ATC 100 C Series
Porcelain High RF Power
Multilayer Capacitors
• Case C Size
(.250" x .250")
• High Q
• Low ESR/ESL
• High RF Power
• Capacitance Range
1 pF to 2700 pF
• Ultra-Stable Performance
• High RF Current/Voltage
• High Reliability
• Available with
• Extended WVDC
Encapsulation Option* up to 3600 VDC
ATC, the industry leader, offers new improved ESR/ESL performance
for the 100 C Series RF Capacitors. This high Q multilayer capacitor
is ultra-stable under high RF current and voltage applications. High
density Porcelain construction provides a rugged, hermetic package.
ATC offers an encapsulation option for applications requiring extend-
ed protection against arc-over and corona.
Typical functional applications: Bypass, Coupling, Tuning, Impedance
Matching and DC Blocking.
Typical circuit applications: VHF/UHF RF Power Amplifiers, Antenna
Tuning, Plasma Chambers and Medical (MRI coils).
*For leaded styles only.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 10,000 (1.0 pF to 1000 pF) @ 1 MHz.
Greater than 10,000 (1100 pF to 2700 pF) @ 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
+90 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
1 pF to 2700 pF:
10
5
Megohms min. @ +25°C at rated WVDC.
10
4
Megohms min. @ +125°C at rated WVDC.
Max. test voltage is 500 VDC.
ENVIRONMENTAL TESTS
ATC 100 C Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681 and
MIL-PRF-123.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, p 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
RETRACE:
Less than ±(0.02% or 0.02 pF), whichever is greater.
AGING EFFECTS:
None
PIEZOELECTRIC EFFECTS:
None
(No capacitance variation with voltage or pressure).
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
CAPACITANCE DRIFT:
±(0.02% or 0.02 pF), whichever is greater.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
TERMINAL STRENGTH:
Terminations for chips and pellets
withstand a pull of 10 lbs. min., 20 lbs. typical, for 5 seconds in direc-
tion perpendicular to the termination surface of the capacitor. Test per
MIL-STD-202, method 211.
ATC # 001-808 Rev. K 3/10
ATC 100 C Capacitance Values
CAP. CAP.
CODE (pF)
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
TOL.
RATED WVDC CAP. CAP.
STD. EXT. CODE- (pF)
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
330
360
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
TOL.
RATED WVDC CAP. CAP.
STD. EXT. CODE (pF)
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
TOL.
RATED WVDC CAP. CAP.
STD. EXT. CODE (pF)
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
242
272
TOL.
RATED WVDC
STD. EXT.
300
330
360
1500
390
430
470
510
560
620
680
F, G, J
750
K, M 1000
820
910
1000
1100
1200
1500
500
1800
2200
2400
300
2700
EXTENDED VOLTAGE
EXTENDED VOLTAGE
3600
EXTENDED
B, C, D 2500
3600
2500
3600
F, G, J 2500
K, M
1500
EXTENDED VOLTAGE
EXTENDED
F, G, J
K, M
EXTENDED VOLTAGE
3000
800
500
VRMS = 0.707 x WVDC
• SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
CAPACITANCE TOLERANCE
B
C
D
F
G
K
M
J
Code
Tol.
±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20%
ATC PART NUMBER CODE
ATC100 C
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits
of capacitance in picofarads except for decimal values.
Capacitance Tolerance
10 0 J W 2500 X C
Packaging
C - ATC Matrix Tray (Standard)
T - Tape and Reel, 500 pc. qty.
I - Special Packaging. Consult Factory
Laser Marking
WVDC
Termination Code
The above part number refers to a 100 C Series (case size C) 10 pF capacitor,
J tolerance (±5%), 2500 WVDC, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and ATC Waffle-packaging.
ATC accepts orders for our parts using designations
with
or
without
the
“ATC” prefix. Both methods of defining the part number are equivalent, i.e.,
part numbers referenced with the “ATC” prefix are interchangeable to parts
referenced without the “ATC” prefix. Customers are free to use either in
specifying or procuring parts from American Technical Ceramics.
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
A M E R I C A N
2
ATC North America
+1-631-622-4700 • sales@atceramics.com
T E C H N I C A L
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
C E R A M I C S
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
w
w
w
.
a
t
c
e
r
a
m
i
c
s
.
c
o
m
EXTENDED
VOLTAGE
VOLTAGE
EXT.
B, C,
D
VOLTAGE
2000
VOLT.
ATC 100 C Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
OUTLINES
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (MM)
LENGTH
(L)
.230
+.020 -.010
(5.84
+0.51
-0.25)
.230
+.025 -.010
(5.84
+0.64
-0.25)
.230
+.020 -.010
(5.84
+0.51
-0.25)
.230
+.020 -.010
(5.84
+0.51
-0.25)
TL
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
OVERLAP
(Y)
WIDTH
(W)
THICKNESS
(T)
MATERIAL
Y
100C
W
W
C
Solder Plate
Y
Tin /Lead, Solder Plated over
Nickel Barrier Termination
L
T
100C
P
W
C
Pellet
Y
L
T
Heavy Tin/Lead Coated,
over Nickel Barrier Termination
.040 (1.02)
max.
100C
T
C
Solderable Nickel
Barrier
Y
W
L
T
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
100C
CA
W
RoHS Compliant
.145 (3.68)
max. for
capacitance
values
≤
680 pF;
.165 (4.19)
max. for
capacitance
values
> 680 pF.
Gold Plated over
Nickel Barrier Termination
C
Gold Chip
L
T
100C
MS
C
WL
LL
W
L
T
.250 ±.015
(6.35 ±0.38)
High Purity
Silver Leads
LL = .500 (12.7) min.
WL = .240 ±.005
(6.10 ±.127)
TL = .004 ±.001
(.102 ±.025)
Leads are Attached with
High Temperature Solder.
Microstrip
C
100C
AR
Axial Ribbon
WL
TL
LL
W
L
T
LL
100C
AW
C
Axial Wire
L
W
•
T
.245 ±.025
(6.22 ±0.64)
N/A
Silver-plated Copper Leads
LL = 2.25 (57.15) min.
Dia. = .032 ±.002 (0.81 ±0.05)
LL
WL
W
TL
T
Silver Leads
LL = .500 (12.7) min.
WL =
See below
TL = .004 ±.001 (.102 ±.025)
100C
VA
C
Vertical Axial Ribbon
**
L
LL
100C
RW
C
Radial Wire
L
T
W
Silver-plated Copper Leads
LL = 1.0 (25.4) min.
Dia. = .032 ±.002 (0.81 ±0.05)
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are
RoHS
compliant.
** WL = .110 (2.79) for capacitance values
≤
680 pF; WL = .130 (3.30) for capacitance values > 680 pF
A M E R I C A N
3
ATC North America
+1-631-622-4700 • sales@atceramics.com
T E C H N I C A L
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
C E R A M I C S
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
w
w
w
.
a
t
c
e
r
a
m
i
c
s
.
c
o
m
ATC 100 C Capacitors: Non-Magnetic Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
OUTLINES
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm)
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
OVERLAP
(Y)
MATERIALS
Y
100C
WN
C
Non-Mag
Solder Plate
W
L
T
.230
+.025 -.010
(5.84
+0.64
-0.25)
Tin/Lead, Solder Plated over
Non-Magnetic Barrier
Termination
Y
100C
PN
C
Non-Mag
Pellet
W
L
T
.230
+.035 -.010
(5.84
+0.89
-0.25)
.250 ±.015
(6.35 ±0.38)
.145 (3.68)
max. for
capacitance
values
≤
680 pF;
.165 (4.19)
max. for
capacitance
values
> 680 pF.
Heavy Tin/Lead Coated, over
Non-Magnetic Barrier
Termination
.040 (1.02)
max.
Y
100C
TN
C
Non-Mag
Solderable Barrier
W
L
T
.230
+.025 -.010
(5.84
+0.64
-0.25)
TL
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
High Purity Silver Leads
.245 ±.025
(6.22 ±0.64)
LL = .500 (12.7) min.
WL = .240 ±.005 (6.10 ±.127)
TL = .004 ±.001 (.102 ±.025)
Leads are Attached with
High Temperature Solder.
LL
100C
MN
C
Non-Mag
Microstrip
WL
L
W
T
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are
RoHS
compliant.
Suggested Mounting Pad Dimensions
A M E R I C A N
4
ATC North America
+1-631-622-4700 • sales@atceramics.com
T E C H N I C A L
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
C E R A M I C S
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
w
w
w
.
a
t
c
e
r
a
m
i
c
s
.
c
o
m
ATC 100 C Performance Data
ESR VS. CAPACITANCE
ATC SERIES 100, CASE C
1
100000
Q VS. CAPACITANCE
ATC SERIES 100, CASE C
ESR (Ohms)
0.1
500 MHz
10000
30 MHz
150 MHz
0.01
30 MHz
1000
150 MHz
100
500 MHz
(Typical)
0.001
1
10
100
1000
10000
10
1
10
100
1000
Q
(Typical)
10000
CAPACITANCE (pF)
CAPACITANCE (pF)
SERIES RESONANCE VS. CAPACITANCE
ATC SERIES 100, CASE C
10000
100
CURRENT RATING VS. CAPACITANCE
ATC SERIES 100,
,
CASE C
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
15°C/W. A power dissipation of 4W will result
in a case temperature of 125°C.
RMS CURRENT (Amps)
)
( p
FREQUENCY (MHz)
1000
10
150 MHz
500 MHz
30 MHz
1
100
10 MHz
(Typical)
10
1
10
100
1000
10000
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
0.1
1
10
100
1000
10000
CAPACITANCE (pF)
CAPACITANCE (pF)
CURRENT RATING VS. CAPACITANCE
ATC SERIES 100, CASE C, EXTENDED VOLTAGE
,
,
100
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
15°C/W. A power dissipation of 4W will result
in a case temperature of 125°C.
CAPACITANCE CHANGE VS. TEMPERATURE
ATC SERIES 100, CASE C
1.5
ATC SERIES 100, CASE C
TC= +90
±
30 PPM/°C
% CHANGE IN CAPACITANCE
RMS CURRENT (Amps)
1
10
150 MHz
500 MHz
30 MHz
10 MHz
0.5
0
1
-0.5
0.1
1
10
100
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1000
10000
-1
-55
-35
-15
5
25
45
65
85
105
125
CAPACITANCE (pF)
TEMPERATURE (Degrees C)
A M E R I C A N
5
ATC North America
+1-631-622-4700 • sales@atceramics.com
T E C H N I C A L
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
C E R A M I C S
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
w
w
w
.
a
t
c
e
r
a
m
i
c
s
.
c
o
m
stm32/stm8
京公网安备 11010802033920号
EEWORLD
