N SERIES MINI MODULE
Hypertac
Ò
mini-modular connectors employ a
do-it-yourself system based on the building block
principle. They offer a variety of combinations
available in a single connector frame. Therefore,
the user is capable of selecting the connector that
fulfills the exact requirements with off-the-shelf
components.
One of the many advantages of the Hypertac
Ò
contact is its low insertion and extraction forces.
In this application the user is able to assemble a
significantly large number of contacts into a
connector which is still able to mate and unmate
smoothly and easily
The N series can be built up for the following:
Rack and panel applications
--
Standard
--
With keying system
--
With locking systems
--
With floating mounting
Cable applications
--
Hooded with rounded or flat cable
security clamps
--
With jack screws
Programming applications
The system is composed of two basic elements:
the modules and the frames.
1. The modules are the connector elements of
the system. Two types of contacts are
available: signal and power. These contacts
are housed in small plastic blocks. All
contacts are removable for easy assembly
and repair. The width of each module block is
designated in units. Please see pages
N5--N7. The modules have 10 contacts @ 4
2.
Amps (Type P & K), 5
modules in position.
The frames hold the
contacts @ 9 Amps
They
T), 4 coax
basic frame consisting
45
(Type
range from a
@ 509s (Type V), and
of 2
side rails and 2 end caps to
contacts @ 1 Amp (Type H).
more complex
versions with jackscrews, hoods, cable
2. The frames hold the modules
available in
clamps, etc. All frames are
in position.
They range from a basic frame
to almost any
various lengths to conform
consisting of 2
side rails and
of
end caps to more complex
combination
2
modules. Although any
versions
possible, we suggest ordering one
length is
with jackscrews, hoods, cable
clamps, etc. All frames
optimum delivery
of the standard lengths for
are available in
various lengths to
be accomplished by filling
and price. This can
conform to almost any
combination
spaces with blank modules.
in any empty
of modules. Although any
length is possible, we suggest ordering one
With
the standard lengths
specially designed
of
the N series,
for optimum delivery
connectors can
can be accomplished by filling
and price. This
be purchased quickly and
inexpensively, eliminating the extra cost and
in any empty spaces with blank modules.
delay of custom tooling.
With the N series, specially designed
connectors can be purchased quickly and
inexpensively, eliminating the extra cost and
delay of custom tooling.
4 / 19
Hypertronics Corporation
Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
N SERIES MINI MODULE
Module H
Width is 2 units
.177
(4.49)
.431
(10.95)
45 Crimp Contacts
Current Rating
Contact Resistance
Extraction Force
Contact Life Cycles
Breakdown voltage
Dielectric
Withstanding Voltage
Insulation Resistance
Temperature Rating
Insulator
Contact
Material:
(pin)
(socket)
Plating
Reference
.016 (.40mm) contacts
GENERAL SPECIFICATIONS
1 amp
<8 milliohms
.3 -- 1.6 oz.
100,000
>750V RMS
>500V RMS
>10
3
megohms @ 500 VDC
--55 C to + 125 C
Nylon, 25% Glass
PhBz
BeCu wires + brass body
T = 10 in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
1.180
(29.98)
Male
.065
(1.65)
Typ.
CAGE
50541
Replacement
Contacts:
Crimp: 26-28AWG
Male Pin: YPN004--010H
Female Socket: YSK004--020AH
Wire Strip Length: 26-28 AWG
.909
(23.10)
.199 .065
(5.06) (1.65)
Typ.
.184
(4.68)
.177
(4.49)
Accessories
Crimp tool: AFM8 or M22520/2--01
Positioner: Socket =T1974
Pin = T1973
Insertion tool: T1970
Notes:
1)
2)
3)
4)
5)
Female
ORDERING INFORMATION
N H F R TAH
Plating: T, TH, TAH
Termination Style: R
Contact Gender:
M = Male, F = Female
For empty block, order ZNH045--001
Male contacts are shrouded in the insulator, female mounts in the plug frame are suggested.
Crimp contacts will be shipped unassembled.
For ordering information regarding modules assembled in frames, see pg. 4/30.
Dimensions in inches (mm).
Module K
File no. LR83002--4
Width is 1 unit
10 Hypertac removable signal contacts
.024” (.60mm) contacts
TERMINAL STYLE
.071
(1.80)
.035
(.900)
Hole
Ref. H2
GENERAL SPECIFICATIONS
Double crimp 22 AWG wire
stripped back .146 (3.70)
YPN006--019 (pin)
YSK006--009 (socket)
Current Rating
Contact Resistance
Extraction Force
Contact Life Cycles
Breakdown voltage
Dielectric
Withstanding Voltage:
Insulation Resistance
Temperature Rating
Insulator
Contact
Material:
(pin)
(socket)
Plating
Reference
4 amps
< 5 milliohms
.5 -- 2 oz.
100,000
>1400V RMS
>1050V RMS
>10
5
megohms @ 500 VDC
--55 C to + 105 C
Glass filled Nylon
Brass
BeCu wires + brass body
T = 10 in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
Male
.573
(14.55)
.736
(16.70)
Ref. R
A
Crimp 22 AWG wire
stripped back .173 (4.40)
YPN006--021 (pin)
YSK006--011 (socket)
.035 (.90)
Dimension A
Dimension B
.051 (1.30)
.100
(2.54)
B
1.180
(29.975)
.857
(16.70)
.039
(1.00)
Hole
Ref. RR
Crimp 18--20 AWG wire
YPN006--158 (pin)
YSK006--089 (socket)
.055 (1.39)
Dimension A
Dimension B
.071 (1.80)
stripped back .173 (4.40)
.055
(1.40)
Female
Notes:
.697
(17.70)
Ref. S
Solder cup 22 AWG
YPN006--020 (pin)
YSK006--010 (socket)
Crimp tool: AFM8
Positioner: K547
Extraction tool: S/DEM1.0060
ORDERING INFORMATION
N K F S T
Plating: T, TH, TAH
Terminal Style: H2, R, RR & S
Contact Gender:
M = Male, F = Female
1) For empty block, order ZNK010--001.
2) Contacts will be shipped unassembled
3) For ordering information regarding modules
assembled in frames, see pg. 4/30.
4) Dimensions in inches (mm).
5) Crimping instructions Doc# S50063
Accessories
4 / 20
Hypertronics Corporation
Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
N SERIES MINI MODULE
Module P
File no. E102195
File no. LR83002--4
Width is 1 unit
10 Hypertac
removable signal contacts
.024” (.60mm) contacts
TERMINAL STYLE
Ref. D
.024
(.60)
.181
(4.60)
.035
(.90)
.051
(1.30)
Straight solder dip
YPN006--047H (pin)
YSK006--032AH (socket)
.185
(4.70)
GENERAL SPECIFICATIONS
Current Rating
Contact Resistance
Extraction Force
4 amps
< 5 milliohms
.5 -- 2 oz.
Ref. FD
Front removable D
YPN006--493H (pin)
YSK006--264AH (socket)
Male
1.181
(30.00)
.141
(3.57)
.024
(.60)
.100
(2.54)
.039
(1.00)
.057
(1.45)
.181
(4.60)
Ref. R
Crimp 22, 24 & 26 AWG
stripped back .173 (44)
YPN006--025H (pin)
YSK006--015AH (socket)
100,000
Contact Life Cycles
Breakdown voltage
>1400V RMS
Dielectric Withstanding
1050 VRMS
Voltage:
Insulation Resistance
>10
3
Megohms @ 500 VDC
Temperature Rating
Insulator
Contact
Material:
(pin)
(socket)
Plating
Reference
--55 C to + 105 C
Glass filled Nylon
Brass
BeCu wires + brass body
T = 10 in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
.100
(2.54)
Ref. S
.433
(11.00)
.024
(.60) square
Solder cup up to 22 AWG
YPN006--026H (pin)
.201
YSK006--016AH (socket)
(5.10)
stripped back
Female
Ref. Y
.992
(25.20)
Wire wrap
YPN006--046H (pin)
YSK006--031AH (socket)
Crimp tool:
AFM8
Positioner:
K623
Extraction tool:S/DEM1.0060
Notes:
1) For empty block, order ZNP010--001
2) Crimp contacts will be shipped unassembled
3) For ordering information regarding modules assembled
in frames, see pg. 4/30.
4) Dimensions in inches (mm)
5) Crimping instructions Doc# S50063
Accessories
ORDERING INFORMATION
N P F S T
Plating: T, TH, TAH
Terminal Style: D, R, S & Y
Contact Gender:
M = Male, F = Female
Module T
File no. E102195
File no. LR83002--4
Width is 2 units
5 Hypertac
removable contacts
Current Rating
Contact Resistance
Extraction Force
Contact Life Cycles
Breakdown voltage
Dielectric
Withstanding Voltage:
Insulation Resistance
Temperature Rating
Insulator
Contact
Material:
Plating
Reference
.059 (1.50) contacts
9 amps
< 2.5 milliohms
.7 -- 5 oz.
100,000
>2000V RMS
1500
>10
5
megohms @ 500 VDC
--55 C to + 105 C
Glass filled Nylon
(pin)
(socket)
Brass
BeCu wires + brass body
T = 10 in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
TERMINAL STYLE
.108
(2.75
.256
(6.5)
.285
(7.25)
.075
(1.90)
GENERAL SPECIFICATIONS
Ref. R
Crimp 14, 16, 18 & 20 AWG
wire stripped back .285 (7.20)
YPN015--016H (pin)
YSK015--025AH (socket)
Crimp tool:
AF8
Positioner:
TP687
Extraction tool:S/DEM5.0150
.108
(2.75
Male
.200
(5.08)
.059 (1.5)
.191
(4.84)
.075
(1.90)
Ref. S
1.181
(30.00)
.200
(5.08)
.185
(4.70)
.047
(1.20)
square
1.362
(34.60)
Female
.551
(14.00)
Solder cup
up to 13 AWG
YPN015--017H (pin)
YSK015--026AH (socket)
Ref. V
Wire wrap
YPN015--018H (pin)
YSK015--027AH (socket)
.433(11.00)
Notes:
1)
2)
3)
4)
ORDERING INFORMATION
N T F S T
Plating: T, TH, TAH
Terminal Style: R, S & V
Contact Gender:
M = Male, F = Female
For empty block, order ZNT005--001.
Crimp contacts will be shipped unassembled.
For ordering information regarding modules assembled in frames, see pg. 4/30.
Dimensions in inches (mm).
Hypertronics Corporation
Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 21
N SERIES MINI MODULE
ORDERING INFORMATION
Module V
Coax
.441
(11.20)
Width:
2.5
Units
1.5
Gender
Contacts: 4 Hypertac
®
Contacts (on both signal & ground)
Part Number
NVFRTAH*
NVFR1TAH
*
Replacement Contacts
YCX0315--002AH
YCX0315--019AH
Termination
Crimp Coaxial
for RG316
Female
Crimp Coaxial
for RG316DB
Solder Coaxial
for RG405 or
T--Flex 405
Crimp Coaxial
for RG316
Crimp Coaxial
for RG316DB
Solder Coaxial
for RG405 or
T--Flex 405
.200
(5.10)
Female
NVFSTAH*
YCX0315--001AH
.290
(7.38)
.512
(13.00)
.290
(7.38)
NVMRTH*
NVMR1TAH
*
YCX0315--004H
YCX0315--018H
Male
MALE CRIMP
.129
(3.27)
.129
(3.27)
Ref. R & R1
(Crimp)
.290
.290
(7.38)
(7.38)
Male
NVMSTH*
YCX0315--003H
.020
(.51)
.250
(6.35)
.100
(2.54)
1.181
(30.00)
.100
(2.54)
Female
.024
( .061)
.181
(4.60)
Straight Dip
Coax
NVFDTAH
*
.250
(6.35)
Fixed Contacts
cannot be
removed
.512
.433
(13.00)
(11.00)
.024
(.060)
*Plating Reference
Male Pins:
H = 50 in gold (min)
over Ni
gold (min)
Female Sockets: AH = 50 in Extraction
over Ni on mating
Force
surface, gold flash
over Ni on termination
File No.: UL E102195
Notes:
1) For ordering information regarding modules assembled in frames, see pg. 4/30
2) Dimensions in inches (mm)
4 / 22
Hypertronics Corporation
Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
N SERIES MINI MODULE
General Specifications
TM
COAXTAC
Nominal Impedance
Frequency Range
Temperature Rating
Materials
50 ohms
DC 3 GHz with RG316
DC 18GHz with RG405
--55 C to 125 C
Brass, Beryllium, Copper
PTFE Fluorocarbon
ACCESSORIES
For Inner Conductor Crimping
Crimp tool: AFM8
Positioner: T1957
For Outer Conductor Crimping
Crimp tool: HX3
Die Set: T1958 for RG316
T2019 for RG316DB
Contact Removal Tool:
T1982
Cabling Instructions
Crimp (R) & (R1)
Cable
Socket
Pin
RG316 &
RG316DB
S50302
S50304
RG405
S50301
S50303
Solder (S)
T--Flex 405
S50307
S50308
Please request specs from our Customer Service Department
File No.: UL E102195
Finishes
Center Contacts and
Gold over nickel
Housings
over copper
Wire
Gold over nickel
Electrical
(Based on RG--405 Semi Rigid Cable)
Voltage Standing Wave Ratio
(DC to 3GHz) 1.20:1 max.
(3GHz to 18GHz) 1.50:1 max.
RF Transmission Loss
0.50 dB @ 18 GHz
Insulation Resistance
5,000 megohms min.
Dielectric Withstanding Voltage 500 VRMS
Contact Resistance
Inner Contact
8 miliohms max.
Outer Contact
2 milliohms max.
Mechanical
Extraction force
1.5 -- 6.0 oz max., 3 oz. average
Connector Durability
Greater than 25,000 cycles
GENERAL SPECIFICATIONS
Current Rating
(Bundled)
Contact Resistance
(milliohms)
Extraction Force
Contact Life Cycles
Breakdown voltage
Dielectric
Withstanding Voltage
Insulation Resistance
Temperature Rating
Insulator
Contact material:
Approx. Weight:
25 amps (Free Air) 17 Amps
<1.5 milliohms
3.0 -- 17.0 oz.
>100,000
>1600 VRMS
1200 VRMS
>10
4
megohms @ 500VDC
--55 deg. C to + 105 deg. C
Nylon
BeCu wires + brass
M: .32 oz. (9.15g), F: .34 oz. (9.50g)
Notes:
1) For ordering information regarding modules assembled in frames, see pg. 4/30.
2) Dimensions in inches (mm)
Hypertronics Corporation
Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 23
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
