Datasheet for part number 121484-1016A
Our Catalog Part Number: CA06COM-PG24A24P-F0
Our Global Manufacturing Part Number: 121484-1016 A
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA COM
Product Datasheet
Thread
Shell Style
Endbell Style
Gender
Shell Size
Contact Arrangement
Number of contacts
Contact Type
Contact Plating
Contacts installed
Contact Rating at +20 °C (68 °F)
(Size 25/12)
Contact Resistance (Size 25/12)
Operating Voltage
Insulator Resistance
Test Voltage
Air and Creepage Paths (Min)
Ambient Temperature
Safety Provisions
Mating Cycles
Sep. Force per Contact (Size 25/12)
Gage
Coupling Torque
Contact Retention (Size 25/12)
Shell Material
Shell Plating
Insulator and Gromet Material
Contact Material
Harnessing Info: Contact Cross-Section
Harnessing Info: Insulator Diameter
Wire Stripping (Size 25/12)
General Info
Connector with Threaded Coupling
Plug, straight
Endbell for PG cable gland termination
Pin
24
24A24
12 contacts size 12
Solder Cup
Hard silver
no, delivery without contacts
41 A
3 mΩ
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
≥1000 MΩ
1600 Vrms
1,1 mm
Standard insulator material -55°/+125°C
(-67/257°F)
IP67 (only applies if a grommet is used)
500 min
1,5 N
For infos on Gage please see catalog
VG95234, part 1
Closing: 6 Nm max / Opening: 0,8 Nm min
55 N
Aluminium alloy
Nickel plated
CR-Elastomere
Copper alloy
See assembly instruction
See assembly instruction
6,2 mm
All tests in accordance with VG95319 and/or if
applicable with VG95210 except salt spray resistance
and heat and humidity endurance test
Specifications and dimensions subject to change.
Page 1 of 1