Model RFP-100NXXAF
RoHS
Compliant
Flanged Resistors
100
Watts, 50
General Specifications
Resistive Element
Substrate
Cover
Leads
Thick film
Aluminum nitride ceramic
Alumina ceramic
99% pure silver (.005” thick)
Features:
•
DC – see chart
•
100 Watts
•
Aluminum Nitride Ceramic
•
Non-Nichrome Resistive
Element
•
Welded Silver Leads
•
Low VSWR
•
100% Tested
Electrical Specifications
Attenuation Range:
Frequency Range;
Power:
VSWR:
1, 2, 3, 4, 5, 6, 9, 10, 20, 30 db
DC – see chart
100 Watts
1.25:1
Tolerance is
±0.010”,
unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. Operating temperature is -55ºC to 150ºC (see
chart for derating temperatures).
All dimensions in inches.
Specifications subject to change with out notice.
Outline Drawing
100NXXAF (097) Rev B
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model RFP-100NXXAF
Specifications:
RoHS
Compliant
Mounting Procedure:
Power derating:
SUGGESTED MOUNTING PROCEDURES:
1.
MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
POSITION DEVICE ON MOUNTING SURFACE AND SOLDER
IN PLACE USING AN APPROPRIATE TYPE SOLDER.
SOLDER LEADS IN PLACE USING AN APPROPPRIATE TYPE SOLDER
WITH A CONTROLLED TEMPERATURE IRON. KEEP LEAD
LENGTH AS SHORT AS POSSIBLE USING A SUGGESTED
STRESS RELIEF METHOD.
2.
3.
100NXXAF (097) Rev B
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.