M Series
Applications
Submarine : Sonars, degaussing, bulkhead
Subsea defense : mines, TAS
Underwater instrumentation : Cameras,
hydrophones, diving
Water pollution control : Pumps, valves
Offshore and oceanography : ROV,
subsea control, platform
Description
• Rugged screw coupling connectors in high
corrosion resistant shells which are made
in nickel aluminum bronze alloy. The design
provides a very high reliability with dry mate
sealing down to 2.000 meters immersion
(deeper depth with special backshells). The M
marine connector series is approved by
VERITAS and LLOYD’S Register of shipping.
Standard
Proprietary product line
Mechanical
Pressures
Test
pressure
Operating
pressure
Test
pressure
Operating
pressure
Insert in Teflon
®
Mated
Unmated
-
-
Insert in Kel’f
®
Mated
Unmated
200 bars
100 bars
Size
9M
-
-
100 bars
50 bars
200 bars
60 bars
200 bars
120 bars
Other Sizes
10, 14, 20, 24
100 bars
30 bars
100 bars
60 bars
Connectors double watertightness can withstand higher pressures than those above (test pressure : 300 bars mated connectors).
Note 1 :
For long unmated immersion use watertight caps.
Note 2 :
Please consult us about higher operating pressure than those above.
Shells :
Nickel aluminum bronze :
Cu A1 9 Ni 3 Fe 2, Scoop-Proof
Inserts :
Teflon
®
= PTFE
Polytetrafluorethylene.
or Kel’f
®
= PCTFE
Polymonochlorotrifluorethylene
®
Trade marks of Dupont de Nemours Inc.
Types of contacts :
Solder unremovable
except power contacts (sizes 2 and 6).
Plating of contacts:
Gold on nickel
Watertight washers :
Neoprene
Polarization :
With 5 keys
O-Rings :
Nitrile elastomer
Endurance :
500 cycles mating/unmating
Free-Fall :
Connecting plug or plug harness
< 1,5 m
Electrical features
Service rating at sea level test voltage :
• Voltage rating 1 - 1 500 Vrms 50 Hz
• Voltage rating 2 - 2 300 Vrms 50 Hz
• Voltage rating 3 - 15 000 Vrms 50 Hz
Operation voltage :
• Voltage rating 1 - 600 Vrms 50 Hz
• Voltage rating 2 - 1 000 Vrms 50 Hz
• Voltage rating 3 - 7 000 Vrms 50 Hz
Dielectric resistance :
≥
5000 megohms at
20°C and 60 % relative humidity
Grounding resistance :
(receptacle and
plug assembled)
≤
10 mΩ at 20 °C and 60 %
relative humidity
Environmental
Temperature range :
-20°C +70°C -68°F
+158°F
Marine environment :
30 years ageing
Vibrations :
From 0,1Hz to 1 Hz : amplitude = 25 mm
From 1Hz to 5 Hz : acceleration = 0,1 g
From 5Hz to 22Hz : amplitude = 1 mm
From 22Hz to 50Hz : acceleration = 2 g
Duration 1 hour on each axis
Shocks :
Static acceleration of 120 g on
each axis
Fluids resistance :
oil, alcohol, petrol, diesel
fuel, sea water
Various gases :
natural, butane, propane,
freon
Various acids
241
M Series
Dimensions and electrical features of contacts
Size
Ø
(mm)
1.02
1.59
1.02
1.59
1.93
2.39
5
7
3
1.59
Solder
well Ø
(mm)
0.9 +0.1
0
+0.1
1.2
0
0.9 +0.1
0
1.4 +0.1
0
1.9 +0.1
0
+0.1
2.3
0
+0.1
6.2
0
+0.1
9.0
0
+0.1
2.6
0
+0.1
1.4
0
Contacts
Nominal
current
(Amp.)
7
14
7
14
20
26
65
115
26
14
cables
Contact
resistance
(mΩ)
≤
4
≤
3
≤
4
≤
3
≤
2.5
≤
2
≤
1
≤
0.6
≤
2
≤
3
AWG Gauge
Cross section in mm
2
22
24
26
0.38
0.21
0.14
20
22
24
0.60
0.38
0.21
22
24
26
0.38
0.21
0.14
18
20
22
0.93
0.60
0.38
14
16
18
1.91
1.34
0.93
12
14
16
3.15
1.91
1.30
6
8
10
13.4
8.43
5.15
2
4
6
34.5
21.8
13.4
Consult us
Consult us
For connectors
size 9M
20
16
20
16
For connectors
sizes 10 M,
14 M, 20 M
and 24 M
14
12
6
2
TX 50
TX 75
General configuration
•
•
•
•
•
•
FED
PCE
FDED
PCDE
TER
TEC
:
:
:
:
:
:
plug with single watertightness
cable connecting plug with single watertightness
plug with double watertightness
cable connecting plug with double watertightness
jam-nut bulkhead
square flange bulkhead
•
•
•
•
•
•
RER
REC
BEF
BER
LREC
REC-SC
:
:
:
:
:
:
jam-nut receptacle
square flange receptacle
sealing cap for plug
sealing cap for receptacle or cable connecting plug
105° elbow mounting
cable clamp receptacle
LREC
4 fixing
screws
FED
REC
cable
solder
buckets
REC
PCE
BER
or BERC
(with cord
FED
REC
cable
FDED
REC
cable
4 fixing
screws
FDED
cable
REC
cable
PCDE
BEF
or BEFC
(with cord)
242
M Series
Ordering information
shell
FED
PCE
FDED
PCDE
TEC
RER
REC
TER
REC-SC
-
straight plug/single watertightness
-
cable connecting plug/single watertightness
-
straight plug/double watertightness
-
cable connecting plug/double watertightness
-
square flange bulkhead
-
round flange receptacle
-
square flange receptacle
-
feed through bulkhead
-
cable clamp square flange receptacle
FED
M
24 M
T
48.16
M
265
contacts
M -
pin
F -
socket
1-
pins and sockets for feed through bulkheads
shell size
9M
10 M
14 M
20 M
24 M
insulating material
T -
teflon
K -
kel’f
contact layouts
-
see table page below
part number of cable clamp accessories
-
see table page 250
nothing for RER - REC and TER
outside maximum diameter
-
of cable (in 1/10th of mm)
-
for standard cables mention maximum diameter of the specification
-
for double watertightness version mention diameter on inner sheath too
-
nothing for RER - REC and TER
Example :
To order a cable connecting plug size 20M with Teflon insulating insert, 16 pins size 12 and standard cable clamp without groun-
ding for cable outside diameter 22.6 mm give part number : PCE M 20 M. T. 16-12. A. 226
Contact layouts
Sizes
9M
4 contacts size 16
voltage rating : 2 300 V
02 - 14
7 contacts size 20
voltage rating : 1 500 V
03 - 14
04 - 16
05 - 16
04 - 16
07 - 20
10 M
2 contacts size 14
voltage rating : 2 300 V
07 - 20
3 contacts size 14
voltage rating : 2 300 V
1C - 50
1C - 75
1 COAX 50
Ω
or 75
Ω
voltage rating : 1 500 V
03 - 12
4 contacts size 16
voltage rating : 2 300 V
01 - HT
5 contacts size 16
voltage rating : 1 500 V
7 contacts size 20
voltage rating : 1 500 V
01 - 06
1 high voltage
voltage rating : 15 000 V
04 - 12
07 - 14
14 M
1 contact size 06
voltage rating : 2 300 V
3 contacts size 12
voltage rating : 2 300 V
4 contacts size 12
voltage rating : 2 300 V
7 contacts size 14
voltage rating : 2 300 V
243
M Series
Contact layouts
12 - 16
19 - 20
1 C - 50
TX - 50
or
TX - 75
14 M
12 contacts size 16
voltage rating : 2 300 V
01 - 02
19 contacts size 20
voltage rating : 1 500 V
03 - 06
1 COAX 50
Ω
voltage rating : 2 300 V
04 - 06
1 TRIAX 50
Ω
or 75
Ω
voltage rating : 2 300 V
07 - 12
1 contact size 2
voltage rating : 2 300 V
16 - 12
3 contacts size 6
voltage rating : 2 300 V
21 - 14
4 contacts size 6
voltage rating : 2 300 V
27 - 16
7 contacts size 12
voltage rating : 2 300 V
32 - 16
20 M
16 contacts size 12
voltage rating : 2 300 V
41 - 20
21 contacts size 14
voltage rating : 1 500 V
04 - HT
27 contacts size 16
voltage rating : 1 500 V
32 contacts size 16
voltage rating : 1 500 V
41 contacts size 20
voltage rating : 1 500 V
01 - 120
MC
4 contacts high voltage
voltage rating : 15 000 V
03 - 06
03 - 02
04 - 02
1 contact cross section 120 mm
2
nominal current 600 A
06 - 16
3 contacts size 6
voltage rating : 2 300 V
07 - 06
3 contacts size 2
voltage rating : 2 300 V
27 - 12
4 contacts size 2
voltage rating : 2 300 V
37 - 14
24 M
6 contacts size 16
voltage rating : 3 000 V
48 - 16
7 contacts size 6
voltage rating : 2 300 V
61 - 16
27 contacts size 12
voltage rating : 2 300 V
15 - 16
+
04 - 10
37 contacts size 14
voltage rating : 2 300 V
13 - 12
+
24 - 20
48 contacts size 16
voltage rating : 1 500 V
61 contacts size 16
voltage rating : 1 500 V
15 contacts size 16 and 4 contacts size 10 13 contacts size 12 and 24 contacts size 20
voltage rating : 1 500 V - insulator in kel’f voltage rating : 1 500 V - insulator in kel’f
244
M Series
The M Series offer two versions :
•
Single watertightness for cables with single jacket
•
Double watertightness for cables with inner and outer sheaths
Single Watertightness on outer sheath :
x |
connector
braid
Watertightness
on panel
jacket
y
x { z
~ }
~
Watertightness at the interface
plug/receptacle
Watertightness on cable
Options : With steel armor / CU braid
Without steel armor / CU braid
cable
• The M Series Single watertightness connectors are available in 5
standard sizes, 9M, 10M, 14M, 20M and 24M. 100 % watertightness
is achieved by both o’rings and packing washers inside the metal
housings. The packing washers offer waterproofing independently of
the cable clamps so that a brutal traction on the cable cannot reduce
the watertightness.
• Since the watertightness is not achieved through overmolding or heat
vulcanization the assembling of connectors can be made outside
workshop on the spot when necessary.
• The main parts achieving watertightness can be seen on fig. 1.
- O’rings (1) are located on receptacles (2), plugs (3) and pin and
socket inserts (4) and (5).
- The packing washer (6) is compressed by metal washers (7) through
screwing of the rear tightening metal sleeve (8).
- The neoprene boot is intended to limit the cable radius curvature.
Double Watertightness on inner and outer sheaths
•
FDED straight plug
•
PCDE cable connecting plug
Watertightness on inner sheath
braid crimping
Watertightness on jacket
connector
braid
inner sheath
jacket
{ x z
} ~
Options :
With steel armor / CU braid
Without steel armor / CU braid
cable
• The M Series double watertightness connectors are available in
3 sizes 14M, 20M and 24M. The watertightness is ensured at two
levels :
- on the outer jacket
- on the inner sheath.
Mechanical cable strength is provided by :
- a mechanical capture of the braid armor
- a clamping thanks to a metal clamping sleeve on sheath in the event
there is no amour.
• The main parts achieving watertightness at the level of the plug can
be seen on fig. 2.
- On the outer jacket, packing washer (6) are compressed by metal
tightening sleeve (8).
- On the inner sheath, compound injection inside a compounding
housing (10) ensures a second watertightness level (watertightness
relay).
- The neoprene boot (9) has the same roles as preceding version.
Note :
The two versions are compatible with in the following standard
M series shells :
• RER receptacle with round flange, front fitting and rear axial
nut
• REC receptacle with square flange, front fitting with 4 screws
• TER bulkhead with round flange, front fitting and rear axial
nut
• TEC bulkhead with square flange
245
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
