– Advanced Sector Protection: offers Persistent Sector Protection and
Password Sector Protection
– Program Suspend & Resume: read other sectors before
programming operation is completed
– Erase Suspend & Resume: read/program other sectors before an
erase operation is completed
– Data# polling & toggle bits provide status
– CFI (Common Flash Interface) compliant: allows host system to
identify and accommodate multiple flash devices
– Unlock Bypass Program command reduces overall multiple-word
programming time
Enhanced VersatileI/O
™
Control
– All input levels (address, control, and DQ input levels) and outputs
are determined by voltage on V
IO
input. V
IO
range is 1.65 to V
CC
Compatibility with JEDEC standards
– Provides pinout and software compatibility for single-power supply
flash, and superior inadvertent write protection
100,000 erase cycles typical per sector
20-year data retention typical
Performance Characteristics
High performance
– 70 ns access time
– 8-word/16-byte page read buffer
– 25 ns page read time
Hardware features
– WP#/ACC input accelerates programming time (when high voltage
is applied) for greater throughput during system production. Protects
first or last sector regardless of sector protection settings on uniform
sector models
– Hardware reset input (RESET#) resets device
Publication Number
S29GL-N_01
Revision
03
Issue Date
March 15, 2007
This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.
Data
Sheet
(Advan ce
Infor m a tio n)
General Description
The S29GL-N family of devices are 3.0-Volt single-power Flash memory manufactured using 110 nm
MirrorBit technology. The S29GL064N is a 64-Mb device organized as 4,194,304 words or 8,388,608 bytes.
The S29GL032N is a 32-Mb device organized as 2,097,152 words or 4,194,304 bytes. Depending on the
model number, the devices have an 8-bit wide data bus only, 16-bit wide data bus only, or a 16-bit wide data
bus that can also function as an 8-bit wide data bus by using the BYTE# input. The devices can be
programmed either in the host system or in standard EPROM programmers.
Access times as fast as 70 ns are available. Note that each access time has a specific operating voltage
range (V
CC
) as specified in the
Product Selector Guide
and the
Ordering Information–S29GL032N,
and
Ordering Information–S29GL064N.
Package offerings include 48-pin TSOP, 56-pin TSOP, 48-ball fine-pitch
BGA and 64-ball Fortified BGA, depending on model number. Each device has separate chip enable (CE#),
write enable (WE#) and output enable (OE#) controls.
Each device requires only a
single 3.0-Volt power supply
for both read and write functions. In addition to a
V
CC
input, a high-voltage
accelerated program (ACC)
feature provides shorter programming times through
increased current on the WP#/ACC input. This feature is intended to facilitate factory throughput during
system production, but may also be used in the field if desired.
The device is entirely command set compatible with the
JEDEC single-power-supply Flash standard.
Commands are written to the device using standard microprocessor write timing. Write cycles also internally
latch addresses and data needed for the programming and erase operations.
The
sector erase architecture
allows memory sectors to be erased and reprogrammed without affecting the
data contents of other sectors. The device is fully erased when shipped from the factory.
The
Advanced Sector Protection
features several levels of sector protection, which can disable both the
program and erase operations in certain sectors. Persistent Sector Protection is a method that replaces the
previous 12-volt controlled protection method. Password Sector Protection is a highly sophisticated protection
method that requires a password before changes to certain sectors are permitted.
Device programming and erasure are initiated through command sequences. Once a program or erase
operation begins, the host system need only poll the DQ7 (Data# Polling) or DQ6 (toggle)
status bits
or
monitor the
Ready/Busy# (RY/BY#)
output to determine whether the operation is complete. To facilitate
programming, an
Unlock Bypass
mode reduces command sequence overhead by requiring only two write
cycles to program data instead of four.
Hardware data protection
measures include a low V
CC
detector that automatically inhibits write operations
during power transitions. The hardware sector protection feature disables both program and erase operations
in any combination of sectors of memory. This can be achieved in-system or via programming equipment.
The
Erase Suspend/Erase Resume
feature allows the host system to pause an erase operation in a given
sector to read or program any other sector and then complete the erase operation. The
Program Suspend/
Program Resume
feature enables the host system to pause a program operation in a given sector to read
any other sector and then complete the program operation.
The
hardware RESET# pin
terminates any operation in progress and resets the device, after which it is then
ready for a new operation. The RESET# pin may be tied to the system reset circuitry. A system reset would
thus also reset the device, enabling the host system to read boot-up firmware from the Flash memory device.
The device reduces power consumption in the
standby mode
when it detects specific voltage levels on CE#
and RESET#, or when addresses are stable for a specified period of time.
The
Write Protect (WP#)
feature protects the first or last sector by asserting a logic low on the WP#/ACC pin
or WP# pin, depending on model number. The protected sector is still protected even during accelerated
programming.
The
Secured Silicon Sector
provides a 128-word/256-byte area for code or data that can be permanently
protected. Once this sector is protected, no further changes within the sector can occur.
Spansion MirrorBit flash technology combines years of Flash memory manufacturing experience to produce
the highest levels of quality, reliability and cost effectiveness. The device electrically erases all bits within a
sector simultaneously via hot-hole assisted erase. The data is programmed using hot electron injection.
[align=left][font=verdana, Arial, Helvetica, sans-serif][size=4][color=#000000]Watchdog is a way for CPU to recover itself when software runs away. Watchdog can be divided into hard watchdog and soft ...
I used the project in controlSUIT to generate PWM waveforms. It compiled and ran successfully. The registers can also be modified, but why can't the PWM waveform be detected? Is it a problem with my t...
[size=4][color=#000000][backcolor=white]If you want to master Bluetooth hardware engineers, you are not a qualified hardware engineer if you don't understand the various interfaces on the Bluetooth mo...
A process is the smallest unit of resource allocation. Process: 1) PCB (Process Control Block) 2) Code segment 3) Data segment 4) Stack segment A program 1n 5 ways to terminate a process: 1) Call retu...
0 Preface
Aviation cables are the nervous system of aircraft, connecting the aircraft electrical, avionics, fire control, control and other systems, providing power supply, control signals and da...[Details]
Test
platform: MACHXO640
Programming language: Verilog
Random testing: Yes
Baud rate: 9600
Bit error rate: 1%oooooo
Goal: Implement a simple UART
on xo640
that can p...[Details]
This article describes how to port the STM8 standard library to the SDCC tool chain on EIDE and complete the test Take STM8S105K4T6 as an example, the other library processes are mostly the same 1...[Details]
Among the various power supplies commonly used in the past and present, switching power supplies are very popular and can generally meet any design requirements. This power supply is very economica...[Details]
On March 19, 2015, WPG Holdings, a leading electronic components distributor dedicated to the Asia-Pacific market, announced that its subsidiary Pinjia has launched a tire pressure monitoring sol...[Details]
A delta-sigma ADC is often the primary component of a 10-kilogram scale that can detect a 1-gram change in weight. When designers need to measure temperature to 0.01 degrees, delta-sigma ADCs are...[Details]
As shown in the figure, J1 is the No. 1 and No. 2 terminals of the instrument. VD3, C7, C9, etc. rectify and filter the AC voltage output by the low-voltage winding of transformer T1, and then outp...[Details]
Classification of power electronic devices
According to the control ability of the device, it is divided into the following three categories:
Semi-controlled devices: Thyri...[Details]
Huawei Consumer Business Group today officially released its new microkernel-based, all-scenario distributed operating system, Hongmeng OS, to the world at its Global Developers Conference. As Huaw...[Details]
2019 is undoubtedly a year of reform and self-help for the color TV market. In the cold winter of color TV, the biggest highlight in 2019 is Huawei's launch of smart screens to change the color TV ma...[Details]
Program requirements: At the beginning, the LED displays 0, K1 has the function of increasing numbers, and K2 has the function of decreasing numbers. If the LED displays 0, press K1, it will display ...[Details]
Electrolytic capacitors will leak over time. The circuit shown in the attached figure allows you to test the leakage of capacitors and decide whether they are worth using. The leakage can be suppress...[Details]
With the development of the times, electronic products are becoming more and more popular. They are no longer rare items but commodities that everyone can afford. Many electronic products are life ...[Details]
If the iPhone, PlayStation 5, or new car you ordered has been delayed in the past two years, blame it on the global chip shortage. The problem began last year when the COVID-19 pandemic, factory c...[Details]
O Introduction
At present, switching converters with power factor correction function are usually divided into two types: two-stage structure and single-stage structure. The two-stage stru...[Details]
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
