SCALE™-2 1SP0340x2x0-CM1200HC-90RA
1SP0340x2x0-CM1200HC-90RA
Preliminary Data Sheet
Compact, high-performance, plug-and-play single-channel IGBT driver based
on SCALE™-2 technology for individual and parallel-connected modules in
2-level, 3-level and multilevel converter topologies
Abstract
The SCALE™-2 plug-and-play driver 1SP0340x2x0-CM1200HC-90RA is a compact single-channel intelligent
gate driver designed for Mitsubishi IGBTs CM1200HC-90RA. The master driver 1SP0340V2M0-CM1200HC-90RA
features a fiber-optic interface. It can be used as stand-alone driver or in conjunction with up to three
1SP0340D2S0-CM1200HC-90RA slaves to drive up to four parallel-connected IGBT modules of type
CM1200HC-90RA.
The DC/DC power supply must be purchased as a separate unit (one per master driver).
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to:
www.power.com/igbt-driver/go/Plug-and-Play
Features
Applications
Plug-and-play solution
Allows parallel connection of IGBT modules
For 2-level, 3-level and multilevel topologies
Fiber-optic links (master)
Built-in interface to 1SP0340D2S0 (slave)
Duty cycle 0...100%
Dynamic Advanced Active Clamping DA C
Dynamic IGBT short-circuit protection
Monitoring of supply voltage
Monitoring of gate voltage
Extremely reliable; long service life
Shortens application development time
Suitable for CM1200HC-90RA
Lead-free
2
Traction
Railroad power supplies
Light rail vehicles
HVDC
Flexible AC transmission systems (FACTS)
Medium-voltage converters
Industrial drives
Wind-power converters
Medical applications
Research
And many others
www.power.com/igbt-driver
Page 1
SCALE™-2 1SP0340x2x0-CM1200HC-90RA
Preliminary Data Sheet
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
common data that apply to the whole series, please refer to the “Description & Application Manual for
1SP0340 SCALE-2 IGBT Drivers” on
www.power.com/igbt-driver/go/1SP0340.
When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a
particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes
the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other
than those specified. Incorrect use may result in failure.
Mechanical Dimensions
Dimensions: Refer to the relevant “Description and Application Manual”
Mounting principle: Connected to IGBT module with screws
Fiber-Optic Interfaces (1SP0340V2M0)
Interface
Drive signal input
Status output
Remarks
Fiber-optic receiver (Notes 1, 2)
Fiber-optic transmitter (Notes 1, 3)
Part type #
HFBR-2522ETZ
HFBR-1522ETZ
Electrical Connectors
Interface
Power supply connector X1
Bus connectors X2 and X3
Remarks
On-board connector (Note 4)
On-board connectors (Note 5)
Part type #
214012
214013
www.power.com/igbt-driver
Page 2
SCALE™-2 1SP0340x2x0-CM1200HC-90RA
Preliminary Data Sheet
Absolute Maximum Ratings
Parameter
Supply voltage V
DC
Average supply current I
DC
Average supply current I
DC
Gate output power
Switching frequency f
Gate peak current I
out
DC-link voltage
Operating voltage
Emitter-emitter voltage
|dV/dt|
Interface current
Operating temperature
Storage temperature
Remarks
VDC to COM
1SP0340V2M0 only (Note 6)
1SP0340V2M0 with three 1SP0340D2S0 (Note 6)
Ta ≤ 70°C
Ta ≤ 85°C
Ta ≤ 70°C
Ta ≤ 85°C
Note 7
Switching operation (Note 8)
Off state (Note 9)
Collector-emitter voltage
Between parallel connected drivers (Note 10)
Between parallel connected drivers (Note 11)
X2 and X3, total RMS value (Note 12)
X2 and X3, total peak value (Note 12)
Min
0
Max
Unit
-35
-40
-40
30
V
180
mA
620
mA
2.8
W
2.1
W
8.7
kHz
6.5
kHz
+35
A
3000
V
3550
V
4500 V
peak
200 V
peak
50 kV/μs
4
A
rms
20
A
peak
+85
°C
+90
°C
Recommended Operating Conditions
Power Supply
Supply voltage V
DC
Remarks
To COM
Min
23.5
Typ
25
Max
26.5
Unit
V
www.power.com/igbt-driver
Page 3
SCALE™-2 1SP0340x2x0-CM1200HC-90RA
Preliminary Data Sheet
Electrical Characteristics
All data refer to +25°C and V
DC
= 25V unless otherwise specified
Power Supply
Supply current I
DC
Power Supply Monitoring
Supply threshold V
iso
-V
ee
Monitoring hysteresis
Supply threshold V
ee
-V
COM
Monitoring hysteresis
Bus to 1SP0340D2S0
Supply voltage
Turn-off command
Turn-on command
Gate Monitoring
Turn-on threshold V
GE,on,min
Turn-off threshold V
GE,off,max
Filter delay
Short-circuit Protection
Static V
CE
-monitoring threshold
Response time
Remarks
Without load, only 1SP0340V2M0
Without load, per additional 1SP0340D2S0
Remarks
Clear fault
Set fault (Note 13)
Set/clear fault
Clear fault
Set fault (Note 13)
Set/clear fault
Remarks
Min
11.6
11.0
0.35
Min
Typ
47
20
Typ
12.6
12.0
5.15
4.85
0.3
Min
Typ
VDC
0
15
Min
Typ
12.9
-7.6
32
47
Min
Typ
170
6.5
6.5
6.5
9.7
0.3
Min
Typ
170
160
10
25
Max
Max
Max
Max
Max
13.6
13.0
Max
Unit
mA
mA
Unit
V
V
V
V
V
V
Unit
To COM
To COM
Remarks
G
mean
to E, set fault (Note 14)
G
mean
to E, set fault (Note 14)
Turn-on (Note 14)
Turn-off (Note 14)
Remarks
Between auxiliary terminals (Note 15)
DC-link voltage = 3000V (Note 16)
DC-link voltage = 2000V (Note 16)
DC-link voltage = 1500V (Note 16)
DC-link voltage = 1000V (Note 16)
After the response time (Note 17)
Remarks
Note 18
Note 18
G to E (Note 19)
G to E (Note 19)
V
V
Unit
V
V
μs
μs
Unit
V
μs
μs
μs
μs
μs
Unit
ns
ns
ns
ns
Delay to IGBT turn-off t
CSHD
Timing Characteristics
Turn-on delay t
d(on)
Turn-off delay t
d(off)
Output rise time t
r(out)
Output fall time t
f(out)
www.power.com/igbt-driver
Page 4
SCALE™-2 1SP0340x2x0-CM1200HC-90RA
Preliminary Data Sheet
Timing Characteristics
Transmission delay of fault state
Delay to clear fault state t
(block)
Acknowledge delay time t
d(ack)
Acknowledge pulse width t
(ack)
Gate Output
Turn-on gate resistor R
g(on)
Turn-off gate resistor R
g(off)
Auxiliary gate capacitor C
ge
Gate voltage at turn-on
Gate-voltage at turn-off
Footnotes to the Key Data
1)
2)
3)
4)
The transceivers required on the host controller side are not supplied with the gate driver. It is
recommended to use the same types as used in the gate driver. For product information refer
to
www.power.com/igbt-driver/go/fiberoptics.
The recommended transmitter current at the host controller is 20mA. A higher current may increase
jitter or delay at turn-off.
The typical transmitter current at the gate driver is 20mA. In case of supply undervoltage, the
minimum transmitter current at the gate driver is 14mA: this is suitable for adequate plastic optical
fibers with a length up to 10 meters.
This refers to the manufacturer ordering number, see
www.power.com/igbt-driver/go/ext_erni.
The
customer-side connector as well as cables with different lengths can be supplied by Power
Integrations. Refer to the “Description & Application Manual for 1SP0340 SCALE-2 IGBT Drivers” for
more information.
This refers to the manufacturer ordering number, see
www.power.com/igbt-driver/go/ext_erni.
These
connectors are to be used to connect 1SP0340V2M0 (master) or 1SP0340D2S0 (slave) to
1SP0340D2S0 (slave) if parallel connection of IGBT modules is required. Cables with different lengths
can be supplied by Power Integrations. Refer to the “Description & Application Manual for 1SP0340
SCALE-2 IGBT Drivers” for more information.
If the specified value is exceeded, this indicates a driver overload. It should be noted that the driver is
not protected against overload.
The gate current is limited by the gate resistors located on the driver and the load.
This limit is due to active clamping under switching conditions. Refer to the “Description & Application
Manual for 1SP0340 SCALE-2 IGBT Drivers”.
Due to the Dynamic Active Advanced Clamping Function (DA
2
C) implemented on the driver, the DC-
link voltage can be increased in the off-state condition (e.g. after emergency shut-down). This value is
only valid when the IGBTs are in the off state (not switching). The time during which the voltage can
be applied should be limited to short periods (< 60 seconds). Refer to the “Description & Application
Manual for 1SP0340 SCALE-2 IGBT Drivers”.
The maximum dynamic voltage between auxiliary emitters of parallel-connected drivers due to
asymmetrical operation at turn-on and turn-off must be limited to the given value.
Maximum allowed rate of change between auxiliary emitter voltages of parallel connected drivers.
Dynamic voltages between auxiliary emitters of parallel connected drivers at turn-on and turn-off lead
to equalizing currents over the X2 or X3 bus. The peak and RMS values of the resulting current must
be limited to the given value.
Undervoltage monitoring of the secondary-side supply voltage (Viso to Vee and Vee to COM which
correspond with the approximate turn-on and turn-off gate-emitter voltages). If the corresponding
Page 5
Remarks
Note 20
After IGBT short circuit (Note 21)
After gate-monitoring fault (Notes 21, 25)
Note 22
On host side
Remarks
Note 23
Note 23
Note 24
Note 24
Min
Typ
90
9
1
230
700
Typ
Max
Unit
ns
μs
μs
ns
ns
Unit
Ω
Ω
nF
V
V
400
Min
1050
Max
2.8
34
not assembled
15
-10
5)
6)
7)
8)
9)
10 )
11 )
12 )
13 )
www.power.com/igbt-driver
京公网安备 11010802033920号
EEWORLD
