3-MODE 300mA LDO REGULATOR
RP200x SERIES
Preliminary
NO. EA-182-080911
OUTLINE
The RP200x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy and low
supply current. These ICs perform with the chip enable function and realize a standby mode with ultra low supply
current. To prevent the destruction by over current, the current limit circuit is included. The RP200x Series have
3-mode. One is standby mode with CE or standby control pin. Other two modes are realized with FMODE pin™.
Fast Transient Mode (FT mode) and Fast mode and Low Power auto-change Mode (Auto ECO mode) are
alternative with Auto-Eco pin (AE pin). Consumption current of IC itself at light load is automatically reduced at
Auto ECO Mode compared with Fast Transient Mode. The output voltage is maintained between FT mode and
Auto ECO mode.
Without FMODE pin type is also available. It is an LDO regulator with Auto ECO mode. (RP200Z in WLCSP.)
Since the packages for these ICs are SOT23-5, SC-88A, thin DFN(PLP)1212-6, and WLCSP-4-P5 packages,
high density mounting of the ICs on boards is possible. RP200Q(SC-88A), RP200K (DFN(PLP)1212-6) and
RP200N (SOT23-5) has Auto ECO pin (AE pin), then if the AE pin is "H", fast mode is available. If the AE pin is
set at "L" level, auto ECO mode operation is available.
FEATURES
Ultra-Low Supply Current..................................... Typ. 1.0µA (Iout=0mA, V
OUT
≤1.85V
at Auto ECO mode),
.......................................................................... Typ. 55µA (Iout=10mA at Auto ECO mode)
Low Dropout Voltage............................................ Typ. 0.23V (I
OUT
=300mA
Output Voltage=3.0V Type)
High Ripple Rejection .......................................... Typ. 70dB (f=1kHz, Fast Mode)
Excellent Line Regulation .................................... Typ. 0.02%/V (I
OUT
=10mA)
High Output Voltage Accuracy .............................
±1%
Small Package ................................................... DFN(PLP)1212-6, WLCSP-4-P5, SC-88A, SOT23-5
Output Voltage Range.......................................... Stepwise setting with a step of 0.1V
in the range of 0.8V to 4.0V is possible
Input Voltage Range
1.40V to 5.25V
Built-in fold-back protection circuit ....................... Typ. 50mA (Current at short mode)
Performs with Ceramic Capacitors ...................... C
IN
=1.0µF,C
OUT
=Ceramic
1.0µF
APPLICATIONS
Power source for electrical appliances such as cameras, VCRs and hand-held communication equipment
Power source for battery-powered equipment
1
RP200x
Preliminary
SELECTION GUIDE
The output voltage, the auto-discharge function, the package and the taping type for the ICs can be selected
at the user's request. The selection can be available by designating the part number as shown below;
RP200xxxxx-xx
↑ ↑ ↑↑ ↑
a b a' c d
Code
←Part
Number
Contents
Designation of Package Type:
a=N, a'=1: SOT-23-5
a=Z, a'=1: WLCSP-4-P5
a=K, a'=1: DFN(PLP)1212-6
a=Q, a'=2: SC-88A
Setting Output Voltage (V
OUT
):
Stepwise setting with a step of 0.1V in the range of 0.8V to 4.0V is possible.
New options: 2.85V type: RP200x281x5-xx, 1.85V type: RP200x181x5-xx.
Designation of Chip Enable Options:
D: "H" active and with auto-discharge function.
Designation of Taping Type:
Refer to Taping Specifications: TR type is the standard direction.
a, a'
b
c
d
PIN CONFIGURATIONS
z
5
SOT-23-5
4
z
CE
6
GND
5
AE
4
DFN(PLP)1212-6
AE
4
GND
5
CE
6
(mark side)
TOP VIEW
1
2
3
BOTTOM VIEW
1
V
DD
2
NC
3
V
OUT
3
V
OUT
2
NC
1
V
DD
3
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
