Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
“TAIYO
YUDEN’ official sales channel”
tors (so called
s
).
It is only applicable to the products purchased from any of TAIYO YUDEN’ official sales channel.
s
■
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■
Caution for export
Certain items in this catalog may require specific procedures for export according to
“Foreign
Exchange and For-
eign Trade Control Law”of Japan,
“U.S.
Export Administration Regulations” and other applicable regulations.
,
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
1
notice_e-01
WOUND TORROIDS AND BEADS
WAVE
■
FEATURES
◦
Use of high loss ferrite materials for excellent high frequency noise
absorption.
◦
High impedance for normal mode applications.
◦
05 RD type available in taping for automatic insertion.
◦
06 BT type is designed for high current applications (3A).
■
APPLICATIONS
◦
Absorption of high frequency noise from digital equipment data lines.
■
OPERATING TEMP.
◦ー25℃½105℃
(Including
self-generated heat)
■
ORDERING CODE
【FL-R
/ RD Type】
F
❶
L
0
❷
5
R
❸
D
2
0
❹
0
A
E
A
❺
T
○
❻
❼
△
T
Z
ー
❻Packaging
Bulk
Tape & Reel
Ammo
Special code
△=Blank
space
❶Type
Wound torroids
FL
and beads
❷Dimensions
of core
05
4.8mm
【FL-BT
Type】
❸Shape
Ring core,
R△
with single wire lead
Ring core,
RD
with case, pin type
△=Blank
space
❹Nominal
inductance
(μH)
example
❺Inductance
tolerance
Higher than normal value
Special tolerance
△
07
1R0
200
1.0
20.0
※R=decimal
point
❼Internal
code
Standard product
Product classification
code
△=Blank
space
F
❶
L
0
❷
6
B
❸
T
0
❹
4
○
❺
❹Product
classification code
04
△
❺Internal
code
Standard product
△=Blank
space
❶Type
FL Wound torroids and beads
❷Dimensions
of core
(diameter)
06
6.0mm
BT
❸Shape
Cylinder,
porous core
■
EXTERNAL DIMENSIONS/MINIMUM QUANTITY
Type
〔05RD〕
9.0max
(0.35max)
3.7max
(0.146max)
4.0±1
9.0max
(0.157±0.039)
(0.351max)
〔05R〕
〔06BT04〕
6.5max
3.0max
(0.256max)
(0.118max)
15.2max
(0.598max)
Fig.
φ0.6
(φ0.024)
+0.6
5.0
ー0.2
+0.024
(0.197
ー0.008
φ0.3
(φ0.012)
φ6.0±0.2
(φ0.24±0.008)
)
Minimum
Quantity
(pcs.)
Bulk
Tape & Reel
Ammo
400
2000
1500
500
ー
ー
250
ー
ー
Unit : mm (inch)
■
IMPEDANCE-FREQUENCY CHARACTERISTICS
Measured by HP4291A
FL05RD / FL05R TYPE
FL06BT TYPE
Please contact TAIYO YUDEN for further information in regard to other characteristics.
*
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
120
1
filter01_e-01
■
PART NUMBERS
Ordering code
FL05RD 1R0E□
FL05R 100A
FL05RD 100A□
FL05R 200A-07
FL05RD 200A□
FL06BT 04
EHS (Environmental
Hazardous
Substances)
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Inductance
[μH]
1.0
+1.0
-0.5
10 min.
20 min.
ー
Impedance
〔Ω〕
(typical)
800
900
2000
1000
(at 400MHz)
(at 200MHz)
(at 100MHz)
(at 150MHz)
DC Resistance
〔Ω〕
(max)
0.08
0.05
1.5
0.08
0.05
3.0
Rated current
〔A〕
(max)
0.5
□Please
specify the packaging code (T : Tape & reel, Z : ammo, Blank space : bulk)
FERRITE PRODUCTS
*
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
filter01_e-01
1
121
■
PACKAGING
①Minimum
Quantity
Type
FL05R
FL05RD
FL06BT
Bulk
500
400
250
Minimum Quantity (pcs.)
Tape & Reel
ー
2000
ー
Ammo
ー
1500
ー
②Taping
dimensions
◦FL05RD
Type
Symbol
D
1
H
2
T
H
1
H
P
P
0
P
1
P
2
W
1
F
d
△h
W
W
0
W
2
ℓ
D
0
L
t
Dimension
9.0 max. (0.354 max.)
9.0 max. (0.354 max.)
3.7 max. (0.146 max.)
31.0 max. (1.22 max.)
18.0±1.0 (0.709±0.039)
12.7±1.0 (0.500±0.039)
12.7±0.3 (0.500±0.012)
※1
3.85±0.8 (0.152±0.031)
6.35±1.3 (0.250±0.051)
9.0
+0.75
(0.354
+0.030
)
ー0.5
ー0.020
+0.6
5.0
ー0.2
(0.197
+0.024
)
ー0.008
FL05RD
φ0.6
(φ0.024)
0±2.0 (0±0.079)
18.0
+1.0
(0.709
+0.024
)
ー0.5
ー0.008
12.5 min.
3.0 min.
0 max.
4.0±0.3
11.0 max.
0.7±0.2
(0.492 min.)
(0.118 min.)
※2
(0 max.)
(0.157±0.012)
(0.433 max.)
(0.028±0.008)
Unit : mm (inch)
※1
Accumulated error for 20 pitches shall be within
±2mm.
※2
Pasting tape shall not exceed paste board.
③Reel
size
◦FL05RD
Dimensions in parenthesis are measured value.
60 or less 53〕
〔
(2.362
or less 2.087〕
〔
)
Unit : mm (inch)
*
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
filter01_pack-P1
1
filter01_pack_e-01
■
RELIABILITY DATA
1. Operating temperature Range
LA Type
CAL45 Type
ー25∼+105℃
LHL□□□
FBA/FBR
ー25∼+85℃
FL05□ Type
ー25∼+105℃
FL06BT Type
【Test
Method and Remarks】
LA
・CA
・FL
: Including self-generated heat
LHL□□□ : Including self-generated heat
2. Storage temperature Range
LA Type
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
ー40∼+85℃
3. Rated current
LA Type
CAL45 Type
LHL□□□
Within the specified tolerance
FBA/FBR
FL05□ Type
FL06BT Type
【Test
Method and Remarks】
: The maximum DC value having inductance within 10% and temperature incease within 40℃ (LA:20℃) by the application of DC bias.
LA, CA
LHL□□□ : The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10:within 30%) and temperature increase within the following specified
temperature by the application of DC bias.
Reference temperature : 25℃ (LHL08, LHL10, LHL13)
: 30℃ (LHL16, LHLP□□)
: 40℃ (LHLC08, LHLC10)
FB
: No disconnection or appearance abnormality by continuous current application for 30 min. Change after the application shall be within
±20%
of the initial value.
This is not guaranteed for electrial characteristics during current application.
FL
: The maximum DC value having temperature rise within specified value.
4. Impedance
LA Type
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test
Method and Remarks】
FB
: Measuring equipment
Measuring frequency
FL06BT : Measuring equipment
Measuring frequency
Within the specified tolerance
Refer to individual specification
:
:
:
:
Impedance analyzer (HP4191A) or its equivalent
Specified frequency
4291A (HP) or its equivalent
Specified frequency
5. Inductance
LA Type
CAL45 Type
Within the specified tolerance
LHL□□□
FBA/FBR
Within the specified tolerance
FL05□ Type
FL06BT Type
【Test
Method and Remarks】
: Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent)
LA, CA
Measuring frequency : Specified frequency
LHL□□□ : Measuring equipment : LCR meter (HP4285A+HP42851A or its equivalent)
LCR meter (HP4263A) or its equivalent (at 1KHz)
Measuring frequency : Specified frequency
FL05R□ : Measuring equipment : HP4262A or its equivalent
Measuring frequency : 1kHz
6. Q
LA Type
Within the specified tolerance
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test
Method and Remarks】
LA : Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent)
Measuring frequency : Specified frequency
LHL□□□ (except LHLP) : Measuring equipment : LCR meter (HP4285A+HP42851A or its equivalent)
LCR meter (HP4263A) or its equivalent (at 1kHz)
Measuring frequency : Specified frequency
*
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.