SEAF-15-05.0-SM-10-2-A-PP-K-TR datasheet, PDF

Datasheet> All Categories > The connector> The connector> SEAF-15-05.0-SM-10-2-A-PP-K-TR

SEAF-15-05.0-SM-10-2-A-PP-K-TR: DescriptionBoard Connector, 150 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator; CategoryThe connector The connector; File Size1MB，5 Pages; ManufacturerSAMTEC; Websitehttp://www.samtec.com/

Download Datasheet Parametric View All

SEAF-15-05.0-SM-10-2-A-PP-K-TR Overview

Board Connector, 150 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator

SEAF-15-05.0-SM-10-2-A-PP-K-TR Parametric

Parameter Name	Attribute value
Maker	SAMTEC
Reach Compliance Code	compliant
body width	0.523 inch
subject depth	0.199 inch
body length	0.979 inch
Connector type	BOARD CONNECTOR
Contact to complete cooperation	AU ON NI
Contact completed and terminated	TIN OVER NICKEL
Contact point gender	FEMALE
Contact material	COPPER ALLOY
contact mode	RECTANGULAR
Insulator color	BLACK
insulator material	LIQUID CRYSTAL POLYMER (LCP)
Manufacturer's serial number	SEAF
Plug contact pitch	0.05 inch
Installation method	STRAIGHT
Installation type	BOARD
Number of connectors	ONE
PCB row number	10
Number of rows loaded	10
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
PCB contact pattern	RECTANGULAR
Plating thickness	30u inch
polarization key	POLARIZED HOUSING
Rated current (signal)	1.8 A
Guideline	UL
reliability	COMMERCIAL
Terminal pitch	1.27 mm
Termination type	SURFACE MOUNT
Total number of contacts	150

Preview

Download Datasheet

View All

REVISION BF

DO NOT

SCALE FROM

THIS PRINT

.156 3.96 REF

.033 0.84 REF

.361 9.17 REF

"A" REF

"C" SPCS. @ .0500= "D"

.0500 1.270 (TYP)

.033 0.84

REF

No OF POSITIONS

SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR

K-DOT

(SEE SHT 2, FIG. 3 )

(SEE NOTE 7)

OPTION

****-LP: LATCH POST OPTION

(SEE SHT. 4, FIG. 8 )

(ONLY AVAILABLE WITH -05.0

LEAD STYLE, -04, -06, -08 & -10

(ROW

***** -RP: RETENTION PIN

(SEE SHT. 4, FIG. 9)

(ONLY AVAILABLE WITH -05.0

LEAD STYLE, 6, 8 & 10 ROWS)

-PP: POLARIZATION PIN

(SEE SHT. 4, FIG. 10)

(ONLY AVAILABLE WITH -05.0

LEAD STYLE, 6, 8 & 10 ROWS)

ALIGNMENT PINS

(SEE NOTES 6, 12 & 14)

SOLDER COMPOSITION & STYLE

-1: 63% TIN / 37% LEAD

CHARGE TAIL

(USE NEW-SUB-C-209-XX.X-X-

)

-2: 95.5% TIN/3.8% SILVER/.7%

COPPER

CHARGE TAIL

(USE NEW-SUB-C-209-XX.X-X-

)

°-3:

63% TIN / 37% LEAD

CRIMP TAIL (SEE NOTE 16)

(USE SUB-C-305-XX.X-X-

) (SEE SHT. 5, FIG. 12)

(ONLY AVAILABLE ON -05.0,

-06.0, -06.5 & -07.5 LEAD STYLES)

°-4:

95.5% TIN/3.8% SILVER/.7%

COPPER

CRIMP TAIL (SEE NOTE 16)

(USE SUB-C-305-XX.X-X-

) (SEE SHT. 5, FIG. 12)

(ONLY AVAILABLE ON -05.0,

-06.0, -06.5 & -07.5 LEAD STYLES)

"A"

-10, -15,

**-19,

-20

-25, -30, -40, -50

(PER ROW)

LEAD STYLE

-05.0: .199[5.06] HEIGHT

-06.0: .238[6.05] HEIGHT

-06.5: .258[6.55] HEIGHT

*** -07.5: .297[7.54] HEIGHT

(SEE TABLE 1)

PLATING SPECIFICATION

-L: LIGHT GOLD (10µ”) IN CONTACT AREA,

MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-L-X

or SUB-C-305-XX.X-L-X)

-S: SELECTIVE GOLD (30µ”) IN CONTACT AREA,

MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-S-X

or SUB-C-305-XX.X-S-X)

-SM: SELECTIVE GOLD (30µ”) IN CONTACT AREA,

MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-S-X

or SUB-C-305-XX.X-S-X)

ROWS

-04: 4 ROWS (SEE SHT. 5, FIG. 11)

-05: 5 ROWS (SEE SHT. 3, FIG. 5)(SEE NOTE 18)

-06: 6 ROWS (SEE SHT. 3, FIG. 4)

-08: 8 ROWS (SEE SHT. 1, FIG. 1)

-10: 10 ROWS (SEE SHT. 2, FIG. 2)

.421 10.69

REF

.200 5.08

REF

SEE NOTE 17

"B" REF

SEAF-XX-XX.X-08-A

"A"

'C'

"F" REF

.050 1.27 (TYP)

"C" SPCS. @ .0500= "D"

.050 1.27 REF

.040 1.02 REF

.034 0.86 REF

.044 1.12 REF

"G" REF

* = NOT TOOLED

= 10 POSITION ONLY AVAILABLE IN 4 ROW.

= ONLY AVAILABLE WITH -05.0 BODY HEIGHT,

-10 ROW.

= ONLY AVAILABLE WITH -05.0 AND -06.5

BODY HEIGHT AND 4 ROW.

** = ONLY AVAILABLE WITH -06.5 BODY HEIGHT,

AND -06 ROW.

*** = ONLY AVAILABLE WITH 30 POS & 4 ROW.

**** = ONLY AVAILABLE WITH -05.0 BODY HEIGHT,

-04, -06, -08 & -10 ROW.

***** = NOT RELEASED FOR PRODUCTION.

° =AVAILABLE TO EXISTING CUSTOMERS ONLY.

.044 1.12 REF

"E" REF

-08: 8 ROW

(SEAF-20-05.0-XX-08-1-A-XX-K-TR SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

NOTES:

REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM PUSHOUT FORCE: 0.50 LBS.

3. NOTE DELETED.

4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH - DIM .321 [8.15], (SEE SHEET 3, FIG. 5).

5. WHEN APPLICABLE, DIMENSION C12 MUST BE MEASURED USING INSPECTION FIXTURE AT-1817-836-1

FOR -04 ROW, OR AT-1817-836-2 FOR -06, -08 & -10 ROW. USE CO-AU-WI-2003-M FOR PROCESS.

6. WITHOUT -A AVAILABLE FOR EXISTING CUSTOMERS ONLY AS OF REVISION Y.

7. K-DOT WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED.

8. TAPE & REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED.

9. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.

FOR QUANTITIES OF 50 - 124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.

SPLICES MAY BE PRESENT.

10. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE.

11. SOLDER CHARGE VOLUME IS .00000891 CUBIC INCHES (REF).

12. FOR VITA REQUIREMENTS, -A PIN SHOULD NOT BE ORDERED.

13. SLOT ORIENTATION MUST BE AS SHOWN.

14. A-PINS STANDARD ON ALL BODIES, EXCEPT 6 x 19, SEE SHEET 1, FIG. 1

A-PINS ARE OPTIONAL ON 6 x 19, SEE SHEET 4, FIG. 7

15. MAXIMUM ROW TO ROW VARIATION .003[0.08], MEASURED FIRST & LAST POSITIONS ONLY, ALL ROWS.

16. -3 AND -4 SOLDER COMPOSITION AVAILABLE TO EXISTING CUSTOMERS ONLY AS OF REVISION AY.

17. NON-FUNCTIONAL VOIDING IN PLASTIC BODY TO BE AT SAMTEC'S DISCRETION.

18. THESE OPTIONS AVAILABLE AS ASO (APPLICATION SPECIFIC OPTIONS) ONLY. PLEASE CONTACT SAMTEC

FOR MORE INFORMATION.

FIG 1

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

.XX: .01 [.3]

.XXX: .005 [.13]

.XXXX: .0020 [.051]

ANGLES

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733

FAX: 812-948-5047

e-Mail info@SAMTEC.com

code 55322

DESCRIPTION:

DWG. NO.

MATERIAL:

INSULATOR: LCP, COLOR: BLACK

CONTACT : COPPER ALLOY

DO NOT SCALE DRAWING

SHEET SCALE: 2:1

.050 PITCH SOCKET ARRAY ASSEMBLY

SHEET

SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR

F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW

BY:

BRATCHER 05/27/2004

Recommended Resources

Driving circuit diagram of a low-power LED bulb

Practical amplifier circuit f composed of operational amplifier LM386

Wuzhou-Ariston BCD-185 refrigerator circuit

Electronic ballast circuit diagram that automatically opens and closes c

DN35 typical application circuit diagram b

VMOS tube switching regulated power supply application circuit 2

A newbie needs help. What are the sensors that can detect tiny distances?: I want to make a counting method for a rotating pointer (water meter) based on distance detection. What kind of sensor can detect such a small distance between the pointer and the dial? Or do you have...; 52599 Sensor

It is imperative to develop autonomous vehicle network application systems: Expanding the application of automotive electronic control networks 　　As the proportion of automotive electronic products increases, there are more and more electronic components, devices, module , an...; frozenviolet Automotive Electronics

Correct Selection, Replacement and Replenishment of Brake Fluid in ABS System (Part 1): 1. Correct Selection Since the ABS system is more complex than the conventional brake system, special attention should be paid to the following when selecting, replacing and replenishing the brake flu...; frozenviolet Automotive Electronics

FreeRTOS Learning Notes (7) FreeRTOS Software Structure: [i=s]This post was last edited by cruelfox on 2018-10-6 22:38[/i] I started learning FreeRTOS from its official document "Mastering the FreeRTOS Real Time Kernel", using version 9.0.0 for both the cod...; cruelfox MCU

[NXP Rapid IoT Review] + First impressions: [i=s]This post was last edited by anananjjj on 2018-12-26 22:47[/i] The Rapid IoT Prototyping Kit from NXP that I applied for was mailed to me today. It is even smaller than I thought. Here are some p...; anananjjj RF/Wirelessly

An article clarifies the "decoupling" and "grounding" issues in IC amplifiers: Reposted from: [url]https://ez.analog.com/cn/other/f/forum/102715/ic[/url] Those who have encountered similar problems can learn about it~ [align=left] [/align][align=left][b][color=rgb(61, 61, 61)][f...; 电路艺术 ADI Reference Circuit

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components