-
Schematic diagram:
The c51 microcontroller program is as follows:
#include reg51.h
#define UCHAR unsigned char
#define UINT unsigned int
UCHAR table = {0x3f,0x06,0x5b,0x4f,0x66,0x6...[Details]
-
In power installation projects, if the RLC series circuit produces parallel resonance, when the series resonance working voltage on both sides of the inductor or capacitor is too high, it will penetr...[Details]
-
1 Introduction
As a type of vacuum microwave amplifier, the klystron has been widely used due to its advantages of high power and high efficiency. The klystron generally requires an...[Details]
-
TheElec has learned that the ongoing negotiations between Samsung Electronics and LG Display on the supply of TV OLED panels are mainly focused on economical OLED panels. Samsung will launch OLED T...[Details]
-
For AVR microprocessors with timer/oscillator pins (TOSC1 and TOSC2), the crystal can be connected directly to these two pins without external capacitors. This oscillator is optimized for 32.768 kHz ...[Details]
-
Anhui Development and Reform Energy No. 577
To the Development and Reform Commission, Economic and Information Commission, Finance Bureau, Housing and Urban-Rural Development Comm...[Details]
-
Why can't infrared cameras see clearly at night?
Q: I use an infrared camera, but when I turn on the infrared camera at night, the pictures I take look like wind blowing and things flying ...[Details]
-
On February 28, one week before the opening of the two sessions, reporters visited Sinopec's energy station to learn about the energy security work done by this energy and chemical company in preparat...[Details]
-
Abstract: Wearable health monitoring system uses wearable biosensors to collect human motion and physiological parameters to achieve the wearer's motion and health management. Wearable health mon...[Details]
-
In the past year, humanoid
robots
have become the focus of attention, and many companies have lined up to launch their own humanoid products. Most of them have a typical humanoid appearance...[Details]
-
According to the Economic Daily, analysts pointed out that judging from the current market situation, global DRAM supply growth will be limited in the first half of next year, supplier inventories wi...[Details]
-
1 Introduction The switching power supply is generally composed of a main power circuit, an auxiliary power supply and a control circuit. The main power circuit is mainly used to supply power to t...[Details]
-
This year, I completed 4 bootloaders during the National Day. I introduced 2 of them before, both of which are USB bootloaders for PIC32MZ. Next, I will introduce 2 USB bootloaders for PIC24. The fir...[Details]
-
1. Why do we need to measure the surface salt density of insulators?
Answer: The significance of measuring the equivalent salt density of insulators is mainly to prevent pollution flashover or pro...[Details]
-
A multimeter is a commonly used measurement tool that can be used to measure parameters such as voltage, current, and resistance. However, for the measurement of temperature sensors, a multimeter m...[Details]
Special Edition for Assessment Centres
京公网安备 11010802033920号
EEWORLD
