V-Basic Standard V15 Series
Electromechanical Basic Switch
DESCRIPTION
Honeywell’s V-Basic Standard V15 series is an
electromechanical switch designed for enhanced reliability at a
great value. This switch is often ideal for “low-cost-of-failure” –
where the cost to replace the switch or to service any failure
related to the switch is minimal. The V15 is designed for
applications requiring
≥
100 g of operating force and electrical
ratings ranging from 16A to 22A.
FEATURES
•
•
•
•
•
•
Broad range of electrical loads
Straight, roller, simulated roller, and special actuators
Special terminations available upon request
Precision operation and application versatility
Wide temperature range
Global approvals (ENEC, CQC, UL, cUL)
•
•
•
•
•
POTENTIAL APPLICATIONS
Appliance
Gaming
Vending machines
Water heaters
Industrial controls
The V15 Series switch offers a wide range of standard
offerings, including a choice of actuators, electrical ratings,
operating forces, and circuitry, and holds global approvals
(ENEC, CQC, UL, cUL).
BENEFITS
•
Compatible with many applications due to the switches
design flexibility, broad range of electrical loads, and
actuators
•
•
Accepts insulated connections, most quick connect
openings
Reliability, repeatability within range of conditions
V-Basic Standard V15 Series
Specifications
Insulation resistance
Dielectric strength
Contact resistance
Operating frequency - electrical
Operating frequency – mechanical
Operating speed
Service life mechanical
Service life electrical
Storage temperature
Storage humidity
Micro disconnection (μ)
Agency approvals
ELECTRICAL CHARACTERISTICS
Electrical rating
16
22
≥ 100 mOhm (500 Vdc)
1000 Vac (50 Hz/60 Hz, 1 min.)
100 milliOhm max.
10 to 30 operations per minute
300 operations per minute max.
0,1mm - 1m/sec.
5 million cycles (operating force < 200 g); 1 million cycles (operating force > 200 g)
6000 or 50000 operations minimum
-25 °C to 100 °C [-13 °F to 212 °F]
85 % RH max.
< 3 mm contact gap
ENEC, CQC, UL, cUL
ENEC/CQC ; 16(4) A, 250 Vac (50000 cycles)
UL/cUL ; 16½ HP, 125 Vac/250 Vac (6000 cycles)
ENEC/CQC: 22(8 )A, 250 Vac (10000 cycles)
UL/cUL: 22 A 1HP, 125 Vac/250Vac (6000 cycles)
DIMENSIONS
MOUNTING HOLE DIMENSIONS
Metric mounting for Ø3 mm pins or screws
USA mounting for #4 screws
2
www.honeywell.com/sensing
Electromechanical Basic Switches
CONNECTION DIMENSIONS
C-style quick connect - 6,35 mm wide x 0,8 mm thick
D-style quick connect - 4,80 mm wide x 0,8 mm thick
E- style quick connect - 4,80 mm wide x 0,5 mm thick
Honeywell Sensing and Control
3
V-Basic Standard V15 Series
STANDARD LEVER OPTIONS
Lever code/Description
Outline dimensions
A01/Straight short lever
A02/Standard straight lever
A03/Long straight lever
A04/Simulated roller lever
A05/Short roller lever
A06/Roller lever
4
www.honeywell.com/sensing
Electromechanical Basic Switches
NOMENCLATURE TREE
V15
T
Temperature
grade
16
Electrical
rating
C
Z
200
A
01
XX
K
Switch type
Terminal style
Circuit
code
Operating force
at pin plunger, max.
Lever position
Lever type
Special designator
Mounting holes
T
T125
V15 Series
switch
ENEC/CQC:
16(4) A, 250 Vac
16 UL/cUL:
16½ HP
125 Vac/250 Vac
C
Quick connect
6,30 mm x 0,80 mm
[0.250 in x 0.032 in]
Z
SPDT
100
100 gf
0.98 N
No lever
pin plunger
No lever
pin plunger
A special designator
letter is used only
when terminal type is
"X" or actuator/lever
type is "99" to specify
that the terminals or
the actuator of the
switch is special.
Review product
specification to
determine the exact
differences.
Metric
Ø3.1 mm
H
T150
ENEC/CQC:
22(8 )A, 250 Vac
22 UL/cUL:
22 A 1HP
125 Vac/250Vac
D
Quick connect
4,70 mm x 0,8 mm
[0.187 in x 0.032 in]
P
SPST-
NO
200
200 gf
1.96 N
A
Far from pin
plunger
01
Short straight
lever
K
USA
Ø2.9 mm
E
Quick connect
4,70 mm x 0,5 mm
[0.187 in x 0.020 in]
C
SPST-
NC
300
300 gf
2.94 N
B
Near pin
plunger
02
Std. straight
lever
400
400 gf
3.92 N
03
Long straight
lever
Simulated
roller lever
04
05
Roller lever
06
Long roller
lever
99
Special lever
ORDER GUIDE
The V-Basics standard V15 series provide customers with
the flexibility to request quotes FOB Hong Kong or FOB
Freeport. In addition, drop shipments can be arranged to any
location in Asia Pacific.
•
FOB Freeport orders will be entered using ICOM.
Lead time 8 weeks.
•
FOB New House orders will be entered using SAP.
Lead time 8 weeks.
•
FOB Hong Kong or drop shipments a special order
request form will need to be submitted please
contact your application engineer or product
manager for details.
Honeywell Sensing and Control
5
京公网安备 11010802033920号
EEWORLD
