AZ986
40 AMP 280-ISO
AUTOMOTIVE
RELAY
FEATURES
•
•
•
•
•
•
•
40 Amp contact rating
High operating temperature (125°C)
SPST (1 Form A), SPDT (1 Form C)
Available with shrouded weatherproof cover
Coil suppression available
ISO/TS 16949, ISO9001, ISO 14000
Tested in accordance with SAE J2544
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 560 W (SPST)
560 W (N.O.)
420 W (N.C.)
Max. switched current: 40 A (SPST)
40 A (N.O.)
30 A (N.C.)
Max. switched voltage: 75 VDC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (max.)
Release Time (max.)
Minimum operations
1 x 10
7
1 x 10
5
at 40 A 14 VDC Res.
6 ms at nominal coil voltage
3 ms at nominal coil voltage
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.)
500 Vrms contact to contact
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
100 megohms min. at 500 VDC, 20°C
50% RH
Greater than 10% of nominal coil voltage
-55°C (-67°F) to 125°C (257°F)
-55°C (-67°F) to 155°C (311°F)
1.27mm DA 10-40 Hz
5 g 40-70 Hz
0.5mm DA 70-100 Hz
10 g 100-500 Hz
196 m/s
2
P.B.T. polyester
Tinned copper alloy
0.110 Quick Connect
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
Material
Resistance
Silver tin oxide
< 100 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
0.58 W
3.7 W at 20°C (68°F)
52°C (94°F) at nominal coil voltage
Max. 180°C (356°F)
Weight
Shock
Enclosure
Terminals
28 grams (37 grams shrouded version)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
8/13/09
AZ986
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
12
24
Must Operate
VDC
7.2
14.4
Max. Continuous
VDC
20.2
39.3
Coil Resistance
± 10%
109
436
RELAY ORDERING DATA
AZ986-1C-12DC2R1
Blank - Standard no diode, no resistor
R1 - 180 Ohm, ½ w resistor in parallel with 6 V coil
680 Ohm, ½ w resistor in parallel with 12 V coil
2700 Ohm ½ w resistor in parallel with 24 V coil
R2 - 220 Ohm, ½ w resistor in parallel with 6 V coil
820 Ohm, ½ w resistor in parallel with 12 V coil
3200 Ohm ½ w resistor in parallel with 24 V coil
D1 - 1A7 diode in parallel with coil, anode
on #86 terminal
D2 - 1A7 diode in parallel with coil, cathode
on #86 terminal
D3 - 1A4 diode in parallel with coil, anode
on #86 terminal
D4 - 1A4 diode in parallel with coil, cathode
on #86 terminal
C1 - Plastic dust cover unsealed
C2 - Plastic dust cover sealed
C3 - Plastic dust cover, shrouded, steel mounting
bracket, unsealed
C4 - Plastic dust cover, shrouded, steel mounting
bracket, sealed
24D - 24 volt coil
12D - 12 volt coil
1A - SPNO Single pole normally open
1C - SPDT Single pole double throw
Basic series designation - AZ986
8/13/09
京公网安备 11010802033920号
EEWORLD
