REVISION AP
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1. HIDDEN LINES ARE USED TO SHOW POLARIZATION
FFSD-XX-X-XX.XX-01-X-X-XXX
WHEN USING -N OPTION.
2.
C
REPRESENTS A CRITICAL DIMENSION.
3. FFSD CABLE ASSEMBLIES ARE LEAD FREE.
OPTION
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED
-RW: REVERSE WIRING
FOR SHORTS AND OPENS.
(NOT AVAILABLE WITH -RN1 OR -RN2)
5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V. C
No OF POSITIONS
-D"XX": DAISY CHAIN (MINIMUM 2.00[50.8],
6. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL.
-02 THRU -25
1.00[25.4] INCREMENTS)
7. NOTE DELETED.
(PER ROW)
-R: REVERSED
8. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND
(NOT AVAILABLE WITH -M OR -O)
END ASSEMBLY
PAST THE CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
THICKNESS ON CONSECUTIVE AND LESS THAN 50% OF CABLE THICKNESS
-S: SINGLE END
-RN1: REVERSE POLARIZATION NOTCH
ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR.
-D: DOUBLE END
(NOT AVAILABLE WITH -RW OR -RN2)
9. REFERENCE FFSD-XX-XX-X-N-XXX FOR CONNECTOR ASSEMBLY
-RN2: REVERSE POLARIZATION NOTCH
DIMENSIONS AND ITS REQUIREMENTS.
ASSEMBLY LENGTH
(NOT AVAILABLE WITH -RW OR -RN1)
10. COLORED WIRE MUST MATCH FIRST POSITION INDICATOR
-D"XX", -R, -M & -O OPTION: 2.00[50.8] MINIMUM
-M: MIDDLE REVERSE
ON THE FIRST CONNECTOR FOR ALL OPTIONS WITH THE
ALL OTHER OPTION: 1.00[25.4] MINIMUM
(NOT AVAILABLE WITH -R OR -O)
EXCEPTION OF -RW.
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
11. FOR LENGTHS LESS THAN 12.5", TOLERANCE SHALL BE +/-.125,
LEAD STYLE
-O: OUTSIDE REVERSE
ALL OTHER LENGTHS SHALL BE +/-1%.
(NOT AVAILABLE WITH -R OR -M)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
PLATING OPTIONS
C
-SR: STRAIN RELIEF
- LEAVE BLANK FOR STANDARD, USE C-67-L
(NOT AVAILABLE WITH -O, -M,
XX.XX[XX.X x 25.4]±1%
-S: USE C-67-S
-R, OR -DXX)
(SEE NOTE 8 & 11)
-F: USE C-67-F
(SOLD AS ASSEMBLIES ONLY)
STANDARD POLARIZATION NOTCH
-N: POLARIZATION NOTCH
(NOT AVAILABLE IN -02 THRU -04)
(LEAVE BLANK FOR -02, -03, -04)
.075 1.91
REF
.120 3.05
REF
C
(No OF POS x .050[1.27])
+ .165[4.19]
2
.010 0.25 MAX
CABLE OVERHANG
(SEE NOTE 8)
-N OPTION
RED WIRE TO SIDE
OF FIRST POS INDICATOR
XX.XX[XX.X x 25.4]±1%
(SEE NOTE 8 & 11)
.006 0.15 MAX
C
.200
- .003
5.08
- 0.08
+.006
+0.15
-RN1 OPTION
-N OPTION
-RN2 OPTION
1
.040 1.02
REF
NOTCH DENOTES
FIRST POSITION
(FFSD-10-S-XX.XX-01-X-N SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIG 2
(FFSD-10-D-XX.XX-01-X-N SHOWN)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 1
*
PROPRIETARY NOTE
*
RED WIRE TO OPPOSITE
SIDE OF FIRST POS. INDICATOR
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
(FFSD-10-X-XX.XX-01-X-N-RW SHOWN)
FIG 11
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
INSULATORS: PBT UL94V-0, COLOR: BLACK
CONTACT: BeCu
WIRE: 30 AWG, 7/38, TINNED, STRANDED WITH
GRAY PVC INSULATOR
PLATING: .000010 GOLD OVER .000050 NICKEL
REMAINDER: .000200 REF TIN OVER .000050 NICKEL
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
FFSD-XX-X-XX.XX-01-X-X-XXX
02/15/2008
SHEET
1
OF
4
BY:
T NEWTON
REVISION AP
(FFSD-10-D-XX.XX-01-X-N-RN1 SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIRST POSITION INDICATOR
FIRST CONNECTOR
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
FIG 3
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
OUTSIDE CONNECTOR REVERSED WHEN DAISY CHAINED
MIDDLE CONNECTOR REVERSED WHEN DAISY CHAINED
FIRST POSITION INDICATOR
SECOND CONNECTOR
(FFSD-10-D-XX.XX-01-X-N-DXX-O SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
FIG 4
(FFSD-10-D-XX.XX-01-X-N-DXX-M SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
FIG 5
(FFSD-10-D-XX.XX-01-X-N-RN2 SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIRST CONNECTOR
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
FIRST POSITION INDICATOR
(FFSD-10-D-XX.XX-01-X-N-DXX SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
SECOND CONECTOR
NOTE:
-RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY
( NOT AVAILABLE WITH -R OPTION)
-RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY
(NOT AVAILABLE WITH -R OPTION)
(REVERSE NOTCH NOT AVAILABLE WITH -RW OR ANY
DAISY CHAIN OPTIONS)
FIG 7
BOTH CONNECTORS REVERSED WHEN DAISY CHAINED
(FFSD-10-D-XX.XX-01-X-N-DXX-R SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(NOT AVAILABLE WITH -RN1 OR -RN2 OPTION)
(2.00[50.8] MINIMUM, 1.00[25.4] INCREMENTS)
FIG 6
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
FFSD-XX-X-XX.XX-01-X-X-XXX
02/15/2008
SHEET
2
OF
4
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON
REVISION AP
(2-15 POS -SR ONLY FOR DOUBLE END)
(No OF POS x .050[1.27])
C
+ .315[8.00] REF
XX.XX[XX.X x 25.4] + .4375[11.113]±.125[3.18]
IN-PROCESS 1
4
.039 0.99
.335±.010 8.51±0.25
3
C
(XX.XX[XX.XX x 25.4] .13[3.2]
STRAIN RELIEF OPTION (POS 2-15 ONLY)
(FFSD-10-D-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2-15 POS -SR ONLY FOR DOUBLE END)
IN-PROCESS 2
FIG 9
(XX.XX[XX.XX x 25.4] ± .13[3.2])
C
(16-25 POS -SR ONLY FOR DOUBLE END)
IN-PROCESS 1
XX.XX[XX.XX x 25.4] +.4375[11.113] .125[3.18]
(16-25 POS -SR ONLY FOR DOUBLE END)
XX.XX[XX.XX x 25.4] .13[3.2]
C
IN-PROCESS 2
.0228
+.002
0.58
+0.05
- .000
0.00
DETAIL 'A'
SCALE 8 : 1
(16-25 POS -SR ONLY FOR DOUBLE END)
IN-PROCESS 3
6
'A'
5
STRAIN RELIEF OPTION (POS 16-25 ONLY)
(FFSD-25-D-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG 9, DIFFERENT AS SHOWN)
SCALE 1 : 1
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
FIG 10
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
FFSD-XX-X-XX.XX-01-X-X-XXX
02/15/2008
SHEET
3
OF
4
BY:
T NEWTON
REVISION AP
IN-PROCESS 1
IN-PROCESS 1
(FFSD-XX-S-XX.XX-01-X-N-RW ONLY)
(16-25 POS -SR ONLY FOR SINGLE END)
(XX.XX[XX.XX x 25.4] ± .125[3.18])
XX.XX[XX.XX x 25.4] +.4375[11.113] .125[3.18]
(16-25 POS -SR ONLY FOR SINGLE END)
(2-15 POS -SR ONLY FOR SINGLE END)
IN-PROCESS 2
IN-PROCESS 1
XX.XX[XX.XX x 25.4] .125[3.18]
C
XX.XX[XX.X x 25.4] + .4375[11.113]±.125[3.18]
(2-15 POS -SR ONLY FOR SINGLE END)
IN-PROCESS 2
(16-25 POS -SR ONLY FOR SINGLE END)
IN-PROCESS 3
(XX.XX[XX.XX x 25.4] ± .125[3.18])
C
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
.050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY
FFSD-XX-X-XX.XX-01-X-X-XXX
SHEET
4
OF
4
F:\DWG\MISC\MKTG\FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008
京公网安备 11010802033920号
EEWORLD
