"Learn Circuit Simulation Multisim and Circuit Design Protel Technology from Scratch" is written for readers to quickly master Multisim and Protel, the two most commonly used and popular powerful appl...
At present, the commonly used wireless network standards mainly include the 802.11 standard (including 802.11a, 802.11b and 802.11g) formulated by the American IEEE (Institute of Electrical and Electr...
[i=s]This post was last edited by cruelfox on 2021-4-17 15:49[/i] The Vidonn wristband I scrapped last time has many components on the board, but few GPIOs. I can't use so many external things at the...
33. Does the CLA have access to all memory on the device? The CLA can use specific blocks on the device.CLA Program Memory On Piccolo (2803x and 2806x), this is a 4k x 16 block, single cycle (no wait ...
[backcolor=white][color=#000000] In many wireless IoT devices, such as wearable electronics and battery-powered or self-powered sensors, it is critical to keep power consumption to a minimum. Some of ...
After mounting the chips according to the circuit diagram, the voltage at VCC3V3 is not 3.3V, but 4.6V. After C46 is replaced from 22pF to 330pF, the voltage at VCC3V3 is 3.3V (the required voltage is...