached for field termination by the cus-
tomer. This allows the customer to fit the jumper to the installation and eliminate excess jumper slack.
Cable Types
This is a customer preference depending on system density requirements and transmission limits. For
example, the miniature type coaxial cables (i.e. 735A and 0222 type) greatly reduce jumper conges-
tion. In addition, the miniature coaxial jumpers are available in dual cable types (2 coaxial conductors
contained in one overall jacket) providing the convenience of installing one dual jumper as opposed
to two single jumpers. The dual jumper's two coaxial conductors are color-coded (red and white) for
identifying transmission directions. The overall outer jacket provides additional physical protection.
Lengths
Cross-connect jumpers are available in one foot (.305 m) increments up to 50 feet (.305 to 15.25
m). Typically a customer will stock an in-house supply containing a limited variety of lengths depend-
ing on the size of the DSX environment (i.e. 3', 6', 9', 12', 15', 18', 20', etc.)
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
4
Cross-Connect Jumpers
Rear Cross-Connect DSX-3 Products, Factory or Field Terminated
Catalog Number
Connector Interface Type on
First End of Jumper
B
T
XCC- ___ ___ X ___ - ___
Coaxial Cable Assemblies
Factory terminated BNC connector
(4J, 4U, 4H, 4M compatible)
Factory terminated TNC connector
(4U, 4H, 4M compatible)
Jumper Length*
XXX
Length in feet
(001 thru 050)
Connector Interface Type on
Second End of Jumper
B
T
Factory terminated BNC connector
(4J, 4U, 4H, 4M compatible)
Factory terminated TNC connector
(4U, 4H, 4M compatible)
*Standard Jumper Lengths (Factory Terminated):
3', 6', 9', 12', 15', 18', 20', 25', 30', 35', 40',
45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49,
6.1, 7.63, 9.15, 10.68, 12.2, 13.73, 15.25 m)
Ordering Example:
Catalog number XCC-BBXD-015: 15' (4.58 m) dual
cross-connect jumper using 735A type coaxial
cable with tracer messenger wire, (2) BNC
connectors and tracer pin factory terminated
on both ends of cable.
OR
Connector Interface Type on
Second End of Jumper
1
0
Field terminated BNC connector
(4J, 4U, 4H, 4M compatible)
Field terminated TNC connector
(4U, 4H, 4M compatible)
*Standard Jumper Lengths (Field Terminated):
10', 20', 30', 40', 50' (3.05, 6.1,
9.15, 12.2, 15.25 m)
Ordering Example:
Catalog number XCC-B1XD-010: 10' (3.05 m) dual
cross-connect jumper using 735A type coaxial cable
with tracer messenger wire, (2) BNC connectors and
tracer pin factory terminated on one end of cable, (2)
BNC connectors and tracer pin shipped unattached for
field termination by customer on other end of cable.
Coaxial Cable Type
B
Single RG59 with tracer messenger wire
(4M compatible)
Single 735A with tracer messenger wire
(4J, 4U, 4H, 4M compatible)
Dual 735A with tracer messenger wire
(4J, 4U, 4H, 4M compatible)
Single 0222 with tracer messenger wire
(4J, 4U, 4H, 4M compatible)
Dual 0222 with tracer messenger wire
(4J, 4U, 4H, 4M compatible)
292
C
D
J
K
•
XCC-BBXD-003
Connector(s) and tracer
pins are factory terminat-
ed on both ends.
8/00
XCC-B1XD-003
Connector(s) and tracer
pin are factory terminat-
ed on one end. The con-
nector(s) and tracer pin
for the other end are
shipped unattached for
customer termination.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
5
京公网安备 11010802033920号
EEWORLD
