The amount of data carried by any sensor network will increase as the complexity of the network devices increases. Low-end devices can only transmit data in 1-bit increments, indicating simple on and ...
Digital systems in modern factories are becoming increasingly complex, with interconnections between devices and software from many different vendors. This complexity has led to the abandonment of pro...
1 IntroductionA typical GPS receiver consists of four parts: antenna, RF front end, correlator and navigation solution. Among them, the antenna is mainly responsible for signal reception; the RF front...
Glass rotor flowmeter is an instantaneous flow measurement instrument that is simple to use, easy to read, and widely used. It is extremely important to choose and use this instrument well. Regarding ...
[size=3] There is a DAC output experiment in the official routine. This experiment uses the DAC output (PA4) function of the MM32F103 development board to drive the D2 light-emitting LED to simulate t...
#include "io430.h"/*There are two ways to control the on and off of the LED light.Method 1: interrupt function. Method 2: use if(P4INBIT2) to judge.When writing code, try to follow the steps to avoid ...