SERIES
Metallized Polyester
Metallized Polyester Film Switching Power Supply Capacitors
For applications requiring high current carrying
temperatures with high DV/DT and peak current
capability
at elevated
5ME
FEATURES
-
High Current Carrying
Capability
-
High Operating Temperature
-
Low ESR and ESL
-
Compact Con guration
-
Five Termination Styles
STANDARD CONFIGURATION
-
5ME22 /axial lead termination
-
5ME26 /tab terminations low pro le
-
5ME27 /tab terminations high pro le
-
5ME28 /internal coaxial leads
-
5ME29 /internal coaxial leads with
grounded copper shielding
Rev. 2
Speci cation Summary
Capacitance Range
1.0 to 200.0 microfarads. Capacitance is measured at 25°C
at/or referenced to a frequency of 1kHz.
Capacitance Tolerance
M=±20%, K=±10%, J=±5%
Temperature Range
Operating: -40°C to +85°C Storage: -55°C to +85°C
Enclosure/ Construction
Mylar tape outerwrap with specially formulated, conductive
epoxy end ll to maximize heat exchange. Extended
metallized polyester lm.
Voltage Rating
DC working voltage ratings are from 30 to 400VDC.
Process and inspection data are maintained on le and available
on special request.
Environmental
Parameter
Vibration
Immersion
Shock
Humidity
Thermal Shock
Life
Method
204
104
213
106
107
108
Condition
D
B
I
-
A
F
Quality Control
Capacitors are tested 100% for:
° Capacitance tolerance
° Dissipation Factor
° Dielectric withstanding voltage
° Insulation Resistance
° Equivalent Series Resistance (ESR)
Reference MIL-STD-202
Characteristics
Insulation Resistance
Temperature(°C)
25
Megaohmsx
20,000
Microfarads
Capacitance Change
Temperature(°C)
-40
PercentageChange
-3.0
(typical)
85
+3.0
Insulation Resistance
CapacitanceChange
Dissipation Factor
Will not exceed 1.0% when measured at 25°C: at 1kHz for
capacitance ≤ 20 microfarads; at 120 Hz for capacitance
>microfarads.
Dielectric Strength
Capacitors withstand a DC potential of 150% rated
voltage applied between the terminals for two (2)
minutes without permanent breakdown. Test voltage is
applied and discharged through one ohm per volt
minimum, and at 25°C.
Rev. 2