The figure below is a schematic diagram of the clamping circuit. L is the inductor. G is used to control the coil power-on time, and a roughly expected current value is expected. I would like to ask t...
1. How to drive stm32 to connect to FT232?
2. Does stm32 need to write FT232 driver?
3. Does FT232 require a program driver?
4. Is it possible to install the USB driver directly when plugging FT232 in...
After creating a new project, select Copy ADuC702x.s.I added a main.c file myself, which is empty.I tried to compile it and got an error immediately. The error messages are all in ADuC702x.s:But this ...
collect
Comments 0Share
Weibo
QQ
WeChat
LinkedInThe ultimate goal of manufacturers in creating mild hybrid electric vehicles (MHEVs) is to reduce greenhouse gas (GHG) emissions. Mild hybrid electric v...
[i=s]This post was last edited by dcexpert on 2019-6-10 20:06[/i]Before the holiday, I drew a version of STLink V2.1. One reason for making this board is that the STlink interface on Nucleo is miniUSB...
Automation, as a modern technical science field, began to take shape in the mid-1940s. In fact, the history of automatic machinery can be traced back to ancient times. As early as more than 3,000 yea...[Details]
Restart the computer, complete the configuration of LabVIEW 8.2, and then you can start running LabVIEW 8.2. Users can run LabVIEW 8.2 in the following ways.
(1) Run the LabVIEW program through t...[Details]
Dive into the U.S. Food and Drug Administration's (FDA) medical and healthcare guidance on the Internet of Medical Things (IoMT). The healthcare industry’s growing reliance on connected device...[Details]
The PWM speed regulation frequency of the 51 microcontroller mainly realizes PWM output through a timer and an IO port. In a cycle, first let the IO port output a high level for a certain time, and...[Details]
After the acquisition of Silead and the supporting fundraising plan were approved by the China Securities Regulatory Commission, on August 8, GigaDevice released the overall plan for this transaction...[Details]
1. Overview of Gas Turbine Flow Meter Gas turbine flowmeter is mainly used for flow measurement of medium fluids such as air, nitrogen, oxygen, hydrogen, biogas, natural gas, steam, etc. in industria...[Details]
Overview When developing C/C++, we all need to print debugging information. We are used to using the printf function to print debugging information. However, in the Keil C51 environment, since our pr...[Details]
Since Apple released the first generation of iPhone in 2007, sensors that seemed to have nothing to do with mobile phones have gradually become an important part of mobile phone hardware. If you have...[Details]
Support for Microsoft Azure RTOS enables secure embedded IoT development Azure RTOS components are integrated into the Renesas RA Flexible Configuration Package and Renesas Synergy Software Platfor...[Details]
Progma compiler directive in GCC under ARM architecture
Mainly speaking #pragma pack()
1. Why do we need memory alignment?
2. Bare metal code verification of the default alignment ...[Details]
Semiconductor triodes
In addition to being used as amplifiers and switching elements, they can also be made into some two-terminal or three-terminal devices that can be used independently.
...[Details]
Multicore DSP implementations require intelligent power management given the plethora of voltage and current requirements for the core, memory, I/O, and other rails. An important performance benchmar...[Details]
Rethinking East-West Computing: The essence of computing power is to reshape the economic landscape
According to statistics, the carbon dioxide emissions of data centers across the c...[Details]
1. The implementation principle of LED driver:
The conductivity of the transistor is controlled by the high and low levels of the GPC0_3 and GPC0_4 pins, thereby controlling the on and off of ...[Details]