4-Pin Red-Orange LED Lamp
(7.6 mm)
OVFSQ4C8
x
x
x
x
x
Packaged in tubes
Compatible with automatic placement equipment
Compatible with infrared and vapor phase reflow solder process
Mono-color type
Pb-free
Product Photo Here
The
OVFSQ4C8
is designed with higher forward voltage to maximize brightness and incorporates a low-profile
lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low
current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This
square package allows high-density arrays to form light engines.
Applications
x
Automotive: Rear stop/turn signal lamps/truck marker lamps
x
Mood-setting decoration and landscape lighting
x
Special decorative interior/exterior lighting
x
Special effects stage lighting
x
Illumination for signs and channel letters
x
Traffic signals, pedestrian and walkway signs
Part Number
OVFSQ4C8
Material
AlInGaP
Emitted Color
Red-Orange
Flux Typ. mlm
4500
Lens Color
Water Clear
RoHS
Moisture
2,3 ANODE
1,4 CATHODE
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A
04/06
Page 1 of 4
4-Pin Red-Orange LED Lamp
OVFSQ4C8
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature (3 mm from the base of the epoxy bulb)
1
Reverse Voltage
Continuous Forward Current
2
Peak Forward Current (10% Duty Cycle, PW
Power Dissipation
-40 ~ +100° C
-40 ~ +100° C
260° C
5V
70 mA
200 mA
220 mW
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Heat sink is adequate if the device is operated at ambient temperature higher than 25° For long term performance the drive currents
C.
between 10 mA and 50 mA are recommended. Please contact an Optek sales representative for more information on recommended drive
conditions.
T
A
= 25
o
C unless otherwise noted
SYMBOL
lumen
V
F
I
R
D
Electrical Characteristics
PARAMETER
Luminous Flux
Forward Voltage
Reverse Current
Dominant Wavelength
50% Power Angle
MIN
3000
----
----
612
----
TYP
4500
2.6
----
618
40
MAX
----
3.2
100
628
----
UNITS
mlm
V
µA
nm
deg
CONDITIONS
I
F
= 70 mA
I
F
= 70 mA
V
R
= 5 V
I
F
= 70 mA
I
F
= 70 mA
2
½
Lamps are sorted to luminous flux (
V
), forward voltage (V
F
), and dominant wavelength (
D
) bins shown.
Orders for OVFSQ4C8 may be filled with any or all bins contained as below.
Luminous Flux mlm)
Standard Bins
(I
F
= 70 mA)
5000-7300
4000-6100
3500-4800
3000-4200
612
M
L
K
J
Luminous flux is at
J bin or above.
Dominant Wavelength (nm)
628
Forward Voltage (V
F
)
Rank
Voltage (V)
V4
2.2–2.4
V5
2.4–2.6
V6
2.6–2.8
V7
2.8–3.0
V8
3.0–3.2
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A
04/06
Page 2 of 4
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Phone: (972) 323-2200 or (800) 341-4747
4-Pin Red-Orange LED Lamp
OVFSQ4C8
Typical Electro-Optical Characteristics Curves
mA
%
Forward Current vs Forward Voltage
V
Relative Luminous Flux vs Forward Current
mA
Half Power
WL = 23 nm
mA
nm
°
C
Relative Luminous Flux vs Wavelength
Maximum Forward DC Current vs Ambient
Temperature
50% Power Angle: 40°
V
A
Far Field Pattern
Reverse Current vs Reverse Voltage
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A
04/06
Page 3 of 4
4-Pin Red-Orange LED Lamp
OVFSQ4C8
Moisture Resistant Packaging
60/Tube
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A
04/06
Page 4 of 4
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Phone: (972) 323-2200 or (800) 341-4747