C1608Y5V104ZETS datasheet, PDF

Datasheet> All Categories > Passive components> capacitor> C1608Y5V104ZETS

C1608Y5V104ZETS: DescriptionCeramic Capacitor, Multilayer, Ceramic, 16V, 80% +Tol, 20% -Tol, Y5V, -82/+22% TC, 0.1uF, Surface Mount, 0603, CHIP, GREEN; CategoryPassive components capacitor; File Size214KB，6 Pages; ManufacturerDARFON; Websitehttp://www.darfon.com.cn/; Environmental Compliance; Darfon Electronics is the world's top two LCD TV backlight module inverter and notebook keyboard manufacturers. Darfon Electronics was founded in 1997. Adhering to the corporate culture of "being down-to-earth, pursuing excellence, and caring for society" and positioning itself as an "expert in optoelectronics and precision components", it focuses on the research and development of peripheral components, power components, and integrated components, as well as product services.

Download Datasheet Parametric View All

C1608Y5V104ZETS Overview

Ceramic Capacitor, Multilayer, Ceramic, 16V, 80% +Tol, 20% -Tol, Y5V, -82/+22% TC, 0.1uF, Surface Mount, 0603, CHIP, GREEN

C1608Y5V104ZETS Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	DARFON
package instruction	, 0603
Reach Compliance Code	compliant
ECCN code	EAR99
capacitance	0.1 µF
Capacitor type	CERAMIC CAPACITOR
dielectric materials	CERAMIC
high	0.8 mm
JESD-609 code	e3
length	1.6 mm
Installation features	SURFACE MOUNT
multi-layer	Yes
negative tolerance	20%
Number of terminals	2
Maximum operating temperature	85 °C
Minimum operating temperature	-30 °C
Package shape	RECTANGULAR PACKAGE
Package form	SMT
method of packing	TR, PAPER, 7 INCH
positive tolerance	80%
Rated (DC) voltage (URdc)	16 V
size code	0603
surface mount	YES
Temperature characteristic code	Y5V
Temperature Coefficient	-82/+22% ppm/°C
Terminal surface	Matte Tin (Sn) - with Nickel (Ni) barrier
Terminal shape	WRAPAROUND
width	0.8 mm

C1608Y5V104ZETS Preview

Electronics Corp.

Multi-Layer Ceramic Capacitor

C-S3-5-00

Y5V Dielectrics

Features

A monolithic structure ensures high reliability and mechanical strength.

High capacitance density.

A wide range of capacitance values in standard case size.

Suitable for high speed SMT placement on PCBs.

Ni barrier termination highly resistance to migration.

Lead-free termination is in compliance with the requirement of green plan and ROHS.

Applications

General electronic equipment.

Communication equipment.

Custom Application

Y5V Dielectric Characteristics

Capacitance Range

Size (mm)

(EIA inch)

Test Voltage

Test Frequency

Capacitance Tolerance

Operating Temperature Range

Maximum Capacitance Change

Rated Voltage

Dissipation Factor (DF)

Insulation Resistance (+25℃, RVDC)

Insulation Resistance (+85℃, RVDC)

10nF to 100uF

0603

1005

1608

2012

3216

3225

(0201) (0402)

(0603) (0805) (1206) (1210)

1.0 ± 0.2Vrms (0.5±0.1Vrms for cap>10uF)

1.0 ± 0.2KHz (120Hz±10% for cap>10uF)

-20% to +80% (± 20% available on request)

-30℃ to +85℃

-82% to + 22%

4, 6.3, 10, 16, 25 & 50 VDC

Pls refer to DF table on page No. 6

10,000 MΩ min. or 500

Ω-F

min., whichever is smaller

1,000 MΩ min. or 50

Ω-F

min., whichever is smaller

Darfon Product Specification

Rev.: 4

Electronics Corp.

Multi-Layer Ceramic Capacitor

Product Range and Thickness

CLASS

Class II

TYPE

Standard

T.C.

Y5V

SIZE

0603

1005

1608

2012

(EIA)

0201

0402

0603

0805

4V 6.3V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 6.3V 10V 16V

10 n

12 n

15 n

18 n

22 n

27 n

33 n

39 n

47 n

56 n

68 n

82 n

100 n A

120 n

150 n

180 n

220 n

270 n

330 n

390 n

470 n

560 n

680 n

820 n

1.0 u

1.2 u

1.5 u

1.8 u

2.2 u

2.7 u

3.3 u

3.9 u

4.7 u

G E G

5.6 u

6.8 u

8.2 u

10 u

12 u

15 u

18 u

22 u

47 u

100 u

E G E G

C-S3-5-00

3216

3225

1206

1210

25V 50V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V

C C E

E G E

E G

E G E G

E G

E G G

G L

G L G L

Non-standard capacitance or thickness is available on request

The thickness might be changed due to technology improvement.

Typical Tolerance

Thickness (mm)

Code

Class

0.30+/-0.03

0.50+/-0.05

0.60+/-0.15

Thickness (mm)

Code

Class

0.70+/-0.15

0.80+/-0.10

0.85+/-0.15

Thickness (mm)

Code

Class

0.95+/-0.15

1.15+/-0.20

1.25+/-0.20

Thickness (mm)

Code

Class

1.50+/-0.20

2.50+/-0.20

1.60+/-0.20

Thickness (mm)

Code

Class

2.00+/-0.20

3.20+/-0.20

Special Tolerance

Thickness (mm)

Code

Class

1.25 -0.20/+0.30

Thickness (mm)

Code

Class

1.60 -0.20/+0.30

Thickness (mm)

Code

Class

2.00+/-0.30

Thickness (mm)

Code

Class

2.50+/-0.30

Thickness (mm)

Code

Class

3.20+/-0.30

For Cap≥1µF, Tolerance of dimensions will be enlarged

Darfon Product Specification

Rev.: 4

Electronics Corp.

Multi-Layer Ceramic Capacitor

Taping Amount

Thickness

Code

Spec

0.30+/-0.03

0.50+/-0.05

0.60+/-0.15

0.80+/-0.10

0.80+0.15/ -0.10

0.85+/-0.15

0.95+/-0.15

1.15+/-0.20

Size(EIA)

0603 (0201)

1005 (0402)

2012 (0805)

3216 (1206)

1608 (0603)

2012 (0805)

3216 (1206)

3225 (1210)

4532 (1812)

2012 (0805)

3216(1206)

3216 (1206)

4520 (1808)

2012 (0805)

3216 (1206)

3225 (1210)

4520 (1808)

4532 (1812)

2012 (0805)

3216 (1206)

3225(1210)

3225 (1210)

4520 (1808)

4532 (1812)

3216 (1206)

3225 (1210)

4520 (1808)

4532 (1812)

3216 (1206)

3225 (1210)

4520 (1808)

4532 (1812)

3216 (1206)

3225 (1210)

4520 (1808)

4532 (1812)

3225 (1210)

Amount per reel

180 mm (7”)

Paper

15K

10K

Embossed

250 mm (10”)

Paper

Embossed

330 mm (13”)

Paper

50K

15K

10K

Embossed

C-S3-5-00

10K

2K/3K

500pcs/1K

500pcs

10K

1.25 +/-0.20

1.25+0.3/-0.2

1.50+/-0.20

10K

1.60+/-0.20

1.60+0.30/-0.20

2.00+/-0.20

2.00+/-0.30

2.50+/-0.20

2.50+/-0.30

3.20+/-0.20

3.20+/-0.30

*: For some products, the thickness spec can be 0.8+0.15/-0.1mm.

Darfon Product Specification

Rev.: 4

Electronics Corp.

Multi-Layer Ceramic Capacitor

Y5V Specifications

No.

Item

Specification

1 Operating Temperature Range

-30℃ to 85℃

Rated Voltage

4V,6.3VDC, 10VDC, 16VDC, 25VDC &

50VDC

No defects or abnormalities.

Within the specified dimension.

No defects or abnormalities.

Test Method

The rated voltage is defined as the maximum

voltage, which may be applied continuously to the

capacitor.

Visual inspection

Using calipers

No failure shall be observed when 250% of the

rated voltage is applied between the terminations

for 1 to 5 seconds, the charge and discharge

current is less than 50mA.

The insulation resistance shall be measured with a

DC voltage not exceeding the rated voltage at 25℃

and 75%RH max, and within 1 minute of charging.

C-S3-5-00

Appearance

Dimensions

Dielectric Strength (Flash)

Insulation Resistance ( I.R.)

Rated Voltage: <500V

To apply rated I.R.

≧10G

voltage.

≧500Ω-F

smaller)

Rated Voltage:

≧500V

To apply 500V. (whichever is

Capacitance

Dissipation Factor ( D.F.)

Within the specified tolerance at 1,000 hours The capacitance/D.F. shall be measured at 25℃ at

frequency 1.0±0.2KHz and voltage 1.0±0.2Vrms.

See Y5V DF table on page 6.

*For cap>10uF, measuring frequency 120±10% Hz

and voltage 0.5±0.1Vrms.

Capacitance change within the specified

tolerance –82% to +22%.

Reference temperature 25℃.

The ranges of capacitance change compared with

25℃ value over the temperature ranges should be

within the specified ranges.

Apply a parallel force of 5N to a PCB mounted

sample for 10±1sec.

Solder the capacitor to the test jig (glass epoxy

boards) shown in Fig. a. using a eutectic solder

then let sit for 48±4 hours. Then apply a force in the

direction shown in Fig. b. The soldering shall be

done with the reflow method and shall be

conducted with care so that the soldering is uniform

and free of defects such as heat shock.

20 50 Pressurizing speed : 1.0mm/sec.

Size

100

t :1.6mm

1005

1608

2012

3216

3225

0.4

1.0

1.2

2.2

1.5

3.0

4.0

5.0

0.5

1.2

1.65

2.0

2.9

Capacitance Meter

Capacitance Temperature

Characteristics

10 Termination Strength

No removal of the terminations or marking

defect.

11 Deflection (Bending Strength)

Appearance: No cracking or marking

defects.

Capacitance change within ±20%.

(Unit in mm)

4.5

R230

Pressurize

Flexure : 1mm

Fig. a.

Fig. b.

12 Solderability of Termination

90% of the terminations is to be soldered

evenly and continuously.

13 Resistance to Appearance

Soldering Heat Cap. Change

D.F.

I.R.

No marking defects

Within ±20%

To satisfy the specified initial value

I.R.≧10,000MΩ or R

≧500Ω-F.

( whichever is smaller)

Immerse the test capacitor into a methanol solution

containing rosin for 3 to 5 seconds, preheat it 150

to 180℃ for 2 to 3 minutes and immerse it into

molten solder of 230 ± 5℃ for 5±1seconds.

Preheat the capacitor at 120 to 150℃* for 1 minute.

Immerse the capacitor in an eutectic solder solution

at 270±5℃ for 10±1 seconds. Let sit at room

temperature for 48±4 hours, then measure.

* Preheat 150 to 200℃ for size≧3216.

Initial measurement : perform a heat treatment at

150+0/-10℃ for one hour and then let sit for 48±4

hours at room temperature. Perform the initial

measurement.

Darfon Product Specification

Rev.: 4

Electronics Corp.

Multi-Layer Ceramic Capacitor

Continued from previous page.

14 Temperature

Cycle

(Thermal

Shock)

Appearance

Cap. Change

D.F.

I.R.

No marking defects

Within ±20%

To satisfy the specified initial value

More than 10,000MΩ or R

＞500Ω-F

( whichever is smaller )

Solder the capacitor to supporting jig (glass epoxy

board) and perform the five cycles according to the

four heat treatments listed in the following table. Let

sit for 48±4hrs at room temperature, then measure.

Step 1: Minimum operating temperature

Step 2: Room temperature

Step 3: Maximum operating temperature

Step 4: Room temperature

30±3min

2~3 min

30±3min

2~3min

C-S3-5-00

15 Humidity Load Appearance

Cap. Change

D.F.

I.R.

Dielectric

Strength

16 High

Temperature

Load

(Life Test)

Appearance

Cap. Change

D.F.

I.R.

No marking defects

Within ±30%

150% max. of initial value

More than 500MΩ or R

≧25Ω-F.

(whichever is smaller)

No failure

Initial measurement : perform a heat treatment at

150+0/-10℃ for one hour and then let sit for 48±4

hours at room temperature. Perform the initial

measurement.

Apply the rated voltage at 40±2℃ and 90 to 95%

humidity for 500±12 hours. Remove and let sit for

48±4 hours at room temperature, then measure.

The charge/discharge current is less than 50mA.

Pre-treatment: Apply the rated DC voltage for 1 hr

at 40±2℃ and 90 to 95% humidity. Remove and let

sit for 48±4 hours, then perform the initial

measurement.

Apply *200% of the rated voltage for 500±12 hours

No marking defects

at the maximum operating temperature ± 3℃. Let

Within ±30%

sit for 48±4 hours at room temperature, then

150% max. of initial value

measure. The charge/discharge current is less than

More than 1 GΩ or R

≧50Ω-F.

(whichever 50mA.

is smaller)

Pre-treatment: Apply 200% of the rated voltage for

1 hr at maximum operating temperature ±3℃.

Remove and let sit for 48±4 hours, then perform the

initial measurement.

*some of the parts are applicable in rated voltage

*1.5. please refer to table 1

Darfon Product Specification

Rev.: 4

More (Only the first 5 pages are displayed. Please Download Datasheet to view the full content.) >

Recommended Resources

Bidirectional thyristor quick test circuit diagram

Control circuit diagram of car air conditioner

Solid State Battery Voltage Indicator Circuit

Special circuit for car flasher

Computer motherboard circuit diagram 440GX_11

Computer motherboard circuit diagram 830_11

[AD21] When exporting BOM from AD, the values are different. Why are they not separated?: As shown in the figure below, when I import the BOM, there are obviously many components with different values. Why are they not distinguished? If I want to separate them, how should I do it? Please h...; 我本将心向明月 PCB Design

msp430f5529 capture plus serial port source code: msp430f5529 capture plus serial port, which can be used for everyone to learn the microcontroller source program is as follows: #include "msp430f5529.h" #define uint unsigned int #define uchar unsigne...; Aguilera Microcontroller MCU

#idlemarket#Multiple board replacements (stm32, 51, NRF51822): [i=s]This post was last edited by freeelectron on 2019-10-14 17:15[/i]You can replace it with sensors, NBIOT, WIFI development boards, etc. If you like it, please contact us. The above are all officia...; freeelectron Buy&Sell

Use the C language library setjmp/longjmp function for exception recovery: A long time ago, when I was still using Turbo C 2.0 to write programs, I saw setjmp() and longjmp() functions when browsing library functions in the help function, but I never understood what they wer...; cruelfox MCU

Optimized spacer electric field analysis port 1 to 2 after learning: [i=s]This post was last edited by btty038 on 2021-7-28 22:06[/i]...; btty038 RF/Wirelessly

More than 5 million new mobile phones have been infected with Trojan viruses, most of which are "old people's phones"!: Have you ever bought a cell phone for your family? Yesterday, a colleague recommended a piece of news like this, and I was shocked after reading it!Some people on the Internet specialize in collecting...; eric_wang Talking

Popular Components