Low-power embedded motherboard, X86 architecture, wide application range, strong software versatility, complete functions, easy to use, small size (96*90), convenient for your development. Professiona...
Welcome to discuss. The Internet of Things (IoT) is a network that connects all ordinary objects that can perform independent functions, such as the Internet and traditional telecommunications network...
It is now possible to connect low-power nodes to the Internet using a variety of wireless technologies.Among all wireless technologies, using the Sub-1 GHz band for communication can achieve the longe...
Hello everyone, I am a student, and I want to design a board with OMAPL138 as the core. But the information I have is quite mixed, and there is little useful information, so I want to ask if you have ...
To reply to the previous post, why the built-in symbol icon cannot be used, just select one of these four in menuconfig, the only difference is the size of the icon. In this way, you can select the WI...
Because the IO of the microcontroller is 5V, and the sensor signal is 24V, I hope that the sensor can cut off the signal of the optocoupler while the IO controls the optocoupler. Because the IO of the...
introduction
ABS is an essential safety electronic device in today's cars, and its function is increasingly valued by people. The ABS system uses solenoid valves and oil re...[Details]
After the extreme suppression from the United States, Huawei HiSilicon's advanced process chips have nowhere to be outsourced, and the latest 5nm Kirin 9000 processor is out of print.
But obvi...[Details]
Today I am using the AD function of the stm8s microcontroller. There are ten channels from AN0 to AN9 on the microcontroller. I want to use only three of them, AN5 to AN7. //ADC initialization voi...[Details]
Enhancing haptic feedback for Chinese health devices with TacHammer DRAKE LF low-frequency motors for wearables, sleep aids, meditation tools, and heart rate regulation devices
Sep...[Details]
In this article we will examine the issues involved in selecting and using a high-precision
digital-to-analog converter
. The architecture of the DAC affects the DAC's specifications and th...[Details]
Although electric vehicle (EV) and hybrid electric vehicle (HEV) technology is still in an evolutionary stage of development, concerns about the long-term supply of hydrocarbon fuels and environmen...[Details]
Fingerprint recognition has become a standard feature of smart door locks due to its simplicity and convenience. In the conventional smart door lock solution architecture, fingerprint recognition and...[Details]
challenge:
Develop a reliable, fully automated and cost-effective test system
for
Blu-ray player
products to reduce quality inspection time.
Solution:
Using NI LabV...[Details]
Samsung Electronics plans to build AI capabilities into its home appliances starting next year, Businesses Korea reported on June 18. Following the launch of its first AI smartphone, the Galaxy S24...[Details]
Traditional millimeter wave radar is also called 3D millimeter wave radar, which has three dimensions of information, namely distance, speed, and azimuth. On this basis, 4D millimeter wave radar ad...[Details]
Ambiq Micro said that the Apollo3 Blue wireless SoC with the Arm Cortex-M4F core it launched recently achieved a power consumption level of 6μA/MHz, using TSMC's 40nm ultra-low power (40ULP) process....[Details]
At the "2024 China Automotive Chongqing Forum", Li Xiang, founder of Ideal Auto, revealed to the participants the major breakthroughs in autonomous driving technology achieved by the Ideal Auto tea...[Details]
With the increasing demand for intelligent vehicle assisted driving systems and the development of automotive electronic systems, new reversing radars should be able to continuously measure and disp...[Details]
Up to now, more than 180 models have been tested based on the CC-1000T intelligent cockpit evaluation system of Cheyun Research, of which more than 79% have the ability to upgrade via OTA, and more...[Details]