This document states the current technical specifications
regarding the Spansion product(s) described herein. Each product described
herein may be designated as Advance Information, Preliminary, or Full
Production. See
Notice On Data Sheet Designations
for definitions.
Publication Number
S71WS-N-02
Revision
A
Amendment
2
Issue Date
April 11, 2005
This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not
design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.
A d v a n c e
I n f o r m a t i o n
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise
readers of product information or intended specifications throughout the product life cycle, includ-
ing development, qualification, initial production, and full production. In all cases, however,
readers are encouraged to verify that they have the latest information before finalizing their de-
sign. The following descriptions of Spansion data sheet designations are presented here to
highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more spe-
cific products, but has not committed any design to production. Information presented in a
document with this designation is likely to change, and in some cases, development on the prod-
uct may discontinue. Spansion LLC therefore places the following conditions upon Advance
Information content:
“This document contains information on one or more products under development at Spansion LLC. The
information is intended to help you evaluate this product. Do not design in this product without con-
tacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a
commitment to production has taken place. This designation covers several aspects of the product
life cycle, including product qualification, initial production, and the subsequent phases in the
manufacturing process that occur before full production is achieved. Changes to the technical
specifications presented in a Preliminary document should be expected while keeping these as-
pects of production under consideration. Spansion places the following conditions upon
Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. The Preliminary status of this document indicates that product qualification has been completed,
and that initial production has begun. Due to the phases of the manufacturing process that require
maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-
tions due to changes in technical specifications.”
Combination
Some data sheets will contain a combination of products with different designations (Advance In-
formation, Preliminary, or Full Production). This type of document will distinguish these products
and their designations wherever necessary, typically on the first page, the ordering information
page, and pages with the DC Characteristics table and the AC Erase and Program table (in the
table notes). The disclaimer on the first page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal
changes are expected, the Preliminary designation is removed from the data sheet. Nominal
changes may include those affecting the number of ordering part numbers available, such as the
addition or deletion of a speed option, temperature range, package type, or V
IO
range. Changes
may also include those needed to clarify a description or to correct a typographical error or incor-
rect specification. Spansion LLC applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. Spansion LLC deems the products to have been in sufficient production volume such that sub-
sequent versions of this document are not expected to change. However, typographical or specification
corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or Fujitsu
sales office.
S71WS512Nx0/S71WS256Nx0 Based MCPs
S71WS-N-02_A2 April 11, 2005
S71WS512Nx0/S71WS256Nx0 Based MCPs
Stacked Multi-Chip Product (MCP)
256/512 Megabit (32M/16M x 16 bit) CMOS
1.8 Volt-only Simultaneous Read/Write,
Burst-mode Flash Memory with
128/64Megabit (8M/4M x 16-Bit) CosmoRAM
ADVANCE
INFORMATION
General Description
The S71WS-N Series is a product line of stacked Multi-Chip Product (MCP) packages and consists
of the following items:
One or more flash memory die
CosmoRAM-compatible pSRAM
The products covered by this document are listed in the table below. For details about their spec-
ifications, please refer to the individual constituent datasheet for further details.
[size=4]I need two 2812s to control four motors. The host needs to send control signals to the slave, and the slave sends encoder information to the host. Therefore, stable, real-time and rapid commun...
This is a very common reset circuit for STC, but why when I connect it like this, the RST pin is always 2.5V, and the microcontroller never works. Only when R1 is short-circuited to GND can it work? W...
[size=4]//Function name: VSqrt3 [/size] [size=4]//Function: Implement the square root of 32-bit fixed-point numbers [/size] [size=4]//Performance: The running time is less than 10us under the 60M main...
The use of multiple transmit and receive antennas is defined as MIMO, or multiple-input-multiple-output. This technology has garnered a fair amount of attention of late. As wireless systems become mor...
[align=left][font=sans-serif][size=4]In the linker tab of CCS build options, there are two options for Autoinit Model: Run-Time Autoinitialization and Load-Time Initialization. This article briefly in...
With its industry-leading low-power MSP microcontrollers, Texas Instruments (TI) is helping engineers solve the challenges of developing and building building automation applications. TI's MSP MCUs co...
MediaTek held an earnings conference today (31st), announcing that its second quarter profit was NT$7.31 billion (same unit below), the highest in nearly eight quarters, and its earnings per share we...[Details]
Substandard application performance can create software or network problems. To ensure that the software meets or exceeds design expectations, it is necessary to analyze the application's performan...[Details]
Recently, the well-known data statistics company IDC released the statistics of the tablet computer market in the second quarter of 2019. Among them, Apple iPad still maintained its king status, rank...[Details]
For those who have never played with DMA, here is a brief introduction to DMA. Let's say it in your own words. That is, data is transferred from a certain location to a certain location. If DMA is no...[Details]
The FSC-BT631D module uses Nordic nRF5340 SoC to provide the latest low-power audio connectivity solution for headphones and audio devices Oslo, Norway – November 22, 2023 – IoT company Shenzhen...[Details]
AT89C51 is a low voltage, high performance CMOS 8-bit microprocessor with 4K bytes of flash programmable and erasable read-only memory, commonly known as a single-chip microcomputer. The device is ma...[Details]
Interference
is one of the main reasons for the failure of single-chip microcomputer measurement and control systems. The impact of interference on the system can affect the measurement and...[Details]
Universal Asynchronous Receiver/Transmitter (UART) is a universal serial data bus used for asynchronous communication and can achieve full-duplex communication. UART IP core is a way to implement seri...[Details]
According to previous news, the first model of the Redmi K50 universe will be officially released after the new year, and it will be a Snapdragon 8 gaming phone that focuses on gaming experience. It ...[Details]
Main features of AVR High reliability, powerful functions, high speed, low power consumption and low price have always been the important indicators to measure the performance of single-chip microc...[Details]
On the afternoon of April 12, Shanghai Lingdong Microelectronics Co., Ltd. (hereinafter referred to as "Lingdong Microelectronics") held an online press conference to launch the new MM32F5 series MCU...[Details]
Provides efficient power management for high operating voltage systems in portable handheld devices Beijing, China, October 31, 2023 – Littelfuse Corporation is an industrial technology manufact...[Details]
In order to ensure that lighting-grade white light LEDs can not only be well applied but also achieve high utilization efficiency, first of all, it is necessary to meet certain application conditio...[Details]
High-voltage soft start cabinet is a device used for high-voltage motor starting. Its main function is to reduce the current impact when the motor starts and extend the service life of the motor. T...[Details]