HIGH VOLTAGE AND HIGH VALUE RESISTORS
RESISTORS CAPACITORS COILS DELAY LINES
UHV SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
Resistance values up to 200TΩ (2x10
14
Ω),
tolerances to 1%!
Voltage rating to 14KV. Pulse voltage to 50KV avail.
Low noise & voltage coefficient
Industry’s best TCR, as low as ±25ppm/°C
World’s highest resistance range!
RCD Type UHV resistors are suited for all high value applications
from general purpose bleed chains to highest reliability X-ray
systems and TWT amplifiers. RCD’s exclusive complex oxide
film features state-of-the-art performance and extended life
stability. The unique molecular structure of the resistive element
offers exceptional insensitivity to high voltage and thermal shock.
The protective insulation provides a high dielectric voltage, and
insulation resistance. Series UHV3 is hermetically sealed in a
glass or ceramic case, minimizing the effects of moisture or
contamination.
SPECIAL MODIFICATIONS
Screw terminations available
Resistance tolerances to ±0.2%, matching to 0.1%
Voltage or resistance ratios up to 1000
:
1±1.0%
Increased power, voltage, and operating frequency levels
DERATING
100
% OF RATED POWER
|←
1.25 [32] Min.*
→| ←
←
*UHV3=1 [25.4] Min.
L
→|
→
↓
D
↑
.041 [1.04] Max.
↓
↑
80
60
40
20
0
20
40
UHV1 & 2
RCD Type
UHV3
60
80
100
AMBIENT TEMPERATURE (°C)
120
140
L (Max.)
1.102 [28.0]
1.875 [47.6]
2.00 [50.8]
RESISTANCE RANGE**
2%
1K to 100M
100
Ω
to 100M
5Ω to 1G
1.1G to 10G
2M to 50G
1K to 100M
100
Ω
to 100M
100K to 1G
1.1G to 50G
2M to 100G
100M to 1G
1G to 1T
1T to 10T
D
.315 ±.040 [8.0±1]
.315 ±.040 [8.0±1]
.264 [6.7] Max.
UHV1
UHV2
UHV3
RCD
TYPE
Wattage
@ 25°C
Working
Voltage*
UHV1
1.0W
4000V
UHV2
2.0W
14,000V
UHV3
1.0W
1000V
Avail. TCR
(ppm/°C)
25
50
100
250
-2000
25
50
100
250
-2000
-2000
-2500
-3500
1%
1K to 100M
100
Ω
to 100M
10
Ω
to 1G
1.1G to 10G
2M to 10G
1K to 100M
100
Ω
to 100M
100K to 1G
1.1G to 50G
2M to 50G
100M to 1G
1G to 1T
1T to 5T
5% , 10%
1K to 100M
100
Ω
to 100M
5Ω to 1G
1.1G to 10G
2M to 100G
1K to 100M
100
Ω
to 100M
100K to 1G
1.1G to 50G
2M to 150G
100M to 1G
1G to 1T
1T to 200T
* Maximum DC or AC
RMS
working voltage determined by E = PR below the critical resistance value. Voltage rating is doubled in warm oil. Increased voltage ratings available. **increased range available.
PERFORMANCE CHARACTERISTICS
1
Temperature Range
Voltage Coefficient
2
Insulation Resistance (500V)
Load Life (1000 hours, typ.)
Shelf Life (12 months, typ.)
Noise (per freq. decade, typ.)
2
APPLICATION NOTES
1) Due to possible surface condensation, high voltages should not
be applied in conditions of high humidity. The end caps of UHV1&2
are uninsulated and need to be mounted an adequate distance
from conductors to ensure adequate isolation voltage.
2) Type UHV3 is coated with silicone to reduce condensation on the
glass case and minimize shunt resistance. The coating must not be
damaged or subjected to solvents; handle by terminations. UHV3
>100G are supplied with a guard band to minimize leakage current.
3) Resistance measurements on values over 1 Meg are made at 100V.
4) Resistors are available with screw terminations & tapped end caps to
provide virtually any voltage or resistance value by combining in series.
UHV1&2 = -55°C to +150°C
UHV3 = -40°C to +100°C
1 - 20ppm typ. UHV1 & UHV2
10 to 80ppm UHV3
1 0
13
Ω
0.5%
0.5%
2.0
µ
V/ V
1
Characteristics are typical for resistance range up to 1GΩ , consult factory concerning higher values
Measured between 100V and 500V on values above 100M (tighter VC’s available)
RESISTANCE CODE
Resistance Value
1K
Ω
1M
Ω
10M
Ω
100M
Ω
1G
Ω
10G
Ω
100G
Ω
1T
Ω
10T
Ω
100T
Ω
P/N DESIGNATION:
Scientific
Notation
1x10
3
Ω
1x10
6
Ω
1x10
7
Ω
1x10
8
Ω
1x10
9
Ω
1x10
10
Ω
1x10
11
Ω
1x10
12
Ω
1x10
13
Ω
1x10
14
Ω
Resis. Code
1% 2%-10%
1001
1004
1005
1006
1G00
10G0
100G
1T00
10T0
100T
102
105
106
107
1G0
10G
100G
1T0
10T
100T
UHV3
- 1T50 - F B 101 W
RCD Type
Option Codes
assigned by RCD (leave blank if std)
Resis. Code 1% Tol:
3 signif. figures & multiplier (1001=1KΩ,
1004= 1MΩ, 1006=100MΩ, 1G00= 1GΩ, 1T50 =1.5T, etc.)
Resis. Code 2% - 10%:
2 signif. figures & multiplier (105= 1MΩ,
107=100M, 1G5= 1.5GΩ, 15T=15TΩ). Refer to Resis. Code table
Tolerance Code:
K=10%, J=5%, G=2%, F=1%
Packaging:
B =Bulk, T= Tape & Reel
Temp. Coefficient (PPM/°C):
25=25ppm, 50=50ppm, 101=100ppm,
102=1000ppm, 202=2000ppm, 252=2500ppm, 352=3500ppm
Termination:
W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc,
520 E.Industrial Park Dr, Manchester, NH, USA 03109
rcdcomponents.com
Tel: 603
-
669
-
0054 Fax: 603
-
669
-
5455 Email:sales@rcdcomponents.com
FA061B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
72
京公网安备 11010802033920号
EEWORLD
