SINE WAVE SOURCES
Q-TECH
CORPORATION
DUAL-IN-LINE CRYSTAL CLOCK OSCILLATORS
5.0 to 15Vdc - 10Hz to 450MHz
Description
The Q-Tech Sine Wave Sources encompasses state-of-the-art
sinewave source with low harmonic distortion and a precise
sinewave output.
A flexible design allows Q-Tech Corporation to offer a
variety of choices of output power and load. Based on this
flexibility, Q-Tech welcomes specifications with parameters
other than standard. An external trimming capacitor option
is available for applications that require a tight frequency
stability.
The AT-Cut crystal utilized in the design allows for high
stability for a particular temperature range extending from
-55ºC to +125ºC. For more information, please refer to the
stability vs. temperature on the following page.
The reliable construction of these sinewave oscillators
qualifies them for more stringent environmental
applications. Military screening per MIL-PRF-55310, Level
B is available as an option.
Ordering Information
Sample part number
Features
• Made in the USA
• ECCN: EAR99
• DFARS 252-225-7014 Compliant:
Electronic Component Exemption
• USML Registration # M17677
• Available in both DIP and Double DIP packages
• Supply voltages 5Vdc and 15Vdc
• Broad frequency range from 10Hz to 450MHz
• A
T-Cut crystal
• Low Total Harmonic Distortion
• Choice of output power and load
• All metal and hermetically sealed packages
• Low phase noise
• External tuning capacitor option
• Fundamental and third overtone designs
• Analog multiplier for frequency ≥ 200MHz
• Tristate option
• Custom design available tailors to meet customer’s needs
• Q-Tech does not use pure lead or pure tin in its products
• RoHS compliant
T = Standard
S = Solder Dip (*)
Model #
(See page 3)
Q T 9 0 1S 9M - 20 . 0 0 0M H z
QT 901 S 9 M - 20.000MHz
Output frequency
Screened to
MIL-PRF-55310,level B
(Left blank if no screening)
1
3(***)
4
5
6
9
10
11
12
=
=
=
=
=
=
=
=
=
± 100ppm
± 5ppm
± 50ppm
± 25ppm
± 50ppm
± 50ppm
± 100ppm
± 50ppm
± 100ppm
at
at
at
at
at
at
at
at
at
0ºC
0ºC
0ºC
-20ºC
-55ºC
-55ºC
-55ºC
-40ºC
-40ºC
to +70ºC
to +50ºC
to +70ºC
to +70ºC
to +105ºC
to +125ºC
to +125ºC
to +85ºC
to +85ºC
(*) Hot Solder Dip Sn60 per MIL-PRF 55310 is optional for an additional cost
(***) Requires an external capacitor
For custom load, supply voltage, output power, harmonic distortion, frequency
stability vs. temperature, and others not listed herein, please request a custom part
number.
For Non-Standard requirements, contact Q-Tech Corporation at
Sales@Q-Tech.com
Packaging Options
• Standard packaging in black foam
• Optional anti-static plastic tube
Other Options Available For An Additional Charge
Applications
• Designed to meet today’s requirements for communication
systems.
• Wide military clock applications
• Control and measurement
• Signal processing
•
•
•
•
•
Lead forming available on all packages. Please contact for details.
P. I. N. D. test (MIL-STD 883, Method 2020)
Lead trimming
Phase Noise test (Static and under vibration)
Jitter test
All DIP packages are available in surface mount form.
Specifications subject to change without prior notice.
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-te ch.com
Sine Wave Sources (Revision E, August 2010) (ECO# 9936)
1
SINE WAVE SOURCES
Q-TECH
CORPORATION
DUAL-IN-LINE CRYSTAL CLOCK OSCILLATORS
5.0 to 15Vdc - 10Hz to 450MHz
Electrical Characteristics
Parameters
Output freq. range (Fo)
Supply voltage (Vdd)
Maximum Applied Voltage (Vdd max.)
Other Design and Test Options
QT901S
10Hz — 1MHz (*)
+15Vdc ± 5%
+18Vdc
QT906S
QT941S
+5Vdc ± 10%
-0.5 to +7.0Vdc
QT957S
10Hz — 450MHz (*)
1MHz — 85MHz (**)
Sine Wave options are available with a Q-Tech
MCM part number:
• Supply voltage +5Vdc to +18Vdc
• Output power -10dBm to +13dBm into 50Ω
(see note 1)
• Harmonics better than -20dBc (see note 2)
• Sub-harmonics better than -30dBc (see note 3)
• Amplitude stability versus temperature to
within ±1% (see note 4)
• VCXO Sine Output (see details in VCXO data
sheets)
• Phase Noise and Jitter built to specification
including static and vibration.
• Low supply current
• QCI tests
• Tight frequency stability versus temperature,
supply voltage, and load variations
• Low g-sensitivity and low phase noise
• Low spurious (see note 5)
• Low Harmonic Distortion (THD < 5%)
• Low frequency aging, Allan Variance
• High-shock resistant
Notes:
1. The output level is determined by the supply
voltage, load, and package size.
2. A specified harmonic level of -20dBc is easily
achievable. The typical harmonics of Q-Tech Sine
Wave source are better than -25dBc.
3. Sub-harmonic level is determined by frequency
multiplication method, supply voltage, output
power, and input current.
4. Typical amplitude stability over temperature is
±10% or less.
5. Typical spurious level is better than -60dBc over the
spectrum of 100kHz to 1GHz.
Frequency stability (∆F/∆T)
Operating temp. (Topr)
Storage temp. (Tsto)
20mA max.
Operating supply current (Idd)
Output amplitude or power
1V RMS min.
2V RMS typ.
See Option codes
See Option codes
-62ºC to + 125ºC
40mA max.
20mA typ. at 25MHz
30mA typ. at 50MHz
0dBm min.
+5dBm typ.
60mA max.
40mA typ. at 175MHz
1V p-p min. for Fo < 1MHz
0dBm min. for F ≥1MHz
Output Load
1kΩ
50Ω
Internally AC coupled
-20dBc max.
-30dBc max.
10ms max.
10Hz
100Hz
1kHz
10kHz
100kHz
-70dBc/Hz
-100dBc/Hz
-125dBc/Hz
-140dBc/Hz
-145dBc/Hz
1ps
1kΩ for Fo < 1MHz
50Ω for Fo ≥ 1MHz
Total Harmonic Distortion (THD) or
harmonics
Sub-harmonics
Start-up time
Phase Noise at 25ºC (typ.) at:
5% max.
Integrated Phase Jitter RMS
(12kHz to 20MHz) typ.
Aging (at 70ºC)
± 5ppm max. first year / ± 2ppm typ. per year thereafter
(*) Frequencies less than 500Hz require an external 1µF AC coupling capacitor at the output pin.
(**) Higher frequencies are available with a Q-Tech custom part number.
Q-TECH Corporation
-
10150 W. Jefferson Boulevard, Culver City 90232
-
Tel: 310-836-7900 - Fax: 310-836-2157
-
www.q-t e c h.c o m
Sine Wave Sources (Revision E, August 2010) (ECO# 9936)
2
SINE WAVE SOURCES
Q-TECH
CORPORATION
DUAL-IN-LINE CRYSTAL CLOCK OSCILLATORS
5.0 to 15Vdc - 10Hz to 450MHz
Package Configuration Versus Pin Connections
A
QT901S
Q-TECH
P/N
FREQ.
D/C S/N
B
QT906S
Q-TECH
P/N
FREQ.
D/C S/N
C
QT941S
Q-TECH
P/N
FREQ.
D/C S/N
.200
(5.08)
.200
(5.08)
.018
(.457)
.800
(20.32)
1.080
(27.43)
MAX.
.200
MAX.
(5.08)
.200
MIN.
(5.08)
.018
(.457)
.600
(15.24)
.018
(.457)
.600
(15.24)
.200
MAX.
(5.08)
.200
MIN.
(5.08)
MIN.
MAX.
.880
MAX.
(22.35)
.800
(20.32)
MAX.
1
9
.505
.300
(7.62)
(12.83)
1
7
.505 MAX.
.300 (12.83)
(7.62)
1
14
7
8
.300
(7.62)
.505
MAX.
(12.83)
18
10
14
8
Ø .056
Ø 1.42
.100
(2.54)
.100
(2.54)
D
QT957S
Q-TECH
P/N
FREQ.
D/C S/N
QT #
QT901S
QT906S
.200 MAX.
(5.08)
.250 MIN.
(6.35)
.018
(0.457)
.700
(17.78)
.980
(24.89)
MAX.
Conf
A
B
C
D
Vcc
18
14
14
16
GND
9
7
7
8
Equivalent
Case Output MIL-PRF-55310
Configuration
9
7
7
8
10
8
8
9
N/A
N/A
N/A
N/A
QT941S
QT957S
Please contact factory for pin connections on external capacitor (code 3).
Package Information
1
8
.805
.600
(15.24)
(20.45)
MAX.
• Lead material: Kovar
• Lead finish: Gold Plated: 50μ ~ 80μ inches
Nickel Underplate: 100μ ~ 250μ inches
• Package to lid attachment: Resistance weld
• Weight: 4.0g typ., 14.2g max.
16
9
.100
(2.54)
Dimensions are in inches (mm)
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-te ch.com
Sine Wave Sources (Revision E, August 2010) (ECO# 9936)
3
SINE WAVE SOURCES
Q-TECH
CORPORATION
DUAL-IN-LINE CRYSTAL CLOCK OSCILLATORS
5.0 to 15Vdc - 10Hz to 450MHz
Output Waveform into 50Ω load
Test Circuit
+15Vdc
0.01uF
Vcc
Out
OUTPUT
QT901S
1k
GND
+15V
0.01µF
Vcc
Typical output amplitude of QT957S-69.4MHz
Out
OUTPUT
1µF
1k
QT901S(<500Hz)
GND
+5Vdc
0.01µF
Vcc
QT906S
QT941S
QT957S
Out
50
GND
OUTPUT
Typical spectrum output power and harmonics of QT957S-171MHz
Startup Time
Typical output amplitude and start-up time of QT957S-20.0166MHz
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-te ch.com
Sine Wave Sources (Revision E, August 2010) (ECO# 9936)
4
SINE WAVE SOURCES
Q-TECH
CORPORATION
DUAL-IN-LINE CRYSTAL CLOCK OSCILLATORS
5.0 to 15Vdc - 10Hz to 450MHz
Thermal Characteristics
The heat transfer model in a hybrid package is described in
figure 1 (Based on single ASIC design).
D/A epoxy
D/A epoxy
Die
45º
Heat
Hybrid Case
45º
Substrate
Heat spreading occurs when heat flows into a material layer of
increased cross-sectional area. It is adequate to assume that
spreading occurs at a 45° angle.
The total thermal resistance is calculated by summing the
thermal resistances of each material in the thermal path
between the device and hybrid case.
RT = R1 + R2 + R3 + R4 + R5
The total thermal resistance RT (see figure 2) between the heat
source (die) to the hybrid case is the Theta Junction to Case
(Theta JC) in°C/W.
• Theta junction to case (Theta JC) for this product is 24°C/W.
• Theta case to ambient (Theta CA) for this part is 106°C/W.
• Theta Junction to ambient (Theta JA) is 130°C/W.
Maximum power dissipation PD for this package at 25°C is:
• PD(max) = (TJ (max) – TA)/Theta JA
• With TJ = 175°C (Maximum junction temperature of die)
• PD(max) = (175 – 25)/130 = 1.15W
JA
R1
R2
R3
R4
R5
Die
D/A epoxy
Substrate
D/A epoxy
Hybrid Case
(Figure 1)
T
CA
A
T
C
JC
T
J
Die
JC
CA
(Figure 2)
Environmental Specifications
Q-Tech Standard Screening/QCI (MIL-PRF55310) is available for all of our Sine Wave packages. Q-Tech can also customize
screening and test procedures to meet your specific requirements. The Sine Wave packages are designed and processed to exceed the
following test conditions:
Environmental Test
Temperature cycling
Constant acceleration
Seal: Fine and Gross Leak
Burn-in
Aging
Vibration sinusoidal
Shock, non operating
Thermal shock, non operating
Ambient pressure, non operating
Resistance to solder heat
Moisture resistance
Terminal strength
Resistance to solvents
Solderability
ESD Classification
Moisture Sensitivity Level
Test Conditions
MIL-STD-883, Method 1010, Cond. B
MIL-STD-883, Method 2001, Cond. A, Y1
MIL-STD-883, Method 1014, Cond. A and C
160 hours, 125°C with load
30 days, 70°C
MIL-STD-202, Method 204, Cond. D
MIL-STD-202, Method 213, Cond. I
MIL-STD-202, Method 107, Cond. B
MIL-STD-202, 105, Cond. C, 5 minutes dwell time minimum
MIL-STD-202, Method 210, Cond. C
MIL-STD-202, Method 106
MIL-STD-202, Method 211, Cond. C
MIL-STD-202, Method 215
MIL-STD-202, Method 208
MIL-STD-883, Method 3015, Class 1HBM 0 to 1,999V
J-STD-020, MSL=1
Please contact Q-Tech for higher shock requirements
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-te ch.com
Sine Wave Sources (Revision E, August 2010) (ECO# 9936)
5
京公网安备 11010802033920号
EEWORLD
