Toggle Switch, SPDT, On-off-(on), Horizontal, Solder Lug Terminal, Toggle Bat Actuator, Panel Mount,
Parameter Name | Attribute value |
Maker | ITT |
Reach Compliance Code | unknown |
Actuator angle | 25 deg |
Executor completed | BRIGHT CHROME |
Actuator length | 0.41 inch |
Actuator material | BRASS |
Actuator type | TOGGLE BAT |
body width | 6.858 mm |
body height | 32.131 mm |
Body length or diameter | 12.7 mm |
Casing diameter | 0.25 inch |
Nozzle length | 0.35 inch |
Casing type | 1/4-40 |
center contact material | COPPER ALLOY |
Center contact plating | GOLD OVER NICKEL |
Contact (DC) maximum rated power R load | 0.4VA@20VDC |
Contact function | ON-OFF-(ON) |
Contact resistance | 0.01 mΩ |
contact time | BREAK-BEFORE-MAKE |
Dielectric withstand voltage | 1000VRMS V |
Electrical life | 40000 Cycle(s) |
End contact material | COPPER ALLOY |
End contact plating | GOLD OVER NICKEL |
Shell material | STAINLESS STEEL |
Insulation resistance | 1000000000 Ω |
insulator material | GLASS FILLED NYLON |
Manufacturer's serial number | 7100 |
Installation features | PANEL MOUNT |
Maximum operating temperature | 85 °C |
Minimum operating temperature | -30 °C |
seal | EPOXY |
Solderability | MIL-STD |
surface mount | NO |
Switch action | HORIZONTAL |
switch function | SPDT |
Switch type | TOGGLE SWITCH |
Terminal surface | GOLD/NICKEL |
Terminal length | 0.155 inch |
Terminal material | COPPER ALLOY |
Termination type | SOLDER LUG |
Base Number Matches | 1 |