Document 178-1
Shielded Power Inductors – DT1608C
The Coilcraft DT1608 Series is magnetically shielded
and the materials used provide natural heat sinking. This
allows these parts to be used at relatively high currents.
Even at 150% of rated current, the temperature rise is
less than 15°C.
Because of their “swinging” inductance vs current char-
acteristics, the DT1608 Series can be used as ultra high
L inductors at zero or low current.
For new designs, consider the LPS4018 as an alternative
to this series. The LPS4018 series is more cost effec-
tive, features a smaller footprint, lower profile and better
current handling. We will continue to manufacture and
support the DT1608C indefinitely.
Specifications
Part number
1
DT1608C-102ML_
DT1608C-152ML_
DT1608C-222ML_
DT1608C-332ML_
DT1608C-472ML_
DT1608C-682ML_
DT1608C-103ML_
DT1608C-153ML_
DT1608C-223ML_
DT1608C-333ML_
DT1608C-473ML_
DT1608C-683ML_
DT1608C-104ML_
DT1608C-154ML_
DT1608C-224ML_
DT1608C-334ML_
DT1608C-474ML_
DT1608C-684ML_
DT1608C-105ML_
Inductance
2
±20% (µH)
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
DCR max
(Ohms)
0.065
0.070
0.075
0.080
0.085
0.090
0.125
0.135
0.160
0.275
0.300
0.575
1.10
1.40
2.25
2.90
3.60
4.55
8.10
SRF typ
(MHz)
180
120
100
70
60
50
45
35
25
20
17
14
12
7.0
7.0
6.0
4.0
3.5
2.5
Inductance
rating
3
(µH)
0.60
0.80
0.90
1.5
2.0
3.0
5.0
6.0
10
12
20
30
40
60
90
100
150
200
400
Operating Parameters
Current
Energy
rating
4
storage max
(A)
(µJoules)
2.0
1.8
1.9
1.8
1.5
1.8
1.2
1.4
1.2
1.6
1.0
1.9
0.7
1.2
0.6
1.1
0.5
1.2
0.45
1.5
0.34
1.3
0.29
1.4
0.24
1.5
0.20
1.4
0.17
1.6
0.16
1.4
0.14
1.5
0.12
1.4
0.08
1.4
Switching
frequency
max
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
500 kHz
500 kHz
500 kHz
500 kHz
500 kHz
500 kHz
1. When ordering, please specify
termination
and
packaging
codes:
Termination: L
Packaging:
C
B
D
DT1608C-106MLC
= RoHS compliant gold over nickel over moly-manganese.
Special order:
T
= RoHS tin-silver-copper (95.5/4/0.5)
or
S
= non-RoHS tin-lead (63/37).
= 7″ machine-ready reel. EIA-481 embossed plastic
tape (750 parts per full reel).
= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
= 13″ machine-ready reel. EIA-481 embossed plastic
tape (2500 parts per full reel).
2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc.
3. Measured at the rated current. Refer to L vs Current curves for details.
4. Average maximum allowable current. DT Series inductors are designed
for current spikes as high as twice the current rating.
5.
Ambient temperature range:
–40°C to +85°C
6.
Storage temperature range:
Component: –40°C to +85°C
Tape and reel packaging: –45°C to +80°C
7.
Resistance to soldering heat:
Three reflows at >217°C for 90 seconds
(+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room
temperature between.
8. Electrical specifications at 25°C.
See Color Coding section for part marking information.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US
+1-847-639-6400 sales@coilcraft.com
UK
+44-1236-730595 sales@coilcraft-europe.com
Taiwan
+886-2-2264 3646 sales@coilcraft.com.tw
China
+86-21-6218 8074 sales@coilcraft.com.cn
Singapore
+ 65-6484 8412 sales@coilcraft.com.sg
Document 178-1
Revised 05/20/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 178-2
Shielded Power Inductors – DT1608C Series
Typical L vs Current
10000
0.160
dia
4,06
0.115max
2,92
0.260 max
6,60
0.070
1,78
0.050
1,27
0.090
2,29
0.170min
4,32
0.040
1,02
0.270
6,86
0.055
1,40
0.160
4,06
0.140
3,56
1000
-105
Inductance (µH)
100
-104
0.175max
4,45
10
-103
Recommended
Land Pattern
1
-102
Part Marking
Dash number
0.1
0.01
0.1
XXX
Current (A)
1
10
Isat Derating
+30
Weight:
Terminations:
136 – 157 mg
Gold over nickel over moly-manganese. Other terminations
available at additional cost.
Tape and reel:
750/7″ reel; 2500/13″ reel 12 mm tape width
For packaging data see Tape and Reel Specifications section.
Change in rated current (%)
+20
+10
0
-10
-20
-30
-40
-20
0
20
25°C
40
60
80
100
120 140
Ambient temperature (°C)
US
+1-847-639-6400 sales@coilcraft.com
UK
+44-1236-730595 sales@coilcraft-europe.com
Taiwan
+886-2-2264 3646 sales@coilcraft.com.tw
China
+86-21-6218 8074 sales@coilcraft.com.cn
Singapore
+ 65-6484 8412 sales@coilcraft.com.sg
Document 178-2
Revised 05/20/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
京公网安备 11010802033920号
EEWORLD
