V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062
www.v-infinity.com
1-866-372-1258
2/3
VBWQ10 Series DC-DC Converters
Rev. 06-2006
Input
Input Voltage Range
Input Filter Type
24V
48V
9-36V
18-72V
PI Type
Output
Voltage
Voltage
Voltage
Voltage
Accuracy Single Output
Accuracy Dual + Output
Accuracy Dual - Output
Balence Dual Output at full load
±1.0%
±1.0%
±1.0%
±1.0%
max.
max.
max.
max.
Transient Response Single 25% Step Load Change
Dual FL-1/2 ±1% Error Band
Ripple & Noise
20MHz BW,
Temperature Coefficient
Short Circuit Protection
Line Regulation
1
Single/Dual Output
2
Load Regulation
Single/Dual Output
<500µ sec.
<500µ sec.
75mV p-p., max
±0.02%/°C
Continuous
±0.2% max
±1.0% max
General Specifications
Efficiency
Isolation Voltage
Isolation Resistance
Switching Frequency
Operating Temperature Range
Case Temperature
Cooling
Storage Temperature Range
EMI/RFI
Dimensions
Case Material
see table
500VDC min.
10
9
ohms min
300KHz, Type
-25°C to +71°C
100°C max.
Free-Air Convection
-40°C to +100°C
Six sided Continuous Shield
2.0x1.0x0.4 inches
(50.8x25.4x10.2mm)
Black Coated Copper with
Non-Conductive Base
NOTES:
1. Measured from high line to low line
2. Measured from full load to 1/4 load
V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062
www.v-infinity.com
1-866-372-1258
3/3
VBWQ10 Series DC-DC Converters
Rev. 06-2006
V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to ver-
ify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-
Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered
outside of standard product warranty.
V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062