IM-10RFCL-12
Vishay Dale
Inductors, Commercial, Molded, Axial Leaded
FEATURES
• Miniature shielded inductor
• High inductance-to-size ratio
• Inductance range is 0.10 μH to 180 000 μH
• Encapsulated non-flammable shielded unit
• 0.164" [4.17 mm] diameter by 0.450" [11.43 mm] long
envelope
• Offers extremely high inductance for density packaging
• Compliant to RoHS directive 2002/95/EC
ELECTRICAL SPECIFICATIONS
Inductance Tolerance:
± 10 % on Q-meter for 1 μH to
22 μH ± 5 % 1000 cps bridge for 27 μH to 10 000 μH
Note
• L and Q are not always tested at the same frequency.
Inductance values tested on Q-meter, are tested at standard test
frequencies.
Dielectric Strength:
700 V
RMS
at sea level
Operating Temperature:
- 55 °C to + 125 °C
Self-Resonant Frequency:
Minimum SRF measured with
full length leads on grid-dip meter
Q:
Measured on a Q-meter
Rating:
1
/
2
W dissipation for L models
DENSITY SPECIFICATIONS
Weight:
4.1 g maximum
ENVIRONMENTAL SPECIFICATIONS
Moisture Resistance:
Meets requirements of MIL-PRF-15305
Shock Resistance:
Meets requirements of MIL-PRF-15305
Vibration:
High frequency, 10 Hz to 2000 Hz at 20 G ± 10 %
maximum for 12 logarythmic swings, each of 20 min
duration repeated for each of three mutually perpendicular
planes
MECHANICAL SPECIFICATIONS
Terminal Strength:
Meets 5 lb pull test when tested per
MIL-PRF-15305 (latest revision)
DIMENSIONS
in inches [millimeters]
1.30 [33.02]
Typ. Min.
0.310 [7.87]
Dia. Max.
# 21 0.0285 ± 0.002
[0.724 ± 0.051]
TCW
0.900 [22.86]
Max.
STANDARD ELECTRICAL SPECIFICATIONS
IND.
TOL.
MODEL
(1)
(μH)
(%)
IM-10RFCL-12
1.0
± 10
IM-10RFCL-12
1.2
± 10
IM-10RFCL-12
1.5
± 10
IM-10RFCL-12
1.8
± 10
IM-10RFCL-12
2.2
± 10
IM-10RFCL-12
2.7
± 10
IM-10RFCL-12
3.3
± 10
IM-10RFCL-12
3.9
± 10
IM-10RFCL-12
4.7
± 10
IM-10RFCL-12
5.6
± 10
IM-10RFCL-12
6.8
± 10
IM-10RFCL-12
8.2
± 10
IM-10RFCL-12
10
± 10
IM-10RFCL-12
12
± 10
IM-10RFCL-12
15
± 10
IM-10RFCL-12
18
± 10
IM-10RFCL-12
22
± 10
Note
(1)
Model electricals and tolerances shown
Document Number: 34036
Revision: 15-Jul-09
Q
MIN.
130
130
130
130
130
100
100
80
75
65
65
65
75
75
75
75
75
TEST FREQUENCY Q
(MHz)
15
15
10
10
10
10
7.9
7.9
7.9
7.9
7.9
7.9
5.0
5.0
5.0
5.0
2.5
SRF MIN.
(MHz)
136
124
112
100
92
82
72
68
64
58
52
46
40
36
32
29
26
DCR MAX.
(Ω)
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.11
0.15
0.23
0.3
0.4
0.5
RATED DC CURRENT
(mA)
4000
4000
4000
4000
3500
3500
3500
3100
3100
3000
3000
2400
1800
1600
1300
1150
1000
For technical questions, contact:
magnetics@vishay.com
www.vishay.com
1
IRON CORE
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
