Data Sheet
BatMod
TM
Battery Charger Current Source Modules
Features
•
•
•
•
•
•
•
•
•
•
•
RoHS compliant (VE versions)
Programmable output current
Booster versions available
Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7 mm)
UL, CSA, TÜV
Compatible with all major battery types
Inputs: 48, 150, 300 Vdc
Outputs: 12, 24, 48 Vdc Nominal
Analog current monitor
Analog overvoltage adjust
CE Marked
Product Highlights
The BatMod combines Vicor’s industry standard
package with the flexibility of a power converter
whose output voltage and output current may be
independently set. BatMod’s allow the user to
independently program a constant output current
and a maximum float voltage. The float voltage is
the point at which the BatMod transitions from
constant current to constant voltage. These
features make the BatMod an ideal candidate for
battery charging and other applications which
require a controlled current source.
The BatMod is also available in booster
versions that enable the designer to create systems
capable of multiple kilowatts of
output power.
With its wide range of input options, the BatMod
is compatible with all major
battery types. This new current output
module finds application in systems where easily
programmable current is of primary importance.
Consult factory for availability of input/output volt-
age ranges not shown.
Packaging Options
SlimMods™, high power density, flangeless
packages and FinMods™, featuring integral
finned heatsinks.
SlimMod:
Option suffix:
- S
Example:
VX - XXX - XU - BM
- S
FinMod:
Option suffix:
- F1, - F2, - F3
and
- F4
Examples:
VX - XXX - XU -BM -F1, 0.25"H longitudinal fin
VX - XXX - XU -BM -F2, 0.5"H longitudinal fin
VX - XXX - XU -BM -F3, 0.25"H transverse fin
VX - XXX - XU -BM -F4, 0.5"H transverse
fin
Specifications
(typical TBP = 25°C, nominal line, 75% load, unless otherwise specified)
Parameter
Nominal input voltage
Output current
(Refer to safe operating curves on page 2)
Rating
48 Vdc, 150 Vdc,
300 Vdc
0 – 14.5 A
0 – 7.25 A
0 – 3.6 A
1–5V
1–5V
0 – 2.5 V
15 V, 30 V, 60 V +/-1%
V-Mode: 300 µsec typ.
I-Mode: 250 µsec typ.
3,000 V
RMS
500 V
RMS
1,500 V
RMS
Notes
42 – 60 V, 100 – 200 V,
200 – 400 V
12 V battery system
24 V battery system
48 V battery system
Zero to max. current
Zero to full load
Zero to FS output
12 V, 24 V, 48 V
Output Respectively
V
NOM
for 50 – 100%
load changes
Current control input
Current monitor output
Voltage control input
Output voltage setpoint
Trimmable +10%, -25%
Dynamic characteristics
Dielectric withstand
Input to output
Output to baseplate
Input to baseplate
Part Numbering
(typical model: input 300 Vdc, output 12 Vdc at 200 W)
V
I
*
-
2 6 1
-
E U
-
B M
*
E
= RoHS
Module
2
= Driver
B=
Booster
Input Voltage
Nominal
Range
3
= 48 V 42 – 60 V
5
= 150 V 100 – 200 V
6
= 300 V 200 – 400 V
Output Voltage
Nominal
Range
1
= 12 V
11.25 – 16.5 V
3
= 24 V
1
22.5 – 33.0 V
4
= 48 V
45.0 – 66.0 V
1
Product Grade Temperatures (°C)
Grade Operating
Storage
E
=
-
10 to + 85
-
20 to + 100
C
=
-
25 to + 85
-
40 to + 100
I
=
-
40 to + 85
-
55 to + 100
M
=
-
55 to + 85
-
65 to + 100
Available in 300 V input only
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
BatMod Battery Charger Current Source Modules
Rev. 1.5
Page 1 of 3
Set your site on VICOR at www.vicorpower.com
MECHANICAL DIAGRAM
.50
(12,7)
.30±.015
(7,6)±(0,38)
1.80
(45,7)
4.60
(116,8)
3.60
(91,4)
Standard
0.080 (2,0) Dia (2) places
Solder plate over copper alloy
RoHS
0.080 (2,0) Dia (2) places
Matte tin over copper alloy
Pin #
1
2
3
4
5
6*
7*
8*
9
Function
+In
Gate In
Gate Out
-In
+Out
V
TRIM
I
TRIM
I
MON
-Out
4
2.10
(53,3)
3
9
BatMod
2
1
8
7
6
5
1.40
1.00 (35,6)
.70 (25,4)
.40 (17,8)
(10,2)
.35±.015
(8,9)±(0,38)
.15
(3,8)
FULL R
.15
(3,8)
Product ID
this surface
Standard
* Do not connect on booster modules
RoHS
0.040 (1,0) Dia (7) places
Matte tin over copper alloy
2.40
(61,0)
1.75
(44,5)
0.040 (1,0) Dia (7) places
Solder plate over copper alloy
4.20
(106,7)
.22
(5,6) MIN
.30
(7,6) Min
.50
(12,7)
.12
(3,0)
+.030 (0,76)
-.000 (0)
.01
Aluminum Base
Safe Operating Conditions
18
16.5 V
Power Current
High Program Exceeded Exceeded
Exceeded
36
32
28
24
20
16
12
8
4
16
14
12
Safe Operating Area
Maximum
33.0 V
Voltage
Setpoint
Power Current
High Program Exceeded Exceeded
Exceeded
72
64
56
48
40
32
Maximum
66.0 V
Voltage
Setpoint
High Program
Exceeded
Current
Power
Exceeded Exceeded
Maximum
Voltage
Setpoint
13.8 V
Volts
Minimum
22.5 V
Voltage
Setpoint
Minimum
13.8 V*
Operating
Voltage
Safe Operating Area
27.6 V
Volts
Minimum
45.0 V
Voltage
Setpoint
Safe Operating Area
55.2 V
Minimum
Voltage
Setpoint
Minimum
Operating
Voltage
11.25 V
Volts
10
8
6
4
2
2
4
6
6.9 V*
Minimum
27.6 V*
Operating
24
Voltage
16
8
1
2
3
4 5
Amps
6
7
8
7.25 A
8 10 12 14 16
Amps
14.5 A
0.5 1 1.5 2 2.5 3 3.5 4
Amps
3.6 A
48 V Battery System
12 V Battery System
*Maximum recommended battery discharge.
24 V Battery System
Typical Applications
+IN
DC Input
GATE
IN
GATE
OUT
–In
BatMod
+Out
V
TRIM
I
TRIM
I
MON
–Out
+
External
Control
Functions
12 – 48 V
Battery
–
DC Input
+IN
GATE
IN
GATE
OUT
–IN
BatMod
+OUT
V
TRIM
I
TRIM
I
MON
–OUT
+
External
Control
Functions
Load
–
Figure 1
—
DC Input Battery Charger
Figure 2
—
DC Input Programmable Current Source
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
BatMod Battery Charger Current Source Modules
Rev. 1.5
Page 2 of 3
Set your site on VICOR at www.vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or
maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original
purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned
without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the
product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed
for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function,
or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it con-
vey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its compo-
nents in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and
Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor
against all damages.
Vicor s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or
malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available
upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
BatMod Battery Charger Current Source Modules
Rev. 1.5
8/07
Set your site on VICOR at www.vicorpower.com
京公网安备 11010802033920号
EEWORLD
