1 Introduction The resolver based on the principle of electromagnetic induction, sometimes also called a resolver, is a precision control motor that completes the detection function of shaft angular d...
http://www.alldatasheet.com/If you know the product model, this is a good place to find the datasheet http://www.avagotech.cn/The Chinese website of Avago, a semiconductor company spun off from Angel ...
I recently debugged DDR4 and used xilinx's xcku040-ffva1156-2-e FPGA. It worked before and was relatively normal, but after a period of time, ddr4 always self-checks randomly, that is, after the self-...
1. Introduction to USCI I2C Driver For MSP430G2553, the hardware I2C is provided by the peripheral USCI (Universal Serial Communication Interface). USCI is divided into USCI_A and USCI_B, of which USC...
1. Design tasksUse the AT89C51 single-chip microcomputer to generate the "beep, beep,..." alarm sound and output it from the P1.0 port. The frequency is 1KHz. According to the above figure, we can see...
It is probably to generate a PWM wave of a certain frequency through the clock
Using FPGA can get a more perfect waveform, but if only a CLK wave is provided, F5529LP can do it completely.
#include ms...