SOT363
TSSOP6; Tape reel SMD; standard product orientation 12NC
ending 115
Rev. 1 — 13 November 2012
Packing information
1. Packing method
Printed plano box
Barcode label
Reel
Tape
Barcode label
Circular sprocket holes opposite the
label side of reel
Cover tape
QA Seal
Carrier tape
msc074
Fig 1.
Table 1.
Package
version
SOT363
[1]
Reel pack for SMD
Packing information
12NC
ending
115
Reel dimensions
d x w (mm)
[1]
180 x 8
SPQ/PQ
(pcs)
3000
Reels
per box
1
Outer box dimensions
l x w x h (mm)
186 x 186 x 16
d = reel diameter; w = tape width.
NXP Semiconductors
SOT363
TSSOP6; Tape reel SMD; standard product orientation 12NC ending 115
2. Product orientation
Standard product orientation SOT363 (T1)
direction of feed
Fig 2.
Product orientation in carrier tape
3. Carrier tape dimensions
4
A
0
K
0
W
B
0
P
1
mdb579
direction of feed
Fig 3.
Carrier tape dimensions
Table 2.
Carrier tape dimensions
In accordance with IEC 60286-3.
A
0
(mm)
2.25
B
0
(mm)
2.25
K
0
(mm)
1.2
T (mm)
-
P
1
(mm)
4.0
W (mm)
8
Limited warranty and liability
Information in this document is believed to be accurate and reliable. However, NXP
Semiconductors does not give any representations or warranties, expressed or implied, as
to the accuracy or completeness of such information and shall have no liability for the
consequences of use of such information.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 13 November 2012
Document identifier: SOT363_115
京公网安备 11010802033920号
EEWORLD
