1N6103 thru 1N6137A
and 1N6139 thru 1N6173A
SCOTTSDALE DIVISION
Voidless-Hermetically-Sealed Bidirectional
Transient Suppressors
DESCRIPTION
This series of industry recognized voidless-hermetically-sealed Bidirectional Transient
Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-19500/516 and are
ideal for high-reliability applications where a failure cannot be tolerated. They provide
a Working Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package
sizes for 500 W and 1500 W ratings. They are very robust in hard-glass construction
and also use an internal metallurgical bond identified as Category I for high reliability
applications. Both of these are also military qualified to MIL-PRF-19500/516. These
devices are available as both a non-suffix part and an “A” suffix part involving different
voltage tolerances as further described in note 4 on page 2. These devices are also
available in a surface mount MELF package configuration by adding a “US” suffix (see
separate data sheet for 1N6103US thru 1N6173AUS). Microsemi also offers
numerous other TVS products to meet higher and lower peak pulse power and voltage
ratings in both through-hole and surface-mount packages.
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
http://www.microsemi.com
APPEARANCE
“E” Package
WWW .
Microsemi
.C
OM
“G” Package
FEATURES
•
•
•
•
•
High surge current and peak pulse power provides
transient voltage protection for sensitive circuits
Triple-layer passivation
Internal “Category
I”
metallurgical bonds
Voidless hermetically sealed glass package
JAN/TX/TXV military qualifications available per MIL-
PRF-19500/516 by adding JAN, JANTX, or JANTXV
prefix (consult factory for 1N6103 and 1N6138)
JANS available for 1N6103A thru 1N6118A per MIL-
PRF-19500/516 as well as further options for screening
in accordance with MIL-PRF-19500 for JANS on all
others in this series by using a “SP” prefix, e.g.
SP6119A, SP6143A, etc.
Surface Mount equivalents are also available in a
square-end-cap MELF configuration with a “US” suffix
(see separate data sheet)
•
•
•
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Military and other high reliability transient
protection
Extremely robust construction
Extensive range in Working Peak “Standoff”
Voltage (V
WM
) from 5.7 to 152 V
Available as either 500 W or 1500 W Peak Pulse
Power (P
PP
) using two different size packages
ESD and EFT protection per IEC6100-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per select levels
in IEC61000-4-5
Flexible axial-leaded mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method
1020
Inherently radiation hard as described in
Microsemi MicroNote 050
•
•
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
Operating & Storage Temperature: -55
o
C to +175
o
C
•
CASE: Hermetically sealed voidless hard glass
o
with Tungsten slugs
•
Peak Pulse Power at 25 C: 500 Watts for 1N6103 to
•
TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)
1N6137A and 1500 Watts for 1N6139 to 1N6173A @
over copper. Note: Previous JANS inventory had
10/1000 µs (also see Figures 1,2 and 3)
solid Silver (Ag) axial-leads and no finish
•
Impulse repetition rate (duty factor): 0.01%
•
MARKING: Body painted and part number, etc.
•
Steady-State Power: 3.0 W for 1N6103 to 1N6137A and
o
•
POLARITY: No polarity marking for these
5.0 W for 1N6139 to 1N6173A @ T
L
= 75 C @3/8 inch
bidirectional TVSs
lead length from body (see Figure 4)
•
Tape & Reel option: Standard per EIA-296
•
Steady-State Power: 2.0 W for 1N6103 to 1N6137A and
3.0 W for 1N6139 to 1N6173A @ T
A
=25
o
C (see note
•
Weight: 750 mg for 500 Watt (E Package)
below and Figure 5)
1270 mg for 1500 Watt (G Package)
•
Thermal Resistance @ 3/8 inch lead length:
•
See package dimensions on last page for both the
33.5
o
C/W for 1N6103 to 1N6137A and 20.0
o
C/W for
“E” and “G” size packages
1N6139 thru 1N6173A
•
Solder Temperatures: 260
o
C for 10 s (maximum)
NOTE:
Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where T
OP
or T
J(MAX)
is not exceeded.
Copyright
©
2010
03-30-2010 REV F; SA4-13.pdf
1N6103 – 1N6137A
1N6139 – 1N6173A
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N6103 thru 1N6137A
and 1N6139 thru 1N6173A
SCOTTSDALE DIVISION
Voidless-Hermetically-Sealed Bidirectional
Transient Suppressors
ELECTRICAL CHARACTERISTICS
INDUSTRY TYPE
NUMBER
(Note 4)
P
PP
Rating
500W
1500W
1N6103A 1N6139A
1N6104A 1N6140A
1N6105A 1N6141A
1N6106A 1N6142A
1N6107A 1N6143A
1N6108A 1N6144A
1N6109A 1N6145A
1N6110A 1N6146A
1N6111A 1N6147A
1N6112A 1N6148A
1N6113A 1N6149A
1N6114A 1N6150A
1N6115A 1N6151A
1N6116A 1N6152A
1N6117A 1N6153A
1N6118A 1N6154A
1N6119A 1N6155A
1N6120A 1N6156A
1N6121A 1N6157A
1N6122A 1N6158A
1N6123A 1N6159A
1N6124A 1N6160A
1N6125A 1N6161A
1N6126A 1N6162A
1N6127A 1N6163A
1N6128A 1N6164A
1N6129A 1N6165A
1N6130A 1N6166A
1N6131A 1N6167A
1N6132A 1N6168A
1N6133A 1N6169A
1N6134A 1N6170A
1N6135A 1N6171A
1N6136A 1N6172A
1N6137A 1N6173A
MINIMUM BREAKDOWN
VOLTAGE
V
(BR)
@ I
(BR)
Volts
7.13
7.79
8.65
9.50
10.45
11.40
12.35
14.25
15.20
17.10
19.0
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
71.3
77.9
86.5
95.0
104.5
114.0
123.5
142.5
152.0
171.0
190.0
mA
175
150
150
125
125
100
100
75
75
65
65
50
50
50
40
40
30
30
30
25
25
20
20
20
20
15
15
12
12
10
10
8
8
5
5
RATED
STANDOFF
VOLTAGE
V
WM
V
5.7
6.2
6.9
7.6
8.4
9.1
9.9
11.4
12.2
13.7
15.2
16.7
18.2
20.6
22.8
25.1
27.4
29.7
32.7
35.8
38.8
42.6
47.1
51.7
56.0
62.2
69.2
76.0
86.6
91.2
98.8
114.0
121.6
136.8
152.0
MAXIMUM
STANDBY
CURRENT
I
D
@ V
WM
500W
1500W
uA
uA
50
300
20
100
20
100
20
100
20
20
20
20
20
20
20
20
20
20
1
10
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
1
5
MAXIMUM
CLAMPING
VOLTAGE
V
C
@
I
PP
Volts
11.2
12.1
13.4
14.5
15.6
16.9
18.2
21.0
22.3
25.1
27.7
30.5
33.3
37.4
41.6
45.7
49.9
53.6
59.1
64.6
70.1
77.0
85.3
97.1
103.1
112.8
125.1
137.6
151.3
165.1
178.8
206.3
218.4
245.7
273.0
MAXIMUM
PEAK PULSE
CURRENT I
PP
500 W
Amps
44.6
41.3
37.3
34.5
32.0
29.6
27.5
23.8
22.4
19.9
18.0
16.4
15.0
13.4
12.0
10.9
10.0
9.3
8.5
7.7
7.1
6.5
5.9
5.1
4.8
4.4
4.0
3.6
3.3
3.0
2.8
2.4
2.3
2.0
1.8
1500 W
Amps
133.9
124.0
111.9
103.4
96.2
88.8
82.4
71.4
67.3
59.8
54.2
49.2
45.0
40.1
36.0
32.8
30.1
28.0
25.4
23.2
21.4
19.5
17.6
15.4
14.5
13.3
12.0
10.9
9.9
9.1
8.4
7.3
6.9
6.1
5.5
MAXIMUM
TEMP.
COEF. OF
V
(BR)
%/ C
.06
.06
.06
.07
.07
.07
.08
.08
.08
.085
.085
.085
.09
.09
.09
.095
.095
.095
.095
.095
.095
.095
.100
.100
.100
.100
.100
.100
.100
.100
.105
.105
.105
.110
.110
o
WWW .
Microsemi
.C
OM
Notes:
1.
2.
3.
4.
Note: 4
1
1
1
2
3
1
2
3
Applies to both 500 W and 1500 W series for devices shown (see note 4)
Applies only to 500 W series (1N6103 thru 1N6137A).
Applies only to 1500 W series (1N6139 thru 1N6173A).
Part number without the A suffix has 5% higher V
C
, 5% lower minimum V
(BR)
, and 5% lower I
PP
.
SYMBOLS & DEFINITIONS
Definition
1
1N6103 – 1N6137A
1N6139 – 1N6173A
Symbol
V
BR
V
WM
I
D
V
C
P
PP
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range.
This is also referred to as Standoff Voltage.
Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature.
Maximum clamping voltage at specified I
PP
(Peak Pulse Current) at the specified pulse conditions.
Peak Pulse Power: The peak power dissipation resulting from the peak impulse current I
PP
.
Copyright
©
2010
03-30-2010 REV F; SA4-13.pdf
Microsemi
Page 2
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
1N6103 thru 1N6137A
and 1N6139 thru 1N6173A
SCOTTSDALE DIVISION
Voidless-Hermetically-Sealed Bidirectional
Transient Suppressors
WWW .
Microsemi
.C
OM
MAXIMUM STEADY-STATE POWER IN WATTS
LEAD TEMPERATURE
LEAD TEMPERATURE
AMBIENT TEMPERATURE (
T
A
) in C
o
FIGURE 4
MAXIMUM POWER vs. LEAD TEMPERATURE
Maximum lead temperature in C (
T
L
) at point “L” from body
(for maximum operating junction temperature with equal two-lead conditions.)
o
FIGURE 5
STEADY-STATE DERATING CURVE
FOR FREE-AIR MOUNTING
(For PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled
where T
OP
or T
J(MAX)
rating is not exceeded)
PACKAGE DIMENSIONS Inches [mm]
PACKAGE E for 1N6103 thru 1N6137A (500 W)
Note: Package E lead dimension diameter is 0.030 inch nominal with –.004 +.003 inch tolerance
1N6103 – 1N6137A
1N6139 – 1N6173A
PACKAGE G for 1N6139 thru 1N6173A (1500 W)
Note: Package G lead dimension diameter is 0.040 inch nominal with –.004 +.002 inch tolerance
Copyright
©
2010
03-30-2010 REV F; SA4-13.pdf
Microsemi
Page 4
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
