CXOX/CXOXHG OSCILLATOR
1 MHz to 160 MHz
Ultra-Miniature, High Stability
High Shock Crystal Oscillator
DESCRIPTION
Statek’s ultra miniature and ultra low profile
CXOX/CXOXHG oscillators consist of a CMOS/TTL
compatible hybrid circuit and a state-of-the-art, miniature,
fundamental-mode crystal.
FEATURES
DIMENSIONS
A
4
TOP
C
3
D
3
BOTTOM
High shock resistance (HG version)
CMOS and TTL compatible
Low power consumption
Full military testing available
Low acceleration sensitivity (HG version)
Optional Output Enable/Disable with Tri-State
Low EMI emission
Hermetically sealed ceramic package
Designed and manufactured in the USA
1
2
B
4
E
2
1
TYPICAL
DIM
A
B
inches
0.126
0.099
mm
3.20
2.50
1.00
1.12
1.00
0.75
MAXIMUM
inches
0.136
0.107
0.043
0.048
0.041
0.031
mm
3.40
2.70
1.09
1.21
1.10
0.85
C
(SM1)
0.039
C
(SM3/SM5)
0.044
D
E
0.040
0.030
APPLICATIONS
Military & Aerospace
Smart munitions
Communications
Navigation
GPS
Industrial, Computer & Communications
Miniature clock oscillator
Handheld instrumentation
PDA
Transponder/Animal migration
Medical
Test & diagnostic equipment
Handheld devices
0.039 (1.05)
0.110 (2.9)
0.031 (0.8)
PIN CONNECTIONS
1. Output Enable/Disable (E) or no connection (N)
2. Ground
3. Output
4. V
DD
SUGGESTED LAND PATTERN
0.141 (3.6)
0.051
(1.3)
inches (mm)
0.039
(1.0)
10168 Rev C
S
YS
TEM
C
ERT
I
F
I
C
AT
N
IO
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256
www.statek.com
IS
O
01
90
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Specifications below are examples. Specifications are subject
to change without notice. Tighter specifications available.
Please contact factory.
Frequency Range
1
Supply Voltage
Calibration Tolerance
2
Frequency Stability
Over Temperature
3
Supply Current (Typical)
24 MHz
32 MHz
50 MHz
130 MHz
Output Load (CMOS)
4
Start-up Time
Rise/Fall Time
Duty Cycle
5
Aging, first year
Shock, survival
6
Supply Voltage V
DD
-0.5 V to 7.0 V
Storage Temperature
-55
O
C to 125
O
C
Maximum Process Temperature 260
O
C for 20 seconds
1 MHz to 160 MHz
1.8 V to 5.0 V ± 10%
± 100 ppm
± 50 ppm for Commercial
± 100 ppm for Industrial
± 100 ppm for Military
1.8 V
3.3 V
5.0 V
1.5 mA
3.0 mA
8.0 mA
2.0 mA
5.0 mA
10.0 mA
3.0 mA
6.0 mA
13.0 mA
12.0 mA 23.0 mA
39.0 mA
15 pF
5 ms MAX
6 ns MAX
40% MIN 60% MAX
5 ppm MAX
5,000 g, 0.3 ms,
sine
HG: 10,000 g, 0.3 ms,
1
/
2
sine`
20 g, 10-2,000 Hz swept sine
1
/
2
ENABLE/DISABLE OPTIONS (E/N)
Statek offers two enable/disable options: E and N. The E-
version has a Tri-State output and stops oscillating internally
when the output is put into the high Z state. The N-version
does not have PIN 1 connected internally and so has no
enable/disable capability. The following table describes the
Enable/Disable option E.
ENABLE/DISABLE OPTION E
FUNCTION TABLE
Enable (Pin 1 High*) Disable (Pin 1 Low)
Output
Oscillator
Current
Frequency Output
Oscillates
Normal
High Z State
Stops
Very Low
Vibration, survival
7
*
When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.
Operating Temp. Range -10
O
C to 70
O
C (Commerical)
-40
O
C to 85
O
C (Industrial)
-55
O
C to 125
O
C (Military)
PACKAGING OPTIONS
Not all frequencies available at all voltages. Contact factory.
Tighter tolerances available.
Does not include calibration tolerances. Tighter tolerances available.
Higher CMOS loads and TTL loads available. Contact factory.
45/55 available upon request in most cases.
Higher shock version available. Contact factory for requirements above 10,000 g
Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also
available.
Note: All parameters are measured at ambient temperature with a 10 M , 15 pF load.
1.
2.
3.
4.
5.
6.
7.
CXOX/
CXOXHG
- Tray Pack
- 12 mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet
#10109)
HOW TO ORDER CXOX/CXOXHG SURFACE MOUNT CRYSTAL OSCILLATORS
CXOX
HG
4
S
“S” if special or
custom design.
Blank if Std.
N
Enable/Disable
Option
E or N
SM3
Terminations
Blank = SM1
= Gold Plated
(Lead Free)
SM3 = Solder Dipped
SM5 = Solder Dipped
(Lead Free)
40.0M ,
Frequency
K = kHz
M = MHz
100
Calibration
Tolerance
@ 25
0
C
(in ppm)
/
100
Frequency
Stability over
Temp. Range
(in ppm)
/
/
HG = High
Shock.
Otherwise
leave blank
Supply Voltage
1 = 1.8 V
2 = 2.5 V
3 = 3.0 V
4 = 3.3 V
5 = 5.0 V
Temp. Range:
C = -10
O
C to +70
O
C
I
= -40
O
C to +85
O
C
I
M = -55
O
C to +125
O
C
S = Customer Specified
OR
/
/
200
Total
Frequency
Tolerance
(in ppm)
/
I
Temp. Range:
C = -10
O
C to +70
O
C
I
= -40
O
C to +85
O
C
M = -55
O
C to +125
O
C
S = Customer Specified
10168 Rev C
S
YS
C
ERT
I
F
I
C
TEM
AT
N
IO
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256
www.statek.com
IS
O
01
90
京公网安备 11010802033920号
EEWORLD
