Basic information of OP271FZ amplifier:
OP271FZ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HERMETIC SEALED, DIP-8
OP271FZ amplifier core information:
The minimum operating temperature of OP271FZ is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.04 µA Its maximum average bias current is 0.07 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of OP271FZ is 8.5 V/us. The maximum slew rate of the OP271FZ given by the manufacturer is 7.2 mA, while the minimum slew rate is 5.5 V/us. Its minimum voltage gain is 100000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OP271FZ gain becomes 0.707 times the low-frequency gain is 5000 kHz.
The nominal supply voltage of OP271FZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of OP271FZ is 560 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OP271FZ:
OP271FZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.
OP271FZ amplifier additional information:
OP271FZ采用了VOLTAGE-FEEDBACK的架构。其属于低失调类放大器。OP271FZ的频率补偿情况是:YES。其温度等级为:INDUSTRIAL。OP271FZ不符合Rohs认证。
其对应的的JESD-30代码为:R-GDIP-T8。其对应的的JESD-609代码为:e0。OP271FZ的封装代码是:DIP。OP271FZ封装的材料多为CERAMIC, GLASS-SEALED。而其封装形状为RECTANGULAR。
OP271FZ封装引脚的形式有:IN-LINE。其端子形式有:THROUGH-HOLE。
Basic information of OP271FZ amplifier:
OP271FZ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HERMETIC SEALED, DIP-8
OP271FZ amplifier core information:
The minimum operating temperature of OP271FZ is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.04 µA Its maximum average bias current is 0.07 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of OP271FZ is 8.5 V/us. The maximum slew rate of the OP271FZ given by the manufacturer is 7.2 mA, while the minimum slew rate is 5.5 V/us. Its minimum voltage gain is 100000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OP271FZ gain becomes 0.707 times the low-frequency gain is 5000 kHz.
The nominal supply voltage of OP271FZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of OP271FZ is 560 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OP271FZ:
OP271FZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.
OP271FZ amplifier additional information:
OP271FZ采用了VOLTAGE-FEEDBACK的架构。其属于低失调类放大器。OP271FZ的频率补偿情况是:YES。其温度等级为:INDUSTRIAL。OP271FZ不符合Rohs认证。
其对应的的JESD-30代码为:R-GDIP-T8。其对应的的JESD-609代码为:e0。OP271FZ的封装代码是:DIP。OP271FZ封装的材料多为CERAMIC, GLASS-SEALED。而其封装形状为RECTANGULAR。
OP271FZ封装引脚的形式有:IN-LINE。其端子形式有:THROUGH-HOLE。
Parameter Name | Attribute value |
Is it Rohs certified? | incompatible |
package instruction | HERMETIC SEALED, DIP-8 |
Reach Compliance Code | unknown |
Amplifier type | OPERATIONAL AMPLIFIER |
Architecture | VOLTAGE-FEEDBACK |
Maximum average bias current (IIB) | 0.07 µA |
Maximum bias current (IIB) at 25C | 0.04 µA |
Nominal Common Mode Rejection Ratio | 115 dB |
frequency compensation | YES |
Maximum input offset voltage | 560 µV |
JESD-30 code | R-GDIP-T8 |
JESD-609 code | e0 |
low-dissonance | YES |
Negative supply voltage upper limit | -18 V |
Nominal Negative Supply Voltage (Vsup) | -15 V |
Number of functions | 2 |
Number of terminals | 8 |
Maximum operating temperature | 85 °C |
Minimum operating temperature | -40 °C |
Package body material | CERAMIC, GLASS-SEALED |
encapsulated code | DIP |
Encapsulate equivalent code | DIP8,.3 |
Package shape | RECTANGULAR |
Package form | IN-LINE |
Peak Reflow Temperature (Celsius) | NOT SPECIFIED |
power supply | +-15 V |
Certification status | Not Qualified |
minimum slew rate | 5.5 V/us |
Nominal slew rate | 8.5 V/us |
Maximum slew rate | 7.2 mA |
Supply voltage upper limit | 18 V |
Nominal supply voltage (Vsup) | 15 V |
surface mount | NO |
technology | BIPOLAR |
Temperature level | INDUSTRIAL |
Terminal surface | Tin/Lead (Sn/Pb) |
Terminal form | THROUGH-HOLE |
Terminal pitch | 2.54 mm |
Terminal location | DUAL |
Maximum time at peak reflow temperature | NOT SPECIFIED |
Nominal Uniform Gain Bandwidth | 5000 kHz |
Minimum voltage gain | 100000 |
Base Number Matches | 1 |
OP271FZ | OP271AZ | OP271AZ/883 | OP271EZ | OP271GP | OP271GS | OP271ARC/883 | OP-271GBC | |
---|---|---|---|---|---|---|---|---|
Description | Operational Amplifier, 2 Func, 560uV Offset-Max, BIPolar, CDIP8, HERMETIC SEALED, DIP-8 | Operational Amplifier, 2 Func, 400uV Offset-Max, BIPolar, CDIP8, HERMETIC SEALED, DIP-8 | Operational Amplifier, 2 Func, 400uV Offset-Max, BIPolar, CDIP8, HERMETIC SEALED, DIP-8 | Operational Amplifier, 2 Func, 330uV Offset-Max, BIPolar, CDIP8, HERMETIC SEALED, DIP-8 | Operational Amplifier, 2 Func, 700uV Offset-Max, BIPolar, PDIP8, | Operational Amplifier, 2 Func, 700uV Offset-Max, BIPolar, PDSO16, SOL-16 | Operational Amplifier, 2 Func, 400uV Offset-Max, BIPolar, PQCC20, LCC-20 | Operational Amplifier, 2 Func, 300uV Offset-Max, BIPolar, |
Reach Compliance Code | unknown | unknown | unknown | unknown | unknown | unknown | unknown | unknown |
Amplifier type | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER |
Architecture | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK |
Maximum average bias current (IIB) | 0.07 µA | 0.06 µA | 0.06 µA | 0.06 µA | 0.08 µA | 0.08 µA | 0.06 µA | 0.04 µA |
Maximum bias current (IIB) at 25C | 0.04 µA | 0.02 µA | 0.02 µA | 0.02 µA | 0.06 µA | 0.06 µA | 0.02 µA | 0.04 µA |
Nominal Common Mode Rejection Ratio | 115 dB | 120 dB | 120 dB | 120 dB | 100 dB | 100 dB | 120 dB | 100 dB |
frequency compensation | YES | YES | YES | YES | YES | YES | YES | YES |
Maximum input offset voltage | 560 µV | 400 µV | 400 µV | 330 µV | 700 µV | 700 µV | 400 µV | 300 µV |
JESD-30 code | R-GDIP-T8 | R-GDIP-T8 | R-GDIP-T8 | R-GDIP-T8 | R-PDIP-T8 | R-PDSO-G16 | S-PQCC-N20 | X-XUUC-N8 |
low-dissonance | YES | YES | YES | YES | YES | YES | YES | YES |
Negative supply voltage upper limit | -18 V | -18 V | -18 V | -18 V | -18 V | -18 V | -18 V | -18 V |
Nominal Negative Supply Voltage (Vsup) | -15 V | -15 V | -15 V | -15 V | -15 V | -15 V | -15 V | -15 V |
Number of functions | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Number of terminals | 8 | 8 | 8 | 8 | 8 | 16 | 20 | 8 |
Maximum operating temperature | 85 °C | 125 °C | 125 °C | 85 °C | 85 °C | 85 °C | 125 °C | 25 °C |
Minimum operating temperature | -40 °C | -55 °C | -55 °C | -40 °C | -40 °C | -40 °C | -55 °C | 25 °C |
Package body material | CERAMIC, GLASS-SEALED | CERAMIC, GLASS-SEALED | CERAMIC, GLASS-SEALED | CERAMIC, GLASS-SEALED | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | UNSPECIFIED |
encapsulated code | DIP | DIP | DIP | DIP | DIP | SOP | QCCN | DIE |
Encapsulate equivalent code | DIP8,.3 | DIP8,.3 | DIP8,.3 | DIP8,.3 | DIP8,.3 | SOP16,.4 | LCC20,.35SQ | DIE OR CHIP |
Package shape | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR | SQUARE | UNSPECIFIED |
Package form | IN-LINE | IN-LINE | IN-LINE | IN-LINE | IN-LINE | SMALL OUTLINE | CHIP CARRIER | UNCASED CHIP |
power supply | +-15 V | +-15 V | +-15 V | +-15 V | +-15 V | +-15 V | +-15 V | +-15 V |
Certification status | Not Qualified | Not Qualified | Not Qualified | Not Qualified | Not Qualified | Not Qualified | Not Qualified | Not Qualified |
minimum slew rate | 5.5 V/us | 5.5 V/us | 5.5 V/us | 5.5 V/us | 5.5 V/us | 5.5 V/us | 5.5 V/us | 5.5 V/us |
Maximum slew rate | 7.2 mA | 7.5 mA | 7.5 mA | 7.2 mA | 7.2 mA | 7.2 mA | 7.5 mA | 6.5 mA |
Supply voltage upper limit | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V |
Nominal supply voltage (Vsup) | 15 V | 15 V | 15 V | 15 V | 15 V | 15 V | 15 V | 15 V |
surface mount | NO | NO | NO | NO | NO | YES | YES | YES |
technology | BIPOLAR | BIPOLAR | BIPOLAR | BIPOLAR | BIPOLAR | BIPOLAR | BIPOLAR | BIPOLAR |
Temperature level | INDUSTRIAL | MILITARY | MILITARY | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | MILITARY | OTHER |
Terminal form | THROUGH-HOLE | THROUGH-HOLE | THROUGH-HOLE | THROUGH-HOLE | THROUGH-HOLE | GULL WING | NO LEAD | NO LEAD |
Terminal location | DUAL | DUAL | DUAL | DUAL | DUAL | DUAL | QUAD | UPPER |
Minimum voltage gain | 100000 | 200000 | 200000 | 200000 | 90000 | 90000 | 200000 | 200000 |
Is it Rohs certified? | incompatible | incompatible | incompatible | incompatible | incompatible | incompatible | incompatible | - |
package instruction | HERMETIC SEALED, DIP-8 | HERMETIC SEALED, DIP-8 | HERMETIC SEALED, DIP-8 | HERMETIC SEALED, DIP-8 | - | SOL-16 | QCCN, LCC20,.35SQ | DIE, DIE OR CHIP |
JESD-609 code | e0 | e0 | e0 | e0 | e0 | e0 | e0 | - |
Peak Reflow Temperature (Celsius) | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | - |
Nominal slew rate | 8.5 V/us | 8.5 V/us | 8.5 V/us | 8.5 V/us | 8.5 V/us | 8.5 V/us | 8.5 V/us | - |
Terminal surface | Tin/Lead (Sn/Pb) | Tin/Lead (Sn/Pb) | Tin/Lead (Sn/Pb) | Tin/Lead (Sn/Pb) | Tin/Lead (Sn/Pb) | Tin/Lead (Sn/Pb) | Tin/Lead (Sn/Pb) | - |
Terminal pitch | 2.54 mm | 2.54 mm | 2.54 mm | 2.54 mm | 2.54 mm | 1.27 mm | 1.27 mm | - |
Maximum time at peak reflow temperature | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED | - |
Nominal Uniform Gain Bandwidth | 5000 kHz | 5000 kHz | 5000 kHz | 5000 kHz | 5000 kHz | 5000 kHz | 5000 kHz | - |
Base Number Matches | 1 | 1 | 1 | 1 | 1 | 1 | - | - |