1.printf function
This is very simple. Just redirect the printf function.
This is the STM8L microcontroller code. Note: If it is an IAR compiler, you need to enable library-FULL
It can be used on msp4...
The program mainly implements a relatively general initialization procedure, the content is as follows: char ADC12Init(char n,char channels[],char rep) { if(n>15) return 0; //SHT0_0 ADC12CTL0 = ADC12O...
I tried 52840 on the weekend, and found that it was beaten by n companies :Cry: I am still too green. I saw on the forum that 52840 can be downloaded with mdk before. I thought that I had installed md...
The microcontroller application system consists of hardware and software. The carrier of the software is the program memory of the hardware. The program memory uses a read-only memory. This memory can...
Host power management settings: When installing the system, many users often set time limits for the display, hard disk and power supply in the host power management settings in order to achieve the ...
CircuitPython is being ported to the NXP i.MX RT, which is powerful with 500+ MHz and up to 1 MB RAM. Ports are currently being made to: RT1011 + ESP32 and RT1062, with more (including LCD interface) ...