1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modi cation.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Asia:
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Let me share an audio problem I encountered in a real project.In the design of embedded products, robots, etc., audio amplifier design is sometimes indispensable. We don’t have high requirements for a...
1. Environment Construction
The difficulty of deploying the ESP32 series development environment has always been criticized. The first thing to be criticized is the various deceptive tutorials on the ...
In the last issue, we tested the DHT11 temperature and humidity sensor on the expansion board. This time, we are using the P98132 chip above to drive the RGB light.Let's take a look at the schematic d...
Working frequency: the resonant frequency of the piezoelectric chip. The longer the wavelength, the smaller the frequency, the greater the detection distance, but the accuracy will be reduced. Sensit...
How to identify the wake-up signal sent by the host when using UART to simulate LIN (the wake-up signal sent by the host is a low level signal that lasts for 250us to 5ms, and the slave uses 150us as ...
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
