-
Yesterday, Samsung released the Galaxy Note 10 series of mobile phones. For the first time, two models appeared, including the 6.3-inch Galaxy Note 10 and the 6.8-inch Galaxy Note 10+. They co...[Details]
-
Function and performance (1) Fully automatic intelligent control and protection with self-recovery protection function; fully electronic switch protection, no need for external fuses or other prot...[Details]
-
The purpose of the watchdog timer is to reset the microcontroller within a reasonable period of time after it enters an error state. After the watchdog is enabled, if the user does not feed th...[Details]
-
Some simple ultrasonic interference detectors do not need to be equipped with μP. The specific circuit is shown in the figure. When the SEL40k terminal is grounded, the clock signal can be generated ...[Details]
-
For many applications, modern logic analyzers can get to the root cause of trouble in less time than other instruments.
Logic analyzers are versatile tools that can help engineers with digital hardwa...[Details]
-
0 Introduction
DNC is the abbreviation of Direct Numerical Control or Distributed Numerical Control, which means direct digital control or distributed digital control. DNA integrates the equipment ...[Details]
-
In the unusual year of 2020, an epidemic that came without warning has profoundly changed people's lives and travel patterns; a sudden sanction has caused shock and reflection in the global semicondu...[Details]
-
It's time to take a serious look at driver monitoring systems (DMS)! In early June, a Tesla hit an overturned truck on a highway in Taiwan. Since then, this footage has appeared in almost all car m...[Details]
-
A network tester is also commonly called a professional network tester or a network detector. It is a portable, visual intelligent detection device that can detect the operating status of the physica...[Details]
-
According to data released by SEMI, mainland China's semiconductor manufacturing equipment procurement in the first quarter was US$5.96 billion, a year-on-year increase of 70%, second only to South K...[Details]
-
Nanjing Hexin Automation Co., Ltd. (hereinafter referred to as "Nanjing Hexin") was established in 2017. Its headquarters is located in Nanjing Xingang National Economic Development Zone. It has es...[Details]
-
Ultrasonic Sensors: There are trigger control end and echo receiving end: Whenever the trigger control terminal outputs a high level greater than 10US, it will drive the sensor to emit 8 40KHZ ultras...[Details]
-
Infrared thermal imaging cameras use photoelectric technology to detect infrared specific band signals of thermal radiation from objects, convert the signals into images and graphics that can be di...[Details]
-
There are 4 toggle switches above the buttons. Switches and buttons are very similar in principle and usage, but they have different uses - buttons will pop up when they are pressed and released, whi...[Details]
-
A multimeter is a commonly used measurement tool that can be used to measure parameters such as voltage, current, and resistance. However, for the measurement of temperature sensors, a multimeter m...[Details]