DFP
Vishay Dale
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
FEATURES
•
11 and 12 Schematics
•
0.065" [1.65 mm] height for high density packaging
•
Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
•
Hot solder dipped leads
•
Highly stable thick film
•
Wide resistance range
•
All devices are capable of passing the MIL-STD-202,
Method 210, Condition C "Resistance to Soldering Heat"
test
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
DFP
POWER RATING
P
25 °C
P
25 °C
ELEMENT PACKAGE
W
W
0.25
0.65
0.15
0.65
CIRCUIT
SCHEMATIC
11
12
LIMITING ELEMENT
VOLTAGE
MAX.
V≅
75
75
TEMPERATURE
1)
COEFFICIENT
ppm/°C
± 100
± 100
STANDARD
2)
TOLERANCE
%
2
2
RESISTANCE
RANGE
Ω
10 - 1M
10 - 1M
TEMPERATURE
COEFFICIENT
TRACKING
ppm/°C
50
50
Notes
1. Temperature Range: - 55 °C to + 125 °C
2. ± 1 % and ± 5 % tolerance available
• Consult factory for stocked values
TECHNICAL SPECIFICATIONS
11 Schematic
7 or 8 isolated resistors
The DFPxx11 provides the user with 7 or 8 nominally equal resistors with
each resistor isolated from all others. Commonly used in the following
applications:
• "Wired OR" Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Power Gate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
13 or 15 resistors with one pin common
The DFPxx12 provides the user with a choice of 13 or 15 nominally equal
resistors, each connected to a common pin (14 or 16). Commonly used in
the following applications:
• MOS/ROM Pull-up/Pull-down
• TTL Input Pull-down
• Open Collector Pull-up
• Digital Pulse Squaring
• "Wired OR" Pull-up
• TTL Unused Gate Pull-up
• Power Driven Pull-up
• High Speed Parallel Pull-up
DFP1411
Pin #1
DFP1611
12 Schematic
• • • • • • • •
DFP1412
Pin #1
DFP1612
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format)
D
GLOBAL MODEL
DFP
F
P
1
4
1
2
1
K
0
0
G
D
0
5
PACKAGING
SPECIAL
Blank = Standard
(Dash
Number)
(
u
p to 3 digits)
From
1-999
as applicable
PIN COUNT
14
16
SCHEMATIC
11
= Isolated
12
= Bussed
RESISTANCE
VALUE
R
= Decimal
K
= Thousand
M
= Million
10R0
= 10
Ω
680K
= 680 kΩ
1M00
= 1.0 MΩ
TOLERANCE
CODE
F
=±1
%
G
=±2
%
J
=±5
%
E05
= Lead (Pb)-free, Tube
D05
= Tin/Lead, Tube
Historical Part Number example: DFP1412102G (will continue to be accepted)
DFP
HISTORICAL MODEL
14
PIN COUNT
12
SCHEMATIC
102
RESISTANCE
VALUE
G
TOLERANCE CODE
D05
PACKAGING
www.vishay.com
328
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31513
Revision: 08-Sep-04
DFP
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
DIMENSIONS
in inches [millimeters]
Pin #1
0.250 [6.35]
Min.
0.050
[1.27]
Typ.
0.019
±
0.006
[0.48
±
0.15]
0.365 [9.27] Min.
0.385 [9.78] Max.
0.065
[1.65]
Max.
0.825 [20.96]
Max.
0.265 [6.73] Max.
0.250 [6.35]
Min.
0.005 + 0.004
- 0.002
[0.127 + 0.102
- 0.051]
Vishay Dale
GLOBAL MODEL
DFP14
DFP16
DIMENSION A
0.037 ± 0.010 [0.94 ± 0.25]
0.012 ± 0.010 [0.30 ± 0.25]
TECHNICAL SPECIFICATIONS
PARAMETER
Isolation Resistance 11 Schematic
Voltage Coefficient of Resistance
Maximum Operating Voltage
Operating Temperature Range
Storage Temperature Range
UNIT
MΩ
ppm/V
VDC
°C
°C
DFP14/16
> 100
< 50 typical
75
- 55 to + 125
- 55 to + 150
MECHANICAL SPECIFICATIONS
Marking
Model number, schematic number, value
tolerance, pin 1 indicator, date code.
Marking Resistance Permanency testing per MIL-STD-202
to Solvents
Method 215.
Solderability
Terminals
Per MIL-STD-202, Method 208E.
Per MIL-STD-1276 DFPxx11, DFPxx12 =
Type G (hot solder dipped). Hot solder
dipped leads supplied as standard finish.
Epoxy filled ceramic sandwich
Body
11 Schematic
Power Rating (Watts)
Package
12 Schematic
Power Rating (Watts)
Package
0.65
0.65
0.50
0.50
Single Resistor
0.25
Single Resistor
0.15
- 55
+ 25
+ 70
+ 125 + 150
- 55
+ 25
+ 70
+ 125 + 150
Derating
Ambient Temperature °C
Derating
Ambient Temperature °C
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding
Voltage
Document Number: 31513
Revision: 08-Sep-04
CONDITIONS
1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF”
for 100 hours ± 4 hours at + 25 °C ambient temperature
5 cycles between - 65 °C and + 125 °C
2.5 x rated working voltage, 5 seconds
45 minutes at full rated working voltage at - 65 °C
240 hours with humidity ranging from 80 % RH to 98 % RH
Leads immersed in + 260 °
ΔC
solder to within 1/16" of body for 10 seconds
Total of 18 shocks at 100 g's
12 hours at maximum of 20 g's between 10 and 2000 Hz
1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF”
for full 1000 hour period. Derated according to the curve.
1.5 pound pull for 30 seconds
10 000 Megohm (minimum)
No evidence of arcing or damage (200 V RMS for 1 minute)
MAX.
ΔR
(Typical Test Lots)
± 0.50 %
ΔR
± 0.50 %
ΔR
± 0.25 %
ΔR
± 0.25 %
ΔR
± 0.50 %
ΔR
± 0.25 %
ΔR
± 0.25 %
ΔR
± 0.25 %
ΔR
± 0.50 %
ΔR
± 0.25 %
ΔR
-
-
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com
329
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Analog electronics
京公网安备 11010802033920号
EEWORLD
