KADG1-8080 SERIES
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
●Super
high flux output and high luminance.
●Designed
for high current operation.
●Low
thermal resistance.
●Silicone
resin with glass lens.
●Compatible
with IR-reflow processes.
●ESD
protection .
●Package
: 500pcs / reel.
●RoHS
compliant.
Applications
Substitution of micro incandescent lamps.
Portable light source.
Signal and symbol luminaire for orientation.
Marker lights (e.g. steps, exit ways, etc).
Decorative and entertainment lighting.
Commercial and residential lighting.
Emergency-vehicle lighting.
Application Note
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
Package Dimensions
grounded.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ3100
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/19/2010
DRAWN: Y.F.Lv
PAGE: 1 OF 9
Flux Characteristics at 350mA Ambient Temperature, T
a
= 25°C
Color
Part No.
Luminous Flux (lm) @ 350mA [1]
Code.
B2
B3
Blue(AlGaInN)
KADG1-8080QB10Z1S
B4
B5
B10
Green(AlGaInN)
KADG1-8080ZG10Z1S
B11
B12
B5
B6
Reddish-Orange(AlGaInP)
KADG1-8080SE28Z1S
B7
B8
B5
B6
Super Bright Yellow (AlGaInP) KADG1-8080SY28Z1S
B7
B8
29
35
35
42
29
35
20
24
35
42
24
29
28
17
20
50
60
70
20
24
20
24
60
70
80
24
29
28
65
Min.
12
14
Max.
14
17
17
Typical Luminous Flux
(lm) [1]
Typ.
Note:
1. Minimum luminous flux performance guaranteed within published operating conditions.Kingbright maintains tolerance of +/-15% on flux.
Optical Characteristics at 350mA Ambient Temperature, T
a
= 25°C
Typical
Temperature
Coefficient of
Dominant
Wavelength
(nm/°C)
Δλ
D
/ΔT
0.10
0.14
0.05
0.06
Typical
Viewing
Angle [3]
(degrees)
2θ1/2
100
°
100
°
100
°
100
°
Dominant Wavelength
[1]
λ
D
Color
Typical
Spectral
Halfwidth [2]
(nm)
Δλ1/2
20
35
30
20
Min.
Blue
Green
Reddish-Orange
Super Bright Yellow
450nm
520nm
619nm
586nm
Typ.
458nm
530nm
625nm
588nm
Max.
465nm
535nm
629nm
594nm
Notes:
1.Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
2.Spectral width at 1/2 of the peak intensity.
3.Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.
SPEC NO: DSAJ3100
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/19/2010
DRAWN: Y.F.Lv
PAGE: 2 OF 9
Electrical Characteristics at 350mA Ambient Temperature, T
a
= 25°C
Typical Temperature
Coefficient of
Forward
Voltage [2]
(mV/°C)
ΔV
f
/ΔT
-3.2
-2.3
-3.2
-3.2
Typical
Thermal
Resistance
(°C/W)
R
th j-slug
9
9
9
9
Color
Forward Voltage V
f
[1]
(V)
Min.
Blue
Green
Reddish-Orange
Super Bright Yellow
2.7
2.8
2.0
2.0
Typ.
3.2
3.3
2.5
2.5
Max.
3.6
3.8
3.0
3.0
Notes:
1.Kingbright maintains a tolerance of +/- 0.1V on forward voltage measurements.
2.Measured between 25 °C < TJ < 110 °C at IF = 350 mA.
Absolute Maximum Ratings
Parameter
DC Forward Current (mA) [1]
Peak Pulsed Forward Current (mA)
Average Forward Current (mA)
Reverse Voltage (V)
ESD Sensitivity
LED Junction Temperature (°C)
Operation Temperature (°C)
Storage Temperature (°C)
Soldering Temperature (°C)
Note:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
Blue/Green/Reddish-Orange/Super Bright Yellow
350
500
350
5
8000V HBM
110
-40 - 100
-40 - 110
260 For 5 Seconds
Moisture Sensitivity
KADG1-8080 LEDs are packaged in airtight and moisture-resistant bags to prevent moisture absorption which may lead to
catastrophic failure in reflow soldering process. Kingbright recommends that the devices must be baked before soldering if
they are removed from the original package, and are exposed to environmental conditions for longer than the durations
(unit: days) defined in the table below. Recommended baking conditions are 24 hours at 80ºC.
Maximum Percent Relative Humidity
Temperature
30%
30°C
25°C
20°C
9
12
17
40%
5
7
9
50%
4
5
7
60%
3
4
6
70%
1
2
2
80%
1
1
2
90%
1
1
1
Storage Conditions
After being removed from the original sealed package, KADG1-8080 LEDs should be stored at a temperature of 25 ºC with a
relative humidity lower than 10%. Under such conditions, storage duration is excluded from the exposure duration as defined
in the Moisture Sensitivity section.
SPEC NO: DSAJ3100
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/19/2010
DRAWN: Y.F.Lv
PAGE: 3 OF 9
Wavelength Characteristics T
a
= 25°C
Light Output Characteristics
SPEC NO: DSAJ3100
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/19/2010
DRAWN: Y.F.Lv
PAGE: 4 OF 9
Forward Current Characteristics, T
a
= 25°C
SPEC NO: DSAJ3100
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/19/2010
DRAWN: Y.F.Lv
PAGE: 5 OF 9
京公网安备 11010802033920号
EEWORLD
