The Ortel PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of
PONA 2100 series EDFAs is designed to meet the most demanding
noise performance requirements of CATV applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 2100 series EDFAs provide optical isolation on
the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for
monitoring and control. The input optical signal is amplified with
active gain control for a constant output power level, or with active
output power control for constant gain mode.
The PONA 2100
series EDFAs also provide monitors and associated alarms for all
vital characteristics. The optical output of the PONA 2100 series
EDFAs can be split into multiple ports by an optional external
splitter.
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Optical / Electrical Characteristics
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Output Power
Noise Figure
(Note 2)
Pin
(dBm)
Pin
(dBm)
Po(dBm)
NF (dB)
NF (dB)
NF (dB)
Static Gain Flatness
Dynamic Gain Flatness
(Note 4)
GF (dB)
(dB)
(dB)
(dB)
Output Power Stability
Power Consumption
(steady state regime)
Notes
:
1.
2.
3.
4.
5.
(dB)
Psys(W)
Typ/Max
Typ/Max
Typ/Max
Max
Max
Max
Max
Max
Max
Max
Min
12
-10
14
+/-.25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.0
+/-0.5
+/-0.5
+/- 0.1
5
12
-10
17
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.25
+/-0.5
+/-0.5
+/- 0.1
7
12
-10
20
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.5
+/-1.0
+/-1.0
+/- 0.1
9
12
-10
22
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
12
12
-10
24
+/- .25
5.0/5.5
4.5/5.0
4.5/5.0
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
20
12
-10
26
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
27
12
-10
27
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
32
Nominal
-00 and -01 versions
-02 version
-03 version
(Note 3)
-00 and -02 versions
-01 version
-03 version
(Note 5)
50 C Case
o
UNIT
LIMIT
2114
2117
PONA MODELS
2120
2122
2124
2126
2127
COMMENTS
(note 1)
Unless stated otherwise all specifications apply over the full temperature range and humidity
Measured with 8 evenly spread signals @ 25°C,
Σ
Pin = 0 dBm.
Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1545 nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C; Gain
Flattened Option with
∆G
= +/-0.5dB is available for some Models
Stability over polarization and temperature
General and Mechanical Specifications
PROPERTY
GENERAL
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
Optical Connectors
Dimensions In Inches
REQUIREMENT
1530 ~ 1562nm
0°C to 50°C
-40°C to 85°C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Non-condensing
Standard
Optional
User Specified
19’’ Rack Mounted, 1U
Standard
COMMENTS
Ortel, a division of EMCORE
2 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Outline Drawing
AC and DC versions shown below with 8-port option
DC Version
AC Version
Ortel, a division of EMCORE
3 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001)
Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic
Compatibility for equipment.
EN 55013
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
EN 60825-1
EN 60825-2
CDRH
Mains Conducted Emissions
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
Ordering Information
PONA21
-
-
-
-
Optical
Output
Power
14
- 14 dBm
17
- 17 dBm
20
- 20 dBm
22
- 22 dBm
24
- 24 dBm
26
- 26 dBm
27
- 27 dBm
Output
Ports
1
2
4
8
Input Voltage
AC
– 90-260V 50/60 Hz
DC
– - 48 V
SC
FC
EC
TC
GC
Connector
-
-
-
-
-
SC/APC
FC/APC
E2000/APC
SC/UPC
FC/UPC
GFF/ NF options
00 - Standard
01 - Standard with Gain Flattened option
02 - Standard with Low NF option
03 - Low NF and Gain Flattened
Note: The maximum number of output ports when using E2000 connectors is four. All other optical connectors allow for
the eight ports option
Example:
PONA2120-2-AC-SC-00:
Standard 20 dBm EDFA with AC Power Supply, two (2) optical outputs, and SC/APC optical connectors
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
@DDZZ669i.MX6ULL Embedded Linux Development 1-Preliminary Study on Uboot Transplantation
i.MX6ULL Embedded Linux Development 2-uboot Porting Practice
i.MX6ULL Embedded Linux Development 3-Kernel Porti...
Make a four-layer board with 2oz. Because the board shape is fixed, U, V, W and the center line are each one layer.
The narrowest line width is 6.8mm. Due to heat dissipation issues, the four layers a...
High-voltage circuit designs require isolation to protect operators, communicate with low-voltage circuits, and eliminate unwanted noise within the system. Digital isolators provide a simple and relia...
[i=s]This post was last edited by qq825117996 on 2020-9-3 11:10[/i]cube automatically generates initialization function
void MX_TIM15_Init(void)
{LL_TIM_InitTypeDef TIM_InitStruct = {0};LL_TIM_OC_Init...
[i=s]This post was last edited by Mengli on 2020-4-14 21:55[/i]I am a novice and this is my first time writing a review. If there are any mistakes in the writing process, I hope you can point them out...
Nordic Semiconductor today announced three new PMICs that offer new chip-scale packaging (CSP) options and support higher battery terminal voltages. Power management ICs (PMICs) are a critical part...[Details]
Keil is the first choice for electronic engineers because it currently covers both C51 and STM32 development platforms. 51 MCU is an 8-bit MCU (AT89C51, STC89C51 and AT89S51), AVR Atmega is also an...[Details]
On July 11, Tesla CEO Elon Musk recently confirmed that the upcoming FSD V12.5.x version will unify the autonomous driving software stack and is suitable for driving on highways and urban roads.
...[Details]
As the pace of development of new energy vehicles accelerates, the corresponding level of automotive intelligence is also constantly improving. In addition to continuously improving human-computer in...[Details]
The simulation schematic diagram of the temperature measurement system with pt100 thermistor + AD824S amplification and ATmega8 microcontroller control is as follows. The source program of ATmega8 ...[Details]
The current carrying value
of the conductor
is directly related to the number of vias and pads of the conductor (currently, there is no calculation formula for the influence of pads and vias pe...[Details]
Proteus simulation of DS1302 + 8-bit digital tube display test. The simulation effect is as follows: The source program is as follows: /* 51 single-chip microcomputer: DS1302 + digital tube Prote...[Details]
In recent years, with the development of domestic air separation equipment towards large-scale, in order to meet the needs of large and medium-sized air separation production management and quality ma...[Details]
Today, a piece of news about a Tesla
robot
attacking an engineer went viral online, causing a stir in public opinion.
The popularity of the related topic not only topped Baidu's hot se...[Details]
The following is a decoding program for the infrared remote control that comes with the 51 experiment board. It can read out the key value of each button on the infrared remote control and display it...[Details]
STMicroelectronics Launches Third Generation Silicon Carbide Products to Drive Future Development of Electric Vehicles and Industrial Applications
STMicroelectronics' latest generati...[Details]
External power socket cleverly converted into charging socket
Some pocket semiconductor radios and pocket radio recorders are equipped with external power sockets, as shown in Figu...[Details]
Celsius (Fahrenheit) temperature frequency converter when the temperature range is offset
AD537 has a linear temperature compensation characteristic, so it can be used to complete the temperatur...[Details]
A conversation with Mike Pienovi, general manager of TI Sitara™︎ MCU: Products that make real-time processing simple and affordable As the demand for real-time control, intelligence and communicati...[Details]
To use a certain type of LCD on an ARM board, you often have to modify the LCD driver or device tree, which is very inconvenient.
In ARM40-A5, we store the configuration instructions of common...[Details]
ARM Technology
京公网安备 11010802033920号
EEWORLD
