This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
703-1029_3.2 x 2.8mm SMD Typea | 13 July 2012 4:56 PM
3.2 x 2.8mm SMD Type
Electrical & Optical Characteristics:
Parameter
E
F
Luminous Intensity
G
H
I
Luminous Flux
V20
V21
V22
Forward Voltage
V23
V24
V25
V26
WA
Correlated Colour
Temperature
WB
WC
WD
WE
Reverse Current
View Angle
I
r
2θ½
Vr = 5V
IF = 20 mA
CCT
IF = 20 mA
Vf
IF = 20 mA
Φ
v
IF = 20 mA
Iv
IF = 20 mA
Symbol
Condition
Value
Min.
1600
1800
2000
2200
2400
-
2.9
3.0
3.1
3.2
3.3
3.4
3.5
5000
5250
5500
5750
6000
-
-
Typ.
-
-
-
-
-
5800
-
-
-
-
-
-
-
-
-
-
-
-
-
120
Max.
1800
2000
2200
2400
2600
-
3.0
3.1
3.2
3.3
3.4
3.5
3.6
5250
5500
5750
6000
6250
50
-
μA
deg
K
V
mlm
mcd
Unit
Notes:
1. The data is tested by an IS tester.
2. Customer’s special requirements are also welcome.
Important Notice:
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
703-1029_3.2 x 2.8mm SMD Typea | 13 July 2012 4:56 PM
3.2 x 2.8mm SMD Type
Storage:
Recommended storage environment:
• Temperature: 5°C ~ 30°C (41°F ~ 86°F)
• Humidity: 60% RH Max.
• Moisture measures: Please refer to Moisture-sensitive label on reels package bags. If unused LEDs remain, they should be stored in moisture
proof packages, such as a sealed container with packages of moisture absorbant material (silica gel). It is also recommended
to return the LEDs to the original moisture proof bag and to reseal it again (fold the open bag firmly shut and keep in a dry
environment.
Soldering:
Reflow Soldering
Lead Solder
Pre-heat
Pre-heat Time
Peak Temperature
Soldering Time
Condition
120 ~ 150°C
120sec. Max.
240°C Max.
10sec.
max.
Refer to Temperature-
profile 1
Lead-free Solder
180 ~ 200°C
120sec. Max.
260°C Max.
10sec.
Max.
Refer to Temperature-
profile 2
3sec. Max. (one time only)
Temperature
Soldering Time
350°C Max.
Hand Soldering
* After reflow soldering rapid cooling should be avoided.
Temperature-profile (Surface of circuit board):
Use the following conditions shown in the figure.
＜1
: Lead Solder＞
2.5~5°C/sec.
Pre-heating
120~150
°C
120sec. Max.
2.5~5°C/sec.
2.2
＜2
: Lead-free Solder＞
240°C Max.
10sec. M
ax.
1~5°
C/sec.
Pre-heatin
g
180~200°C
120 M
sec. ax.
1~5°
C/sec.
260°C Ma
x.
10sec.Max.
60sec.M
ax.
60sec. M
ax.
1.4
1.8
1.4
(UNIT:mm)
Important Notice:
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
Ultrasonic drive circuitThe topologies available for the drive circuit include push-pull, half-bridge and full-bridge.1. In the push-pull circuit, the switch tube drive is common ground, no isolation ...
Some people say that the SWD debugging of stm32f407 has 5 lines, [color=rgb(79, 79, 79)][backcolor=transparent][font="]VCC, GND, RST, SWDIO, SWDCLK. Others say it is [/font][/backcolor][/color][color=...
Recruiting part-time lecturers or technical support personnel in related majors such as DSP, short-term training or technical support, weekends, Beijing, Shanghai, Guangzhou, Shenzhen, Chengdu, Wuhan,...
In order to understand how TI-RTOS works, I found the example of SDK - uartecho project in the driver directory under rtos for analysis. The purpose of this example is very simple, that is, to receive...
[i=s]This post was last edited by Xu Huiqing on 2021-12-15 22:37[/i]Today, I will focus on sharing the serial communication content of the Erha image recognition visual sensor. Through this article, w...
An oscilloscope is an electronic measuring instrument with a wide range of uses. It can transform invisible electrical signals into visible images, making it easier for people to study the changing p...[Details]
1. Introduction UPS, uninterruptible power supply, refers to a form of power supply that can provide reliable and stable power supply to the load under normal or faulty conditions of the mains. ...[Details]
Project Background
At present, the passenger vehicle management in my country is basically a contracting system or private vehicle owners. This makes some contractors or vehicle owners, in...[Details]
Transformer no-load test As an important performance parameter of the transformer, the loss of the transformer directly affects the efficiency of the transformer during operation. On the other hand, ...[Details]
IT Home reported on May 10 that yesterday, Sogou Input Method announced that the Sogou Input Method × Xiaomi MIUI customized version of Elder Mode is online. Sogou Input Method said that data ...[Details]
MS8040 is a cost-effective chip developed by Shanghai Shengsi Microelectronics Co., Ltd.; the chip integrates a 250V high-voltage three-phase gate driver, the MCU core is a 32-bit ARM Cortex-M0, th...[Details]
Recently, a movie about firefighters, "The Bravest", has become a hit in the summer. In the movie, firefighters use their lives to protect the lives and property of the country and the people. Their ...[Details]
A constant current source is a power source that can output a constant current. The application field of constant current sources is very broad. However, many occasions where constant current ...[Details]
Contents The invention relates to a thermal porous plate gas flow meter applied to an uneven flow field, belonging to the technical field of gas flow measurement. Background of the Invention Gas fl...[Details]
The CEO of foundry GlobalFoundries said the company is preparing for an initial public offering (IPO). As demand for chips for mobile phones, cars and connected devices continues to increase, a stock...[Details]
The online UPS power supply has a low power circuit failure rate because of its reasonable circuit design and large margin of driving power component capacity. In contrast, the failure rate caused by ...[Details]
As mobile phones, MP3, PMP, DC/DV and other handheld electronic products become more and more popular, lithium metal (Li) and lithium ion (Li+) batteries are becoming more and more common. Most of th...[Details]
code show as below: RCC_ClocksTypeDef get_rcc_clock; //Get system clock status RCC_GetClocksFreq(&get_rcc_clock); //When simulating, you can see the clocks of various peripherals in the str...[Details]
Recently, Huanggang Customs under Shenzhen Customs seized a batch of used Apple mobile phones. According to the news released by the customs, a truck was declared to enter the country empty. When t...[Details]
When it comes to the hottest tracks at the moment, BMS must have a place.
New energy vehicles, energy storage, and automotive electronics are in a period of rapid growth. Accordingly, ...[Details]
Discrete Device
京公网安备 11010802033920号
EEWORLD
