EEWORLDEEWORLDEEWORLD

Part Number

Search

RF178-01SB2-01BR3-0100

Description
Interconnection Device, LEAD FREE
CategoryThe connector    The connector   
File Size615KB,3 Pages
ManufacturerSAMTEC
Websitehttp://www.samtec.com/
Download Datasheet Parametric View All

RF178-01SB2-01BR3-0100 Overview

Interconnection Device, LEAD FREE

RF178-01SB2-01BR3-0100 Parametric

Parameter NameAttribute value
MakerSAMTEC
package instructionLEAD FREE
Reach Compliance Codeunknown
Connector typeINTERCONNECTION DEVICE
Base Number Matches1
REVISION M
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
FIG.2
RF178-XXXXX-XXXXXX-XXXX
CABLE CALLOUT
178: CCA-178 (RG-178 COAXIAL CABLE)
END 1 CONNECTOR
-01BJ: SMA-J-C-X-ST-BH2 (SEE SHEET 2)
-01BR: SMA-J-C-X-ST-BR2 (SEE SHEET 2)
-02SJ: MCX-J-C-X-ST-CA2 (SEE SHEET 2)
-02RP: MCX-P-C-XX-RA-CA2 (SEE SHEET 2)
-02SP: MCX-P-C-XX-ST-CA2 (SEE SHEET 2)
-03SP: MMCX-P-C-XX-ST-CA2 (SEE SHEET 2)
-03RP: MMCX-P-C-X-RA-CA2 (SEE SHEET 3)
-01SB: SMA-J-C-X-ST-SB2 (SEE SHEET 3)
-01SR: SMA-J-C-X-ST-SR2 (SEE SHEET 3)
END 1 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD / NICKEL COMBINATION
3: ALTERNATE GOLD / NICKEL
(SEE SHEET 2 FOR PLATING SPECIFICS)
OVERALL CABLE LENGTH
MILLIMETERS OF CABLE
0100 MIN. (SEE NOTE 8 & 9)
END 2 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD / NICKEL COMBINATION
3: ALTERNATE GOLD / NICKEL
*(LEAVE BLANK FOR -SING OR -XXXXXX
END 2 PREPARATION)
END 2 CONNECTOR OR PREPARATION
-01BJ: SMA-J-C-X-ST-BH2 (SEE SHEET 2)
-01BR: SMA-J-C-X-ST-BR2 (SEE SHEET 2)
-02SJ: MCX-J-C-X-ST-CA2 (SEE SHEET 2)
-02RP: MCX-P-C-XX-RA-CA2 (SEE SHEET 2)
-02SP: MCX-P-C-XX-ST-CA2 (SEE SHEET 2)
-03SP: MMCX-P-C-XX-ST-CA2 (SEE SHEET 2)
-03RP: MMCX-P-C-X-RA-CA2 (SEE SHEET 3)
-01SB: SMA-J-C-X-ST-SB2 (SEE SHEET 3)
-01SR: SMA-J-C-X-ST-SR2 (SEE SHEET 3)
-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11)
-XXXXXX: STRIPPED AND TINNED (THIS END ONLY-
SEE NOTES 11-15 & SHEET 3, FIG. 3)
(SEE FIG. 2) "C" FORMAT: X.X mm
(SEE FIG. 2) "B" FORMAT: X.X mm
(SEE FIG. 2) "A" FORMAT: X.X mm
CABLE STRIPPING DIMENSIONS
PER CONFIGURATIONS
(SEE TABLE 1)(SEE NOTES 12,13,14,15)
"A" mm
"B" mm
"C" mm
C
"D" mm
"E" mm
C
C
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2).
(SEE TABLE 1 FOR SUBTRACTORS)
C
3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS.
4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1.
C 5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3033-M.
-LOCKWASHERS, NUTS, AND GASKETS TO BE SHIPPED UNASSEMBLED.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS.
9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA.
10. MINIMUM BEND RADIUS FOR RG178 = 10.2 [.40].
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm.
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A.
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B.
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C.
16. FOR -RA TO -RA, CONNECTORS SHOULD BOTH BE ORIENTED UP. (SEE SHEET 3, FIG. 4)
C
RF178-02SJX-03RPX-XXXX SHOWN
F:\DWG\MISC\MKTG\RF178-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
FIG. 1
Pb THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
.X: 0.3 [.01]
2
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
ANGLES
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
SEE END 1 AND END 2 ASSEMBLY PRINTS
RF178 CABLE ASSEMBLY
RF178-XXXXX-XXXXXX-XXXX
5/6/2005
BY:
TIM P.
SHEET
1
OF
3
Cumulative error analysis and clock frequency optimization for UART communication in MSP430FR2311
[align=left][color=rgb(85, 85, 85)][font="][size=14px][b]Introduction[/b][/size][/font][/color][/align][align=left][color=rgb(85, 85, 85)][font="][size=14px]In UART communication design, engineers wil...
alan000345 Microcontroller MCU
[TI recommended course] #[High Precision Laboratory] Interface: RS-485#
//training.eeworld.com.cn/TI/show/course/5506...
chenzhufly TI Technology Forum
Carbon dioxide gas sensor detection circuit
The carbon dioxide sensor is a machine used to detect the concentration of carbon dioxide. Carbon dioxide is one of the raw materials for photosynthesis of green plants, and 95% of the dry weight of c...
火辣西米秀 Analogue and Mixed Signal
The SDA and SCL of this clock IC can be connected to the MCU's normal IO! Does the 7th pin have to be connected to the interrupt port? If the MCU interrupt port...
Can the SDA and SCL of this clock IC be connected to the MCU's normal IO? Does the 7th pin have to be connected to the interrupt port? If the MCU interrupt port is not enough, can it be replaced with ...
QWE4562009 Integrated technical exchanges
E1 can be burned on PCB using RFP software, but simulation connection cannot be made
When I click the connect to debug tool menu, an error message appears: No response from the CPU. Please confirm the signal of the CLOCK or RESET, WAIT and so on. (E1200416). The chip model is R5F10WMC...
cymchina Renesas Electronics MCUs
Considerations for selecting solid-state relays
When using solid-state relays, users should pay attention to the application conditions and reasonable selection of solid-state relay performance parameters and load capacity. The following four aspec...
fish001 Analogue and Mixed Signal

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号