-
Positioning is an important supporting technology for wireless sensor networks (WSN) and has a wide range of applications. ZigBee technology is a short-range, low-power, low-data-rate, low-cost two...[Details]
-
In a harsh environment where factors such as temperature, pressure, humidity, vibration, noise and electromagnetics may change at any time, using general network technology to build a monitoring sy...[Details]
-
A prosthesis is a substitute for a missing limb in the human body, which is used to make up for the shape and function of the missing limb. In this paper, a control system for a humanoid arm-shaped...[Details]
-
According to reports, from now on Russian and Belarusian entities can only buy CPUs from Taiwanese companies that run at frequencies below 25 MHz and provide up to 5 GFLOPS of performance. This basic...[Details]
-
Last month, GM released Ultra Cruise, which promises to provide "door-to-door hands-free" functionality in 95% of driving scenarios on suburban and urban streets in the United States and Canada, a bi...[Details]
-
High voltage differential probes are mainly used to observe differential signals. Differential signals are signals that are referenced to each other rather than to ground. Ordinary single-ended pro...[Details]
-
RM3545 is a 6.5-digit, 1,200,000-point display, and the minimum resolution can measure resistance of 0.01μΩ. It is suitable for fields requiring high-resolution resistance measurement such as coil in...[Details]
-
On June 21, Xinlian Integrated Circuit announced that the company intends to acquire the remaining 72.33% equity of its holding subsidiary Xinlian Yuezhou Integrated Circuit Manufacturing (Shaoxing...[Details]
-
On July 6, the Shenzhen Stock Exchange officially accepted the GEM listing application of Dongguan Dari Electronics Co., Ltd. (hereinafter referred to as Dari Electronics). According to the prospec...[Details]
-
Symptom: Symptom: After the arm is started, the application interface is not displayed normally (part of the left side is not displayed normally), that is, there is one less area on the left and on...[Details]
-
The parameter commonly used in communication engineering to describe signal phase distortion - group delay (also called envelope delay) is defined as: the slope of the characteristic phase shift of ...[Details]
-
According to the Ministry of Science and Technology, an international research team from the RIKEN Institute of Physical and Chemical Research has successfully achieved the operational accuracy requi...[Details]
-
1. The output power decreases and the sound becomes weak
1. Aging of the power tube. The screen current of the power tube can be measured. Use a 100ma DC meter, connect the negative pen to the...[Details]
-
Author(s):
David Hakey - Medtronic, Inc.
Patrick J. Ryan - Medtronic, Inc.
Johnny Maynes - Medtronic, Inc.
Industry:
Electronics, Biotechnology
Products:
NI-VISA, LabV...[Details]
-
Qualcomm Incorporated (NASDAQ: QCOM) and Saudi Arabian company Dallah Trans Arabia Limited Liability Company (hereinafter referred to as "Dallah") announced today that the two parties have signed a p...[Details]