EEWORLDEEWORLDEEWORLD

Part Number

Search

RTD-1209/H3-R

Description
Analog Circuit
CategoryAnalog mixed-signal IC    The signal circuit   
File Size179KB,4 Pages
ManufacturerRECOM
Download Datasheet Parametric View All

RTD-1209/H3-R Overview

Analog Circuit

RTD-1209/H3-R Parametric

Parameter NameAttribute value
MakerRECOM
package instruction,
Reach Compliance Codeunknown
Features
Unregulated
Converters
Description
1kVDC and 3kVDC Isolation Options
Approved for Medical Applications
Suitable for Automated Assembly
High Power Density
Optional Continuous Short Circuit Protection
Efficiency to 8 5 %
ECONOLINE
DC/DC-Converter
Compared to standard 2 Watt packages, space savings of 80% and 77% respectively are achieved by these RTS & RTD
2 Watts SMD-Miniature DC/DC Converters. They have been specifically designed for applications where board space is
at a premium since these 2 Watt converters have only a slightly larger foot print than conventional 1 Watt converters.
With efficiencies up to 85%, external cooling is not needed, as the full output power is available over the operating
temperature range -40°C to +85°C. All converters have an I/O-Isolation of 1kVDC, or optionally 3kV, making them
suitable for many industrial and medical applications.
Selection Guide
Part
Number
SMD
RTS**-xx3.3
RTS**-xx05
RTS**-xx09
RTS**-xx12
RTS**-xx15
RTS**-xx24
RTD**-xx05
RTD**-xx09
RTD**-xx12
RTD**-xx15
Input
Voltage
(VDC)
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
5, 12, 15, 24
Output
Voltage
(VDC)
3.3
5
9
12
15
24
±5
±9
±12
±15
Output
Current
(mA)
606
400
222
167
133
83
±200
±111
±83
±66
Efficiency
(%)
70-75
80-85
80-85
80-85
80-85
80-85
70-75
75-78
75-83
75-85
2 Watt
SMD
Single
&
Dual Output
(3kV)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
EN-60950-1 Certified
(All Suffixes)
EN-60601-1 Certified
(Suffix H3)
RTD**-xx24 (H)
5, 12, 15, 24
±24
±42
78-85
xx = Input Voltage. Other input and output voltage combinations available on request.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RTS-0505/P, RTD-0505/HP
* add suffix -R for tape&reel packing e.g.
RTS-0505-R
. For more details see Tapes Section.
RTS-RTD
Case and Pinning Options (note restrictions on /H option)
RTS** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
RTD** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
Specifications
(
measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
Output Ripple and Noise (20MHz limited)
Operating Frequency
Efficiency at Full Load
No Load Power Consumption
RTS typ.
RTD typ.
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
±10%
±5%
1.2%/1% of Vin max.
20% max.
15% max.
10% max.
150mVp-p max.
20kHz min. / 50kHz typ. / 85kHz max.
70% min. / 80% typ.
124mW min. / 186mW typ. / 350mW max.
159mW min. / 192mW typ. / 350mW max.
cont.
www.recom-international.com
REV:0/2009
E-39
Refer to Application Notes
Ask a question about the LM35CZ temperature sensor
It's like this. I bought an LM35CZ temperature sensor online a few days ago, and then used simulation to make a circuit with no problems. When I used the dual power supply mode given in the sensor man...
StruggleMySen Sensor
Functions of vent valve and drain valve of magnetic flap level gauge
Generally, when there is too much dirt in the main pipe of the magnetic flap level gauge, the float will be stuck and affect the measurement, and maintenance is required at this time. It is necessary ...
cfybhd Sensor
FatFs transplantation based on SPI for MSP430F5438A microcontroller
[i=s]This post was last edited by fish001 on 2019-3-16 22:05[/i] No matter what program you port, the most important thing is, don’t think you must check the information first, spend a week looking fo...
fish001 Microcontroller MCU
Problem with STM32F767 timer overflow interrupt flag
I wrote a program for timer 4 overflow interrupt. I referred to the development board routine and found that the timing was inaccurate. The program did not determine the timer overflow interrupt flag....
chenbingjy stm32/stm8
Comparison of the advantages of digital cameras and analog cameras in machine vision system design
Machine vision is widely used in many fields such as automatic quality inspection, process control, parameter measurement and automatic assembly. In these systems, the camera is a key component that d...
朗锐智科 Talking
About the external interrupt of HAL library
I have a question after reading the code of external interrupt in HAL library, and I would like to ask netizens to answer it. I only see the configuration of interrupt line in the code, whether it is ...
zhangliyuan EE_FPGA Learning Park

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号