3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
MP2 Series
• Three levels of early mate, late break (EMLB)
sequencing or selective loading options
• Footprint compatible with standard
Futurebus+®
• Solder tail with true-position wafer
• Ideal for hot swapping applications
• End-to-end stackable
• Right angle male for daughter card
• Mates with MP2-R for backplane applications
and MP2-SXXXG for coplanar applications
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: March 28, 2007
TS-1122-04
Sheet 1 of 4
Physical
Insulation
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact
Material: Copper Alloy
Plating
Underplating: 50
μ"
[1.27
μm]
Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating:
Signal: 1.5 A - All contacts simultaneously
Insulation Resistance:
10
3
MΩ
Withstanding Voltage:
1000 V
AC
Environmental
Temperature Rating:
-55°C to +125°C
Process Temperature Rating:
260°C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
MP2 Series
POSITION 1
POSITION 2
17.00
.669
"A"
13.00
.512
2.00
.079
TYP.
POSITION X
E D C B A
ROW
MATED WITH MP2-RXXX-5XXX-XXXX
17.80
.701
1.50
.059
2.00
.079
4X
MATING LENGTH
7.00
.276
16.80
.662
3.86
.152
4.00
.157
mm
[inch]
Tolerance Unless Noted
0
mm
±3
0.0
±0.3
0.00
±0.13
13.90
.547
3.75
.148
2.00
.079
4X
8.00
.315
2.00
.079
"B"
TYP.
TAIL LENGTH
[ ] Dimensions for Reference Only
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. For special pin arrangements, contact 3M.
Ordering Information
MP2 - PXXX - 5XM1 - XXXXX
P = Right Angle Header
Inversed
Pin Count
(See Table 1)
Rows
5 = 5 Rows
Loading Pattern and Tail
Length (See Table 2)
Termination Style
M = Solder Tail
Plating Options:
(SeeTable 3)
TS-1122-04
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
Table 1 - Connector & Row Lengths
Pin
Count
030
060
090
120
150
180
210
240
270
300
420
Dim. "A"
mm [inch]
11.95
23.95
35.95
47.95
59.95
71.95
83.95
95.95
107.95
119.95
167.95
[0.471]
[0.943]
[1.415]
[1.889]
[2.36]
[2.833]
[3.305]
[3.778]
[4.251]
[4.722]
[6.612]
Dim "B"
mm [inch]
10.00
22.00
34.00
46.00
58.00
70.00
82.00
94.00
106.00
118.00
166.00
[0.394]
[0.866]
[1.339]
[1.811]
[2.283]
[2.756]
[3.228]
[3.701]
[4.173]
[4.646]
[6.535]
MP2 Series
Rows
5
5
5
5
5
5
5
5
5
5
5
Table 2 - Mate & Tail Lengths, mm Vs. Loading Pattern
Loading
Pattern
1
2
3
4
5
6
7
8
9
A
B
C
D
F
G
Mate
Length
Row A
5.00
4.25
3.50
4.25
5.00
5.00
4.25
4.25
5.00
3.75
3.75
5.75
4.25
5.00
5.00
Mate
Length
Row B
5.00
5.00
4.25
5.00
5.00
4.25
5.00
4.25
3.50
4.50
4.50
5.75
5.00
5.75
4.25
Mate
Length
Row C
5.00
5.00
4.25
4.25
5.00
4.25
4.25
4.25
3.50
5.25
3.75
5.75
5.75
5.75
4.25
Mate
Length
Row D
5.00
5.00
5.00
4.25
5.00
5.00
5.00
4.25
3.50
4.50
4.50
5.75
5.00
5.75
5.00
Mate
Length
Row E
5.00
5.00
5.00
4.25
NA
NA
4.25
4.25
4.25
3.75
3.75
5.75
4.25
5.00
NA
Tail
Length
Row A
3.30
4.05
4.80
4.05
3.30
3.30
4.05
4.05
3.30
4.55
4.55
2.55
4.05.
4.05
3.30
Tail
Length
Row B
3.30
3.30
4.05
3.30
3.30
4.05
3.30
4.05
4.80
3.80
3.80
2.55
3.30
4.05
4.05
Tail
Length
Row C
3.30
3.30
4.05
4.05
3.30
4.05
4.05
4.05
4.80
3.05
4.55
2.55
2.55
4.05
4.05
Tail
Length
Row D
3.30
3.30
3.30
4.05
3.30
3.30
3.30
4.05
4.80
3.80
3.80
2.55
3.30
4.05
3.30
Tail
Length
Row E
3.30
3.30
3.30
4.05
NA
NA
4.05
4.05
4.05
4.55
4.55
2.55
4.05
4.05
NA
Description
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ROWS A, B, C, AND D
FILLED
ROWS A, B, C, AND D
FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ALL POSITIONS FILLED
ROWS A, B, C, AND D
FILLED
Table 3 - Plating
Plating
Suffix
Plating Composition
Plating
Suffix
Plating Composition
0.25 µm [10 µ"] Min. Au Contact Area
TG
(RIA E3 & C2 2.54 µm [100 µ"] Min. SnPb Tail Area
apply)
1.27 µm [50 µ"] Min. Ni all over
0.76 µm [30 µ"] Min. Au Contact Area
TG30
(RIA E3 & C2 2.54 µm [100 µ"] Min. SnPb Tail Area
apply)
1.27 µm [50 µ"] Min. Ni all over
0.08 µm [3 µ"] Min. Au Contact Area
TR30
0.67 µm [27 µ"] Min. PdNi Contact Area
(RIA E3 & C2
2.54 µm [100 µ"] Min. SnPb Tail Area
apply)
1.27 µm [50 µ"] Min. Ni all over
0.13 µm [5 µ"] Min. Hard Au Contact Area, Lubricated
1.02 µm [40 µ"] Min. PdNi Contact Area
TR40B
(RIA E3 & C2 0.10 µm [4 µ"] Min. Pd Contact Area
apply)
2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
0.25 µm [10 µ"] Min. Au Contact Area
FJ
(RIA E1 & C1 5.08 µm [200 µ"] Min. Matt Whisker Mitigating Sn Tail Area
apply)
1.27 µm [50 µ"] Min. Ni all over
0.76 µm [30 µ"] Min. Au Contact Area
KR
(RIA E1 & 5.08 µm [200 µ"] Min. Matt Whisker Mitigating Sn Tail Area
C1 apply)
1.27 µm [50 µ"] Min. Ni all over
1.27 µm [50 µ"] Min. Au Contact Area, Lubricated
RF
(RIA E1 & C1 5.08 µm [200 µ"] Min. Matt Whisker Mitigating Sn Tail Area
apply)
1.27 µm [50 µ"] Min. Ni all over
0.08 µm [3 µ"] Min. Au Contact Area
LR
0.67 µm [27 µ"] Min. PdNi Contact Area
(RIA E1 & C1
5.08 µm [200 µ"] Min. Matt Whisker Mitigating Sn Tail Area
apply)
1.27 µm [50 µ"] Min. Ni all over
0.13 µm [5 µ"] Min. Hard Au Contact Area, Lubricated
1.02 µm [40 µ"] Min. PdNi Contact Area
PD
(RIA E1 & C1 0.10 µm [4 µ"] Min. Pd Contact Area
apply)
5.08 µm [200 µ"] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ"] Min. Ni all over
TS-1122-04
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
8.00
.315
2.00
.079
2.00
.079
TYP.
A1
MP2 Series
4X
4.00
.157
1.00
.039
4.00
.157
12.00
.472
"B"
2.05
.081
+.05
-.00
+.002
-.000
O
TYP. UNPLATED THRU HOLE
l O
.10
1.50
.059
+.10
-.00
+.004
-.000
O
3.00
.118
TYP. UNPLATED THRU HOLE
l O
.10
"D" PLATED THRU HOLE
l O
.10
RECOMMENDED PCB HOLE MOUNTING PATTERN
Table 4 -- HOLE PLATING For TG, TG30, TR30, TR40B FINISHES ONLY
HOLE
"D"
Finished Dia.
mm [in]
0.65-0.80 [.0256-.0315]
Cu Thickness
mm [in]
0.025 [.001] min
SnPb Thickness
microns [µ"]
15 [600] max
Drilled Hole Dia.
mm [in]
0.81-0.86 [.0319-.0339]
Table 5 -- HOLE PLATING For FJ, KR, RF, LR, and PD FINISHES ONLY
Finished Dia.
mm [in]
0.700-0.800
[.0276-.0315]
Cu Thickness
mm [in]
0.025-0.045
[0.001-0.002]
Immersion
Matte Sn
Thickness
microns [µ"]
0.5 - 2.5
[20 - 100]
Electrolitic Au
Thickness
microns [µ"]
0.1 - 0.5
[4 - 20]
OSP ENTEK
Thickness
microns [µ"]
0.2 - 0.5
[8 - 20]
Drilled Hole Dia.
mm [in]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
Hole
"D"
1.25 INITIAL
.049
OFFSET ALLOWABLE
1.00 INITIAL
.039
OFFSET ALLOWABLE
1.5°
1°
INCLINATION TOLERANCES
TS-1122-04
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
Development Kits Review Area
京公网安备 11010802033920号
EEWORLD
