M2 Series
5x7 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator
*Contact factory for availability
X
O
NOTE:
A capacitor of value 0.01
µF
or greater between Vdd and Ground
is recommended.
Pin Connections
1. See load circuit diagram #2 on page 148. Consult factory with nonstandard output load requirements.
2. Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load.
99
Revised 7/22/03