Optoway
SPB-8620LG / SPB-8620BLG / SPB-8620ALG
FEATURES
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
SPB-8620LG
(RoHS Compliant)
DESCRIPTION
1
***********************************************************************************************************************************************************************
1310 nm TX / 1550 nm RX , 3.3V / 4.25 Gbps
1-Fiber
SM LC SFP Transceiver
**********************************************************************************************************************************************************************
1-Fiber Bi-Directional SFP Optical Transceiver
Up to 4.25 Gb/s
Compliant with Fibre Channel FC-PI 400/200/100
Compliant with IEEE 802.3ah-2004 1000BASE-BX
Simplex LC Connector
1310 nm DFB LD Transmitter
1550 nm Receiver
Distance Up to 20 km
AC/AC Coupling according to MSA
Single +3.3 V Power Supply
RoHS Compliant
0 to 70
o
C Operating: SPB-8620LG
-10 to 85
o
C Operating: SPB-8620BLG
-40 to 85
o
C Operating: SPB-8620ALG
Class 1 Laser International Safety Standard IEC 60825
Compliant
The SPB-8620LG series is small form factor pluggable
module for 4x/2x/1x Fibre Channel and 1000BASE-BX
Gigabit Ethernet single fiber communications by using 1310
nm transmitter and 1550 nm receiver. It is with the SFP
20-pin connector to allow hot plug capability. The
transmitter section uses a multiple quantum well 1310 nm
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver
section uses an integrated 1550 nm detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
APPLICATIONS
l
Fibre Channel Links
l
WDM Gigabit Ethernet Links
l
SONET/SDH Equipment Interconnect
ORDER INFORMATION
P/No.
SPB-8620LG
SPB-8620BLG
SPB-8620ALG
Bit Rate
(Gb/s)
4/2/1
4/2/1
4/2/1
Distance
TX
(km)
(nm)
20
1310 DFB
20
1310 DFB
20
1310 DFB
RX
(nm)
1550
1550
1550
Package
LC SFP
LC SFP
LC SFP
Temp TX Power
(
o
C)
(dBm)
0 to 70
0 to -5
-10 to 85
0 to -5
-40 to 85
0 to -5
RX Sens.
(dBm)
-18
-18
-18
RoHS
Compliant
Yes
Yes
Yes
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008
V1.0
Optoway
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Symbol
Tstg
Topr
Min
-40
0
-10
-40
0
0
GND
0
Max
85
70
85
85
85
3.6
Vcc
30
Units
o
C
o
C
SPB-8620LG
Notes
SPB-8620LG
SPB-8620BLG
SPB-8620ALG
Non condensing
2
***********************************************************************************************************************************************************************
Relative Humidity
Power Supply Voltage
Input Voltage
Output Current
RH
Vcc
---
Iout
%
V
V
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Case Temperature
Symbol
Vcc
I
CC (TX+RX)
Topr
Min
3.13
0
-10
-40
1
Typ
3.3
200
Max
3.47
300
70
85
85
Units / Notes
V
mA
o
C / SPB-8620LG
o
C / SPB-8620BLG
o
C / SPB-8620ALG
Gb/s
Data Rate
4.25
Transmitter Specifications (0
o
C < Topr < 70
o
C, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Optical Modulation Amplitude
@ 4.25 Gb/s
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Optical Rise Time
Relative Intensity Noise
Electrical
Data Input Current
–
Low
Data Input Current
–
High
Differential Input Voltage
TX Disable Input Voltage
–
Low
TX Disable Input Voltage
–
High
TX Disable Assert Time
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
Symbol
Po
OMA
λ
σ
λ
SMSR
t
r
/ t
f
RIN
I
IL
I
IH
V
IH
- V
IL
T
DIS, L
T
DIS, H
T
ASSERT
T
DEASSERT
T
FaultL
T
FaultH
Min
-5
290
1260
30
90
-118
-350
0.5
0
2.0
350
2.4
0.5
Vcc
10
1
0.5
Vcc+0.3
1310
Typ
Max
0
Units
dBm
µV
nm
nm
dB
ps
dB/Hz
µA
µA
V
V
V
µs
ms
V
V
Notes
1
1360
1
-20 dB width
20% to 80% Values
Peak-to-Peak
2
2
0
2.0
3
3
1. Output power is power coupled into a 9/125
µm
single mode fiber.
2. Measured with a 2
7
-1 PRBS.
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008
V1.0
Optoway
Receiver Specifications (0
o
C < Topr < 70
o
C, 3.13 V < Vcc < 3.47V)
Parameter
Optical
Sensitivity @4.25Gbps
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
Electrical
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage
–
High
Signal Detect Assert Time
Signal Detect Deassert Time
Symbol
Sen1
Pin
Pa
Pd
Min
---
0
---
-30
1.0
1480
14
0.6
0
2.0
Typ
---
---
---
---
---
Max
29
-18
---
-18
---
1580
Units
µW
dBm
dBm
dBm
dBm
dB
nm
dB
V
V
V
µs
µs
SPB-8620LG
Notes
4
5
Transition: low to high
Transition: high to low
6
3
***********************************************************************************************************************************************************************
ORL
V
OH
–
V
OL
V
OL
V
OH
AS
MAX
ANS
MAX
2.0
0.5
Vcc+0.3
100
300
7
7
OFF to ON
ON to OFF
4. Measured at PRBS 2
7
-1 at BER 1E-12.
5. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 9 dB. For example, an OMA of 29
µW
is
approximately equal to an average power of -17.3 dBm, average with an Extinction ratio of 9 dB.
6. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
7. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
RECOMMENDED CIRCUIT SCHEMATIC
VeeT
Tx_DISABLE
Tx_FAULT
(1,17,20)
3
2
4.7K to 10KΩ
TD +
18
Z=50Ω
TD -
19
Z=50Ω
VccT
16
10nF
1μH
Vcc 3.3V
10μF
10nF
1μH
VccR
15
10nF
10μF
10μF
TD -
TD +
Tx_DISABLE
Tx_FAULT
LD
Driver
100Ω
SerDes
IC
Protocol
IC
RD -
12
Z=50Ω
100Ω
RD -
POST
Amp
RD +
13
Z=50Ω
4.7K to 10KΩ
RD +
depending on SERDES
LOSS OF SINGAL
LOS
VeeR
MOD_DEF(0)
8
(9,10,11,14)
6
5
4
4.7K to 10KΩ
Vcc 3.3V
4.7K to 10KΩ
MODULE DETECT
SCL
SDA
4.7K to 10KΩ
EEPROM
MOD_DEF(1)
MOD_DEF(2)
SFP module
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008
V1.0
Optoway
CONNECTION DIAGRAM
SPB-8620LG
4
***********************************************************************************************************************************************************************
PIN
1
2
3
4
5
6
7
8
9
10
Signal Name
TX GND
TX Fault
TX Disable
MOD-DFE2
MOD-DEF1
MOD-DEF0
N/C
LOS
RX GND
RX GND
Description
Transmitter Ground
Transmitter Fault Indication
Transmitter Disable (Module disables
on high or open)
Modulation Definition 2
–
Two wires
serial ID Interface
Modulation Definition 1
–
Two wires
serial ID Interface
Modulation Definition 0
–
Ground in
Module
Not Connected
Loss of Signal
Receiver Ground
Receiver Ground
PIN
11
12
13
14
15
16
17
18
19
20
Signal Name
Description
RX GND
Receiver Ground
RX DATA OUT- Inverse Receiver Data Out
RX DATA OUT+ Receiver Data Out
RX GND
Vcc RX
Vcc TX
TX GND
TX DATA IN+
TX DATA IN-
TX GND
Receiver Ground
Receiver Power
–
3.3V±5%
Transmitter Power
–
3.3V±5%
Transmitter Ground
Transmitter Data In
Inverse Transmitter Data In
Transmitter Ground
Module Definition
Module Definition
4
MOD-DEF2
PIN 4
SDA
MOD-DEF1
PIN 5
SCL
MOD-DEF0
PIN 6
LV-TTL Low
Interpretation by Host
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E
2
PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008
V1.0
Optoway
PACKAGE DIAGRAM
Units in mm
SPB-8620LG
5
***********************************************************************************************************************************************************************
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
1/1/2008
V1.0
京公网安备 11010802033920号
EEWORLD
