5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Product Description
MtronPTI’s M611x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (to ±0.3 ppm) over temperature and time. Specially processed crystals enable the M611x to
achieve consistent long-term stability and minimal frequency shift after reflow. Our processing also enables us to achieve
excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M611x ideal for those design
engineers working on all types of systems as the reference timing source.
Product Applications
The M611x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMax base stations (see Fig 2.), point to point/multi-point radios, medical equipment, frequency synthesis, fre-
quency translation and land mobile radio. Standard output for the M611x series is HCMOS compatible or clipped sinewave
and draws as little as 1.5 mA with a 3.3 volt supply at 13 MHz. This low power consumption provides an advantage over
similarly specified ovenized oscillators for power-sensitive applications. The M611x series offers ±9.2 ppm minimum pull
range with excellent tuning linearity performance for critical PLL applications. This series is available in frequencies from 8
to 52 MHz, and is offered in a ceramic surface mount platform with industry standard 5 x 7 mm footprint.
Product Ordering Information
M6110Sxxx, M6111Sxxx & M6112Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 9-11-08
M611x Series
Performance Characteristics
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M611x Series
Phase Noise Plot
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Output Waveform
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M611x Series
Product Dimension & Pinout Information
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Part Markings:
Line 1: Indicates part family,
year, month of production
Line 2: Indicates frequency
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M611x Series
Handling Information
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVTCXO
Although protection circuitry has been designed into the M611x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-
wide standard has been adopted for the CDM, a standard HBM (resistance = 1500
Ω,
capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Indicates part family, year, month of production
Line 2: Indicates frequency
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Mr. Gaosu's original article | Wang HuidongThe senior brother often said that in the board factory, drilling is the soul of the circuit board, and the via is the soul of the soul. There are many stori...
The TAS5805M stereo Class-D amplifier is a high-efficiency, stereo, closed-loop Class-D amplifier that provides a cost-effective digital input solution with low power consumption and sound enhancement...
[i=s]This post was last edited by hehung on 2022-2-11 19:33[/i]For previous posts, please refer to:
【GD32L233C-START Review】1. Unboxing
[GD32L233C-START Review] 2. Create a new project step by step
[G...
[p=24, null, left][color=rgb(51, 51, 51)][font=arial]The first 5G specifications were ratified late last year, and 5GNR will bring super-fast mobile internet by taking advantage of new spectrum. We ex...
[i=s] This post was last edited by qwqwqw2088 on 2018-11-19 09:34 [/i] [b]Question[/b]: I want to use tps5430 to make a switching power supply with adjustable output, the output voltage range is 3~8V,...
PCB Design
京公网安备 11010802033920号
EEWORLD
