REVISION AP
DO NOT
SCALE FROM
THIS PRINT
NOTES:
SQW-1XX-01-XXX-D-VS-XX-XXX
POLARIZATION OPTION
-XXX: INDICATES POSITION POLARIZED
(USE PK-07-N, SEE FIG 2, SHT 2)
No OF POSITIONS
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. POSITIONS -04 THRU -50 ARE TO BE TUBED.
-02 THRU -50
(PER ROW)
3. POSITIONS 02 & 03 ARE TO BE LAYERED PACKAGED.
4. MAXIMUM CUT FLASH: .010[.25].
LEAD STYLE
5. STAKED ALIGNMENT PIN USED AT SAMTECS DISCRETION.
-01
6. MEASURE THE HEIGHT FROM THE EDGE, NOT THE BREAK OFF.
PLATING SPECIFICATION
7. MEASURED AT BEND RADIUS, NOT END OF PIN.
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
MATTE TIN ON TAIL
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
MATTE TIN ON TAIL
ASSEMBLIES WITH THE -LC OPTION.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
9. MINIMUM PUSHOUT FORCE: .5 LB.
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA
10. NOTE DELETED.
C
((No OF POS x .07874 [2.000]) + .0117 [.297])
TIN/LEAD (93/7+/-5%) TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
OPTION
-A: STAKED & MOLDED IN ALIGNMENT PIN
(5 POS MIN) (USE SM-A8H, SEE FIG 3, SHT 2)
-LC: LOCKING CLIP (5 POS MIN)
(USE LC-07-TM, SEE FIG 4, SHT 2 & NOTE 8)
-P: PICK & PLACE PAD (4 POS MIN)
(USE LMP-03, SEE FIG 6, SHT 2)
-TR: TAPE & REEL
(AVAILABLE POS 4 THRU 28)
-K: POLYAMIDE FILM PAD (4 POS MIN)
(USE K-DOT-.167-.281-.005, SEE FIG 7, SHT 2)
TAIL STYLE
-VS: VERTICAL
ROW SPECIFICATION
-D: DOUBLE (USE SQW-XX-D)
.010 [.25]
(No OF POS x .07874 [2.000]) - .07874 [2.000] REF
02
.157 4.00
REF
.07874 2.0000
REF
C
.090 2.29
2 MAX SWAY
(EITHER DIRECTION)
.064 1.61
REF
01
IN-PROCESS
SQW-XX-D
.203 5.16
REF
90°
+4°
- 0°
.250 6.35
REF
.050 1.27
(SEE NOTE 7)
C
SEE TABLE 1
2 MAX SWAY
(EITHER DIRECTION)
.0197 0.500 REF (TYP)
.034 0.85 REF
.186 4.72 REF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.015 0.38
REF
.014 0.36 REF
C-97-01-XXX
FIG 1
SQW-110-01-XXX-D-VS
SHOWN
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
2MM SOCKETS TRIP ASSEMBLY
SQW-1XX-01-XXX-D-VS-XX-XXX
DEAN P
04/22/1997
SHEET
1
OF
3
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
BY:
REVISION AP
14
02
01
FIG 2
POLARIZATION OPTION LOCATION
INSERT PK-07-N INTO SPECIFIED
POSITION AND BREAK OFF TAB
SQW-110-01-XXX-D-VS-014 SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
C
.056 1.42 REF
{(No OF POS x .07874 [2.000])
- .1575 [4.000]} .002 [.51]
.050 1.27
-LC: LOCKING CLIP
(5 POS MIN)
SQW-110-01-XXX-D-VS-LC
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 4
LC-07-TM
.010 0.25 REF
.035 0.89
(SEE NOTE 6)
.0350 0.889
REF
-A: STAKED ALIGNMENT PIN
(5 POS MIN)
SQW-110-01-XXX-D-VS-A
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 3
SM-A8H
.0430 1.092
REF
{(No OF POS x .07874 [2.000])
- .1575 [4.000]} .002 [.51]
C
-A: MOLDED ALIGNMENT PIN
(5 POS MIN)
SQW-110-01-XXX-D-VS-A
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FIG 5
.005±.020 0.13±0.51
"R"(SEE NOTE)
{(No OF POS x .07874 [2.000])
+ .0117[.297]}/2} - .1125 [2.858] .020 [.51]
.202 5.13 REF
"S"(SEE NOTE)
.305 7.75
C
L
.225 5.72 REF
C
L
.1673±.0050 4.250±0.127
C
L
POLYAMIDE FILM PAD
NOTE:
(4 POS MIN)
"R" = USED MEASURED DIMENSION (REF)
SQW-110-01-XXX-D-VS-K
SHOWN
"S" = {("R" - .1673 [4.25]) / 2}±.020 [.51]
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
C
L
FIG 7
.308 7.82
-P: PICK & PLACE PAD
(4 POS MIN)
SQW-110-01-XXX-D-VS-P
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
FIG 6
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DO NOT SCALE DRAWING
DESCRIPTION:
DWG. NO.
2MM SOCKETS TRIP ASSEMBLY
SHEET SCALE: 4:1
SQW-1XX-01-XXX-D-VS-XX-XXX
DEAN P
04/22/1997
SHEET
2
OF
3
BY:
REVISION AP
LOOSE END OF REEL
POSITION 1
LABEL
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
PARTS TO COME OFF REEL AS SHOWN
WITH POCKETS FACING UP
UNWINDING DIRECTION
TAPE & REEL VIEW
REEL
PT-1-24-03-09
TP-09
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
TUBE VIEW
DO NOT SCALE DRAWING
DESCRIPTION:
DWG. NO.
2MM SOCKETS TRIP ASSEMBLY
SHEET SCALE: 4:1
SQW-1XX-01-XXX-D-VS-XX-XXX
DEAN P
04/22/1997
SHEET
3
OF
3
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
BY:
京公网安备 11010802033920号
EEWORLD
